FS: PARTING OUT 1996 Starlight Blue M-Edition + tons of AFTERMARKET PARTS!
14 Attachment(s)
I'm parting out a 1996 Starlight Blue M-Edition Miata with 139,xxx miles. The crank got messed up after the timing belt was changed and the timing belt snapped, so the car doesn't run but everything else is good. If you don't see the part on the car, I probably have it in a pile of parts somewhere, just ask. Anything and everything on the car is for sale, buyer pays shipping. Send me a PM with what you need, how much I want for it, and we'll go from there. I do work full time, so please be patient for me to get things off the car and shipped out, I am active on here so I will be doing my best to please everyone. I will update all lists when parts sell.
Things already sold from the car:
Aftermarket things that are still for sale: AEM Fuel/Ignition Controller w/ PNP Boomslang harness, box/software included - $400 shipped TurboXS recirculating blow off valve (RFL BOV) - $75 shipped Stewart Warner 15 PSI boost gauge - $35 shipped NA custom white face gauges w/ chrome rings - $60 shipped NA baby teeth (front tow hooks) - $20 shipped 1.8L valve cover gasket - $8 shipped 1.8L alternator belt - $8 shipped Pioneer DEH-2100 radio, no harness - $20 shipped Cobra 9 band radar detector - $30 shipped That's all I can think of off the top of my head right now, I will add aftermarket parts to the list as I come across them. If you would like pictures of something that I don't have below, please contact me. https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 https://www.miataturbo.net/attachmen...ine=1341357601 |
PM sent!
|
Would you be interested in selling just the drivers side headlight lid?
|
Magnaflow catalytic converter
Dibs on the cat if it is functioning properly.
I also need: -the plastic lens for the map light above the rear view mirror -drivers side front turn signal Thanks, Chris |
PMd about vmaxx's
|
Originally Posted by miatadriver
(Post 897964)
Would you be interested in selling just the drivers side headlight lid?
Originally Posted by roadsterdoc
(Post 897971)
Dibs on the cat if it is functioning properly.
I also need: -the plastic lens for the map light above the rear view mirror -drivers side front turn signal Thanks, Chris
Originally Posted by redturbomiata
(Post 897974)
PMd about vmaxx's
|
danggg those vmaxxs sold fast :(
can i get some more info on the agxs w/ summit springs? -mileage? -spring rates? -lowering height? thanks |
1 Attachment(s)
Originally Posted by cruiseMain
(Post 897982)
danggg those vmaxxs sold fast :(
can i get some more info on the agxs w/ summit springs? -mileage? -spring rates? -lowering height? thanks Here is my car on them, they could be lowered a little more if you remove the allen bolts, but I didn't bother. It is a very functional setup. https://www.miataturbo.net/attachmen...ine=1341202648 |
i like those spring rates, just concerned about how much those agxs can handle, i thought they were maxed out at ~375?
|
Originally Posted by _spyder
(Post 897979)
Cat functions great, just replaced it with a test pipe because I don't have emissions. Plastic lens is yours if you want it. Which turn signal? The front clear one, or the side orange one? PM me what you want and we can figure out a shipped price.
I need the driver's front clear turn signal if it's in decent shape, the one below the headlight. Thanks, Chris Robertson roadsterdoc@yahoo.com |
Dibs on the slim fans and shroud. Can Paypal tonight if needed.
|
Originally Posted by cruiseMain
(Post 897985)
i like those spring rates, just concerned about how much those agxs can handle, i thought they were maxed out at ~375?
Originally Posted by roadsterdoc
(Post 897987)
Please email me. I just joined so my post count is too low to send a PM! I've been on the other forum for years.
I need the driver's front clear turn signal if it's in decent shape, the one below the headlight. Thanks, Chris Robertson roadsterdoc@yahoo.com
Originally Posted by viperormiata
(Post 897988)
Dibs on the slim fans and shroud. Can Paypal tonight if needed.
|
Aluminum slim fans w/ shroud and Magnaflow high flow catalytic converter sold!
|
I just made an account after lurking for a few months and I cant PM yet. Do you have the exhaust cam for sale?
|
Originally Posted by asmasm
(Post 898152)
I just made an account after lurking for a few months and I cant PM yet. Do you have the exhaust cam for sale?
|
Both sets of KYB AGXs sold!
Everything is OBO, if you need anything off the car, let me know! |
Vented headlight lids sold!
Gimme offers on anything guys! |
I need the glove box. Shoot me a price shipped to 23116.
|
Price on rt front fender, trunk lid, and fuel lid shipped to 78841.
|
Originally Posted by zeroox
(Post 898738)
I need the glove box. Shoot me a price shipped to 23116.
Originally Posted by yellowihss
(Post 898748)
Price on rt front fender, trunk lid, and fuel lid shipped to 78841.
|
Track Dog Racing header blanket sold!
Gonna start ripping into the car tomorrow and get the sold things boxed up and sent out ASAP. Gimme offers on things and I'll do my best to get them off the car tomorrow! |
To everyone that's bought stuff, I haven't shipping anything out. Like I said in the initial post, please be patient.
I'm still working on getting things off the car. I work 7am-5pm all week and the post office isn't open before or after work. I had today off and got some stuff off. Couldn't get too much done because the heat index was at 116 degrees here in Wisconsin. Hottest day in my life, no joke. As a honest seller, I feel obligated to keep everyone in the loop. I appreciate your patience, things should be shipping out Saturday at the latest. |
how much for the boomslang harness?
|
Originally Posted by phee
(Post 909321)
how much for the boomslang harness?
|
Might be interested in the baby teeth, just need to check a couple more things before I commit.
|
i can't pm you back but if you change your mind about selling the harness separately let me know. i already have an FIC. it's a 1910 model but i think that will work fine with the miata.
|
Gauge hood and metal piece screwed on to the top of the bumper?
Also, if you're willing to do some cutting of the chassis, tell me. I'd like to take the piece that the bumper metal piece bolts to and graft it onto another chassis. |
2 Attachment(s)
I want the hose circled in red, $5 plus my shipping cost?
|
Originally Posted by Leafy
(Post 909351)
Might be interested in the baby teeth, just need to check a couple more things before I commit.
Originally Posted by phee
(Post 909613)
i can't pm you back but if you change your mind about selling the harness separately let me know. i already have an FIC. it's a 1910 model but i think that will work fine with the miata.
Originally Posted by curly
(Post 909615)
Gauge hood and metal piece screwed on to the top of the bumper?
Also, if you're willing to do some cutting of the chassis, tell me. I'd like to take the piece that the bumper metal piece bolts to and graft it onto another chassis. Gauge hood has been sold.
Originally Posted by RyanRaduechel
(Post 909639)
I want the hose circled in red, $5 plus my shipping cost?
PayPal: soccerboy11@sbcglobal.net |
No, the big bracket that runs the length of the bumper and bolts to the core support.
|
I'll take that valve cover gasket. PM me paypal info.
|
emailed you, i also want the speedo cable and the clip behind the cluster. if you can do that with the harness i can do your price!
|
Originally Posted by stinkycheezmonky
(Post 909674)
I'll take that valve cover gasket. PM me paypal info.
Originally Posted by phee
(Post 909693)
emailed you, i also want the speedo cable and the clip behind the cluster. if you can do that with the harness i can do your price!
|
Consider that ---- sold, I will PayPal you when I get off tonight
|
price on taillights ?
|
Originally Posted by turbotyla
(Post 910520)
price on taillights ?
Come on guys. I got tons of stuff left to this car. It's loaded, A/C, PS, power everything, cruise, etc. Tell me what you need, we'll settle on a price, and I'll ship it out! |
1 Attachment(s)
How about that bumper support bracket? This black thing that follows the red line:
https://www.miataturbo.net/attachmen...ine=1343864527 In fact, if you're willing to cut the chassis, I need the part that it bolts to as well. |
Originally Posted by curly
(Post 910528)
How about that bumper support bracket? This black thing that follows the red line:
https://www.miataturbo.net/attachmen...ine=1343864527 In fact, if you're willing to cut the chassis, I need the part that it bolts to as well. |
I PayPal'd you, sent my mailing address with the payment
|
Originally Posted by RyanRaduechel
(Post 910725)
I PayPal'd you, sent my mailing address with the payment
|
pmd
|
I've got no PM from you.
|
The headlight pop up, rods& connector-joint (the rod that push the headlight up and down). I need both side.
Also the driverside window regulator. Let me know total price shipped to 95131 |
Originally Posted by benmiata
(Post 911523)
The headlight pop up, rods& connector-joint (the rod that push the headlight up and down). I need both side.
Also the driverside window regulator. Let me know total price shipped to 95131 I'd like to keep the headlight assemblies together. I can't get much for them without the rods that move them. PM me if you're still interested. Everyone, let's move things! |
air box
price of complete air box and crossover tube. i need everything after the throttle body. price shipped to 46391 please. thanks!
|
How about the license plate light housing...Like all of it, from the two wires that go into each light, to the housing and the lens.....???
|
What color do the gauges light up as? Also, I'm in Wisconsin so I could always pick it up depending on which city you're in. Thanks.
|
Originally Posted by RyanRaduechel
(Post 912456)
How about the license plate light housing...Like all of it, from the two wires that go into each light, to the housing and the lens.....???
Originally Posted by RyanLewo
(Post 912498)
What color do the gauges light up as? Also, I'm in Wisconsin so I could always pick it up depending on which city you're in. Thanks.
They're the special M-Edition gauges. I'm in the Fox Valley, looks like you're quite a bit away from me. |
payment sent for the complete air cleaner assembly.. waiting on tracking number.
|
I shipped it out today, looks like you'll be getting it tomorrow. Emailing you the tracking number as we speak.
|
just recieved the airbox assembly. Packaged very well and shipped very quick.. thanks!
|
Originally Posted by zach1151
(Post 913534)
just recieved the airbox assembly. Packaged very well and shipped very quick.. thanks!
|
Got the hose yesterday, thank you sir. PM'd you about the license plate light stuff.
|
Hi - looking for both front fenders. I can ship boxes and cover shipping.
I'm too new here to PM :( I am established on Miata.net, S2KI.com , blah blah blah |
Originally Posted by tpc0531
(Post 913972)
Hi - looking for both front fenders. I can ship boxes and cover shipping.
I'm too new here to PM :( I am established on Miata.net, S2KI.com , blah blah blah Shoot me an email if you can't PM: soccerboy11@sbcglobal.net |
Hey, I'm back in for those baby teeth, I'm just waiting for someone to paypal me the funds for something they're buying from me and I'll shoot the funds over to you.
|
Originally Posted by Leafy
(Post 914142)
Hey, I'm back in for those baby teeth, I'm just waiting for someone to paypal me the funds for something they're buying from me and I'll shoot the funds over to you.
I've still got 90% of this car left, buy my stuff people! Give me offers! |
you have the hood, bumper cover, and headlights still?
|
PM sent, looking for a throttle body.
|
Originally Posted by elocneas09
(Post 916932)
you have the hood, bumper cover, and headlights still?
Originally Posted by JakeLS01
(Post 916941)
PM sent, looking for a throttle body.
Let's move this stuff people! |
All times are GMT -4. The time now is 08:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands