FS: MS1, Precision Turbo, Tial 38mm Wastegate, Magnaflow Muffler
Thread Starter
Newb
Joined: Nov 2011
Posts: 20
Total Cats: 0
From: Tennessee
FS: MS1, Precision Turbo, Tial 38mm Wastegate, Magnaflow Muffler
Payment accepted via paypal, no payments, prices are shipped to lower 48 US.
Brain Built MS1 V3.0, BNIB 64 pin connector, Serial to USB tuning cable, GM IAT Sensor - $250 Shipped OBO
The harness is mangled, expect to rebuild it. I bought a new connector from DIYPNP to do this and will include the new connector in this sale. I bought this and never hooked it up to anything, it has sat in the box all this time. This means its untested. Was told this came off of a 96 by the previous owner.
Tial MV-S 38mm External Wastegate - $200 Shipped OBO
Brand new, mocked up on manifold but never on running car.
Includes:
MV-S Assembly
Inlet V-band clamp
Inlet Flange
Outlet V-Band Clamp
Outlet Flange
2 TiAL Air Fittings
Plugs for unused air ports
All springs
Does NOT Include:
MV-S Valve Seat
The MV-S Valve Seat is currently welded to the manifold so you'll need to get a new one.
Precision MFS 5831 Turbo - $500 Shipped OBO
http://www.precisionturbo.net/turboc...--5831-MFS/492
Brand new, mocked up on manifold but never on running car, I'm including the oil return and oil feed flanges that are bolted on the turbo.
T3 4 Bolt discharge
Magnaflow 14589 Polished Performance Muffler 5x11x22 Oval 3" Center/Offset - $100 Shipped OBO
Brand new, bought from ebay and never even opened the box, I'll tape that hole up good before I ship it.
Brain Built MS1 V3.0, BNIB 64 pin connector, Serial to USB tuning cable, GM IAT Sensor - $250 Shipped OBO
The harness is mangled, expect to rebuild it. I bought a new connector from DIYPNP to do this and will include the new connector in this sale. I bought this and never hooked it up to anything, it has sat in the box all this time. This means its untested. Was told this came off of a 96 by the previous owner.
Tial MV-S 38mm External Wastegate - $200 Shipped OBO
Brand new, mocked up on manifold but never on running car.
Includes:
MV-S Assembly
Inlet V-band clamp
Inlet Flange
Outlet V-Band Clamp
Outlet Flange
2 TiAL Air Fittings
Plugs for unused air ports
All springs
Does NOT Include:
MV-S Valve Seat
The MV-S Valve Seat is currently welded to the manifold so you'll need to get a new one.
Precision MFS 5831 Turbo - $500 Shipped OBO
http://www.precisionturbo.net/turboc...--5831-MFS/492
Brand new, mocked up on manifold but never on running car, I'm including the oil return and oil feed flanges that are bolted on the turbo.
T3 4 Bolt discharge
Magnaflow 14589 Polished Performance Muffler 5x11x22 Oval 3" Center/Offset - $100 Shipped OBO
Brand new, bought from ebay and never even opened the box, I'll tape that hole up good before I ship it.
Last edited by McLeary; Sep 4, 2012 at 06:03 PM.
Reply
0
0
Thread Starter
Newb
Joined: Nov 2011
Posts: 20
Total Cats: 0
From: Tennessee
All I know about this particular one is that its currently set up for a 96. I was going to have it re-built for a 95. From what I know of these, if you have the knowledge, you can mod these boards and harnesses to be for any 1.8L.
Reply
0
0
Newb
Joined: Oct 2012
Posts: 13
Total Cats: 0
Curious sorry i read through the posts but still unsure... would the MS be compatible for a 97 1.8L? and i see that you said the harness is mangled, so i'm guessing it needs to be re wired into the new one (is it plug and play for a 1.8 ecu?)
Reply
0
0
Thread Starter
Newb
Joined: Nov 2011
Posts: 20
Total Cats: 0
From: Tennessee
I bought it working under the assumption that it can be built for any 1.8l NA. I honestly don't know enough about MS to tell you for sure though. It was inexpensive enough that I took the risk. I do know for sure the answer is on this forum though, lots of incredible MS knowledge here.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
