I've decided to put my recently completed setup for sale to help fund a new project I'm going to work on. I spent a lot of time designing and building this kit. It is currently still on my car, but it will be off the car next week when I'm building an exhaust for someone. If I get my asking price during next week, I will ship it out, if not, it will probably go back on the car for a little bit until I sell it.
Build pictures can be seen here:
https://www.miataturbo.net/showthrea...ght=wittyworks
Here are a couple pictures of the final setup:
Attachment 188595
Manifold is built from 1.5 inch schedule 40 mild steel and was ceramic coated titanium gray inside and out. It has a flange for the tial 38 mm wastegate which is included in the sale. It is a shorty tubular design and flows very well, and is very solid. Manifold has a t3 flange.
Downpipe is seperated gases, and has a flex pipe on the wastegate tubing to help with vibration. The 3 inch flex pipe is located after the v band from the downpipe to the midpipe.
Exhaust is full 3 inch the entire way back, and goes through a magnaflow 22 inch muffler, the biggest muffler that will fit on a miata. It is super quiet when cruising. I also will include a bracket I made that prevents the exhaust from knocking on hard right turns, which it seems most 3 inch systems do. The bracket works well, but if you dont want to use it I would suggest the corksport urethane exhaust hangers.
The turbo is a ebay t3/t4 that has over 14k miles on it. The last time I checked, it had increased the amount of shaft play, and I think it is on it's way out. If I get my asking price, I will include a brand new ebay t3/t4 with the kit. This kit would really kick ass with a 3071 turbo. Other option is that if you have a 3071 or other t3 turbo, You can send me the turbo and I can modify the downpipe to fit with whichever t3 turbo you want. Current turbo hits full boost around 4k rpms, and hits very hard.
Intercooler is a 27x7x2.5 inch ebay cxacing intercooler. I made full one piece aluminum charge piping, so there are a total of 4 silicone couplers on the entire intercooler setup. there are 3 bungs welded into the cold side piping, and a flange for the silicone intakes BOV. 1 bung for IAT sensor located to not heatsoak, 1 bung for a wastegate signal line, and one 90 degree fitting that hooks into the IAC valve. IAT is not included, but BOV is, though it is not the greatest blow off valve, it worked well for me.
I'm looking to get 1700 plus shipping for everything, but i will entertain offers, so send them by pm. This is everything you need to have a kickass turbo setup, minus ecu. If i get my asking price I will also include the turbo air intake and my cold air box setup.
If i get interest next week when it is off the car, I will be able to ship it as soon as I receive payment.
Thanks,
Evan