FS: BEGI S5, Megasquirt I, EBC, etc.
 

Hey guys, I was in a huge accident this morning that destroyed my Miata. Looking at the car, I'm amazed that I came out completely unscathed. I didn't take pictures - but realize I should've to just to show you. It took a head on strike at freeway speeds and stayed together admirably.

Anyway, my sadness at the loss of a wonderful car can be your gain! I have my never installed BEGI turbo for sale as well as a bunch of other turbo related parts.

BTW, I'm just fine. Just seriously depressed :cry:

Here's what I'm selling

BEGI S5 w/2871 Turbo New Inbox: $3875 (cost me $4375 new!)
The system has pretty much all the standard stuff, with two exceptions: (1) It has the 2871 turbo included (a $200 option and a killer turbo) and (2) no MAF option - which I believe only changes the attachement point from the intake tube and the air filter.

SOLD! Megasquirt I PCB v3.57 with Miata Mods: $280
I have a Megasquirt I fully assembled PCB 3.57 built DIYAutotune. The PCB 3.57 is a surface mount board standardizes the part numbers used, as well as the assembly process, resulting in consistently high quality. All the Miata mods were made by DIYAutotune. I have also a Boomslang harness for near plug-n-play installation. Never been installed. Cost me $330+Miata Mod price (can't remember)+shipping new.

SOLD! Innovate LC-1 Wideband O2: $145
I have a Innovate LC-1 Wideband O2 sensor and controller new and in the box. Complete digital wideband controller in a sealed cable assembly. Bosch LSU 4.2 sensor included. The perfect low cost wideband solution! Cost me $199 New.

Mocal Oil Cooler kit. $189 from BAT Inc. I'm selling for $140 (EDIT $275 selling price with 13 Row Oil Cooler).
Straight from BAT Inc's website:
Option 4
Stainless Hose Kit w/thermo
part # KU10ST $189.00
(1) Mocal Sandwich Plate thermostatic
(2) 1/2" x -10an unions
(2) 1/2" sealing washers
(8') 5/8" i.d. hose stainless FBA1000
(2) 90 degree hose ends
(2) straight hose ends
(2) adell clamps
(2) oil cooler strap/bracket
(1) assorted hardware nuts/bolts

EDIT: I made an error in the ad. And, just posted the info on the kit (without the oil cooler). The kit cost me $189 and the 13 row oil cooler cost $135. So, that's $324 new. I'll sell the whole package (with 13 row oil cooler) for $275.

SOLD! GREDDY Profec Type S Electronic Boos Controller: $189
Costs $350 or so retail. Can be found for $199 on ebay on occassion. I'm selling for $189.

I'll items above are brand new, never installed. Offers considered. I'll sell it all for a discount! $4,400 takes it all vs $4629 piecemeal. PM me with offers, etc.

Sorry about your car. :cry:
PM'd on MS and oil cooler. Is this for 1.6?

Carl--glad you're OK man.
Hope insurance comes through and makes you whole.

Sucks about your car man, glad you're ok.

2nd dibs on the oil cooler if it's for a 1.6 and soulcarving passes it up.

PM'd about the WB.

Chris

Thanks guys.

The Oil Cooler is a generic kit from BAT Inc (Mocal's US distributor). So, it will require cutting the staineless steel lines to length and attaching the -AN fittings.

Hi Carl,

I just replied to your ad on teh m.net classifieds regarding the Profec. Is it new or used?

Also you guys, that oil cooler kit is the installation kit only, no oil cooler included.
http://64.202.180.37/files/coolkit.pdf

C

profec is new

thanks Chris. I made an error in the ad. And, just posted the info on the kit (without the oil cooler). The kit cost me $189 and the 13 row oil cooler cost $135. So, that's $324 new. I'll sell the whole package (with 13 row oil cooler) for $275.

Cool - thought I'd save you some trouble by pointing out the oil cooler.

C

pm sent

dibs on LC1. sending Pm

i hope thats not on the LC1

Interested in the cooler kit. What series cooler is it 235 or 115? What fittings are on the cooler?

PM'd back about WB.
Paypal is incoming pending address and phone number.

Chris

Soflarick, it's a 235mm Oil Cooler with -10AN fittings. 13 Row.
Chriscar, I added the oil cooler and changed the price above.

I sent you an email to the email address you sent. But, I haven't gotten an additional PM or email from you.

:)

it was...

pm sent on ms

Paypal sent for WB.


Chris

Update:

BEGI S5 w/2871 Turbo New Inbox PRICE REDUCED! $3500! That's nearly $900 less than it cost me! Come on guys, this thing is NEW IN BOX and I've got to sell it. Cost me $4375 new!
The system has pretty much all the standard stuff, with two exceptions: (1) It has the 2871 turbo included (a $200 option and a killer turbo) and (2) no MAF option - which I believe only changes the attachement point from the intake tube and the air filter.

SOLD! Megasquirt I PCB v3.57 with Miata Mods: $280
I have a Megasquirt I fully assembled PCB 3.57 built DIYAutotune. The PCB 3.57 is a surface mount board standardizes the part numbers used, as well as the assembly process, resulting in consistently high quality. All the Miata mods were made by DIYAutotune. I have also a Boomslang harness for near plug-n-play installation. Never been installed. Cost me $330+Miata Mod price (can't remember)+shipping new.

SOLD! Innovate LC-1 Wideband O2: $145
I have a Innovate LC-1 Wideband O2 sensor and controller new and in the box. Complete digital wideband controller in a sealed cable assembly. Bosch LSU 4.2 sensor included. The perfect low cost wideband solution! Cost me $199 New.

SOLD! Mocal Oil Cooler kit. $189 from BAT Inc. I'm selling for $140 (EDIT $275 selling price with 13 Row Oil Cooler).


SOLD! GREDDY Profec Type S Electronic Boost Controller: $189
Costs $350 or so retail. Can be found for $199 on ebay on occassion. I'm selling for $189.

Just separate the parts. But make sure you have buyer for every single parts. Bump for great deal though!