FS : VA - (Front end collision) 1995 Black Miata Complete Part Out / Misc 1.6 parts
21 Attachment(s)
Bought a wrecked 1.8 (with 55k on it) to fund my turbo build and decided at same time to clean the garage out. All the 1.6 parts were pulled with 95k miles on them. Everything except big (not shippable) items are for sale exclusively to this forum. Buy my stuff!!!!
Things I need and will trade for : 1.8 timing cover 1.8 (Brand new only) Built Internals Water Injection kit '01+ head 3.90 or 4.10 torsen (guts only) Pickup is prefered but will ship ANYTHING at your expense in the U.S. Rear Bumper - 100 + shipping Attachment 194635 Dash - 75 + shipping Attachment 194636 Windblocker - 30 + shipping Attachment 194637 Complete 1.6 airbox setup - 20 + shipping Attachment 194638 1.6 AFM - 20 + shipping RX7 AFM (painted black) - 30 + shipping 2x Coolant Reservoir - 15 each + shipping Windshield washer pump and tank - 25 + shipping 1.6 Fuel Pump (95k miles) - 10 + shipping Ebay External wastegate w/ flange - 50 + shipping Attachment 194639 Hardtop brackets - SOLD Turn Signal set - 30 + shipping passenger side turn signal - 15 + shipping 1.8 ECM - 50 + shipping 1.6 ac compressor (95k miles) - 30 + shipping 1.8 Coil pack (not sure if it works) - 10 + shipping Attachment 194640 OE Jack - 10 + shipping Rear Lower Control arms - 20 each + shipping 1.8 Evap Canister - 10 + shipping Attachment 194641 1.6 OE Fans - 10 each + shipping Center console (I have 2) - 20 each + shipping 1.8 Clutch Master Cylinder - 20 + shipping 1.8 Brake Master Cylinder - 20 + shipping 1.8 Power steering pump - 20 + shipping BOV Flanges - 5 + shipping Attachment 194642 Center trim surrounding - 15 + shipping 1.8 Flywheel - SOLD Black Glove box - SOLD Dimmer Switch - 10 + shipping Attachment 194643 OE 1.8 Front sway bar - 20 + shipping Power Steering Rack - 100 + shipping OE Seat Sliders/Brackets - 10 each + shipping Attachment 194644 Front Lower Control Arms - 20 each + shipping Attachment 194645 Aftermarket tail light set - SOLD Attachment 194646 Floor Mats - 10 for both + shipping Attachment 194647 Sun Visor set - 10 + shipping Attachment 194648 1.8 Blower motor - 20 + shipping Attachment 194649 1.6 Heater core - 20 + shipping 1.8 heater core - 20 + shipping Attachment 194650 AC Heater control unit - SOLD Attachment 194651 1.8 Fuel pump / sending unit - 30 + shipping Attachment 194652 Seat belt set - 20 + shipping Attachment 194653 Air vent pod - 5 each + shipping Attachment 194654 Smoked Front side markers - 20 + shipping Attachment 194655 Big Items I have pics available at request. Driver side door - complete (manual window, mirror, door panel, tinted (prolly 35%) - SOLD Passenger side door -complete (manual window, mirror, door panel, tinted (prolly 35%) - 100 Will strip doors if get enough interest in panels/skins seperate Gas Tank - 50 Open 4.10 Diff (carrier only) no axles or driveshaft- 100 Turn Signal Intakes TSI - SOLD Front Sub Frame - SOLD Rear Sub Frame - SOLD 5 speed transmission - SOLD AC Compressor - SOLD Finish Panel - SOLD Rear wingless trunk lid (good condition) - SOLD Soft Top - SOLD Passenger side tail light - ( good condition ) -SOLD 1.6 Valve Cover - (Painted Silver w/ aerosol) -SOLD All 4 Spindles - SOLD Front Upper control arms - SOLD Engine Wiring harness - SOLD 1.8 exhaust header- SOLD 1.8 exhaust mid pipe - SOLD Carpet - SOLD Sun Visor set - SOLD |
Is there any blood on the seats?
|
Just a little period blood.
|
I wonder if this is my old car... Where was it from in VA? :facepalm:
|
Originally Posted by KPLAFIN
(Post 624763)
I wonder if this is my old car... Where was it from in VA? :facepalm:
|
Pm me if you willing to part with the driver side QP an a price .
I might have a 1.8 valve cover to trade as well |
Originally Posted by Venice
(Post 624791)
Pm me if you willing to part with the driver side QP an a price .
I might have a 1.8 valve cover to trade as well |
Triangle Quantico i was going to ask about the rad support till i seen the left head light up close to the windsheilf an the fender pealed back like a banana....
|
Originally Posted by Venice
(Post 624796)
Triangle Quantico i was going to ask about the rad support till i seen the left head light up close to the windsheilf an the fender pealed back like a banana....
Local F yea! Yea all the front end stuff thats gone is trashed. Lemme figure out what I gotta do to remove it and we can figure something out. Also, I have a truck and go to that area weekly for work so we can definitely work something out. |
Cool let me know i'm getting tired of wiping out the water in my trunk an looking at the huge fucking dent i have covered with ducktape so it dont look like total shit .
|
What do the front upper control arms look like? Are the ball joints in good shape?
And all spindles? I can work something out shipping/pick-up wise... |
did the car have ac? Looking at the picture, I am going to guess no but I just want to make sure. If not let me know how much for the heater/blower controls inside. Mine is fadded and the light shines through at night time. I will take a picture of what I am referring to if I didnt make any sense
thanks, Ryan |
Is there a clean title at the moment
|
Originally Posted by miatamike203
(Post 624977)
Is there a clean title at the moment
|
Originally Posted by RyanRaduechel
(Post 624962)
did the car have ac? Looking at the picture, I am going to guess no but I just want to make sure. If not let me know how much for the heater/blower controls inside. Mine is fadded and the light shines through at night time. I will take a picture of what I am referring to if I didnt make any sense
thanks, Ryan |
sorry, I meant the heater controller inside the car, I was asking if it had A/C or not because my car is non A/C and was looking for a heater controller without A/C.
|
Originally Posted by wrxnova
(Post 624990)
Dunno, why?
|
Wirelessly posted
Originally Posted by magnamx-5
Originally Posted by wrxnova
Dunno, why?
becouse he could turn it into a race car easily. |
why, WHY does it have to have POWER steering?! :mad:
|
still interested in control arms and spindles...
|
Originally Posted by Zabac
(Post 625244)
still interested in control arms and spindles...
|
How's the passenger door look? If it's good would you be able to remove it if a friend picked it up? I'm up in NY but I've got a friend who lives local to you but he's not mechanically inclined.
|
Originally Posted by johndoe
(Post 625470)
How's the passenger door look? If it's good would you be able to remove it if a friend picked it up? I'm up in NY but I've got a friend who lives local to you but he's not mechanically inclined.
|
How much do you want for it? You can keep the side mirror and interior panel if it'll lower the price at all. All I need is the skin and the glass.
|
I had hoped to sell the door complete since if I stripped 1 door i'd most likely need to do the same to the other so id have a set of door panels and mirrors. PM me an offer.
|
Interested in weather striping the goes in between the door and the window on drivers side. As well as the mirrors. I have a 1.8 Valve cover we can trade possibly? http://i55.tinypic.com/2hyezrq.jpg
|
Originally Posted by jtothawhat
(Post 625536)
Interested in weather striping the goes in between the door and the window on drivers side. As well as the mirrors. I have a 1.8 Valve cover we can trade possibly? http://i55.tinypic.com/2hyezrq.jpg
|
factory mud flaps by any chance? or rear lip?
|
Originally Posted by scooby steve33
(Post 625555)
factory mud flaps by any chance? or rear lip?
|
how's the trunk? Mine has hail damage. Is it wing-less?
|
Originally Posted by SlideRuler
(Post 625576)
how's the trunk? Mine has hail damage. Is it wing-less?
|
Sounds good, let me know as soon as you can.
PM me with price for All four spindles and front upper control arms if they are in good condition (i.e. not bent, no play/noise in bearing, no play in the ball joints) Sounds like you are mechanically inclined, so I'm sure you alread know my concerns... Thanks, Daniel ps-I do not care about the bushings. |
Engine, trans, and complete rear assembly were removed over weekend. Everything is very accessible now.
I updated the 1st post with prices. |
bump
|
Buy my stuff! This is the only forum the part out is listed (aside from body panels cause shipping them suck).
|
Added more pics to 1st post. PM/Post if you need anything not listed! Its all for sale!
|
I'll take valve cover if you can do $40 shipped. PM me if so, thanks.
|
Wirelessly posted
Originally Posted by jbrown7815
I'll take valve cover if you can do $40 shipped. PM me if so, thanks.
|
Money sent, thanks!
|
Bump
|
Bump!
|
kinda interested in the dash, if cheap enough. mine has a small crack and I don't like it.
|
Wirelessly posted
Originally Posted by soviet
kinda interested in the dash, if cheap enough. mine has a small crack and I don't like it.
|
Bump!
|
Buy my stuff
|
hi interested in ur turn signal intakes, and washer fluid res. if there still available. pm sent
|
how much for the wiring harness in the inside of the car, and in the right fender to the ecu?
pm me a price |
Originally Posted by proughj
(Post 633787)
how much for the wiring harness in the inside of the car, and in the right fender to the ecu?
pm me a price |
Cutting the car into pieces today bump.
|
Thanks again this guy is legit an cool as hell
|
Originally Posted by Venice
(Post 634280)
Thanks again this guy is legit an cool as hell
Updated first post with pics of various items still available. |
Bump
|
hey do u have...
the ecu harness still? i really need one
|
Originally Posted by plo_drift
(Post 635131)
the ecu harness still? i really need one
|
I want the turn signal intakes. I do have a '99 intake manifold and throttle body sitting in my living room too that I'm willing to part with ;) . Let me get a few pictures for you...I could also use a new latch for my glove compartment.
|
Originally Posted by cymx5
(Post 635145)
I want the turn signal intakes. I do have a '99 intake manifold and throttle body sitting in my living room too that I'm willing to part with ;) . Let me get a few pictures for you...I could also use a new latch for my glove compartment.
|
Ok. Would you be interested in the intake manifold still? I posted a few pictures below...to get a larger view you can copy the image address and change the "medium" to "large" at the end of the filename.
Either way, I could still use the glovebox latch (or entire glovebox). What would pricing be shipped to 60148? I just noticed the tail lights. Are those still available? They aren't the 'altezza' clear lights, right? It looks like they're on a black background... http://carphotos.cardomain.com/ride_...023_medium.jpg http://carphotos.cardomain.com/ride_...022_medium.jpg |
Originally Posted by cymx5
(Post 635148)
Ok. Would you be interested in the intake manifold still? I posted a few pictures below...to get a larger view you can copy the image address and change the "medium" to "large" at the end of the filename.
Either way, I could still use the glovebox latch (or entire glovebox). What would pricing be shipped to 60148? I just noticed the tail lights. Are those still available? They aren't the 'altezza' clear lights, right? It looks like they're on a black background... http://carphotos.cardomain.com/ride_...023_medium.jpg http://carphotos.cardomain.com/ride_...022_medium.jpg |
Bump
|
Bump for good seller.
|
All times are GMT -4. The time now is 10:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands