Garage Cleaning Sale
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
Garage Cleaning Sale
Ok guys. I have a garage full of old parts I no longer need.
Here are just a few of the things I have for sale.
I have several Miata Parts I would like to get rid of.
1) I have 2 diffs. One with 3.909 gears and the other with 3.636 gears. Both are Torsens, Both have new carrier bearings, New pinion bearings, new seals and were professionally set up by Top End Fabrication. I'll take $900 for the 3.636 and $700 for the 3.909.
2) I have a Hard Dog, Hard Core, Hard Top, Double Diagonal NA Roll bar with the roll bar pad and cover. Price new was $715.00. It was used for 1 autocross season. I'll take $400.00 for it.
3) I have a complete 1996 head. I'll take $100 for it.
4) I have a 2.5" Enthuza Car exhaust. It is the "Turbo Racer" with an extra resonator in the Mid Pipe. Comes with an Enthuza Car Cat delete pipe. Used for 1 autocross season. Was $510 new. I will take $400.00 for it.
5) A used set of front NA non ABS hubs. $20 - gone
6) N/A Driver and Passenger Air Bags. $50 for both
7) A set of 16" TSW Revo wheels with 215/40/16 Nitto Tires. The tires do have some camber wear. $200.
8) A set of 14x7 Hollow spoke, hollow pad Miata wheels with 205mm wide Nitto NT01's on them. Tires have SEVERAL autocrosses or track days left in them. $250
9) A set of 1996 Miata seats. Black. They have 2 Polk Audio 3.5" drivers in each head rest (speakers alone where $100 per set). Seats show some wear. Driver side has usual bolster wear and wear in the seat bottom, Passenger side has small hole in the seat bottom. Both have custom fitted black seat coveres. Comes complete with rails and sliders. $200.
10) Throttle Bodies. I have 3. $25 each
11) 1996 Intake Manifold. $50
12) 1996 AC System...complete. All lines, hoses, compressor, condenser...etc etc etc. $200.
13) Miata Starter $30
14) Extreme Cross Drilled Ultra Lightweight 1.8L Miata brake Rotors. Will throw in HAWK HP front and HP+ rear Pads only used for 6 Autocross events. $200
15) 1996 Miata ECU $10
16) CX Racing Aluminum Miata Radiator. Used for 2 Autocross seasons. $100 - Sold
17) 1.8L Harmonic Balancer and pulley boss. $20 - Sold
18) Stock 1996 Rods and pistons with 60K miles. $20
19) Miata Evap can $10
20) 1996 Non ABS Brake booster $20
21) 1996 Non ABS Master Cyl freshly rebuilt and used for 2 autocross seasons. $30
22) 1.8L Valve cover..Painter Silver $25
23) 1.8L Valve Cover painted black $30
24) 1.8L Stock fuel rail with good regulator. $25
25) Black Moss Motors Soft top cover for use with a Hard Top. $50
26) NA 1.8L stock coil packs. $30 each
27) NGK Plug wires $10
28) Rear non ABS hubs and spindles with new wheel bearings. No wheel studs or bushings. $40 for the pair. - Gone
29) 1994-1997 "Tombstone" in black. $10
30) Racing Beat Intake Elbow and MAF. $80
31) N/A Miata power antenna. $15
32) N/A Miata seat belts. Full Set $30
33) Set of Brand New N/A Headlight Bulbs. Sylvania Silverstars. $20 for the set
34) N/A Steering wheel with leather wrap. $20 or $40 complete with Airbag
All prices are OBO and DO NOT include Shipping. Shipping would be + actual shipping cost.
I have a TON of other parts laying around. Let me know what you want / need.
I am in Chattanooga TN and Travel to Knoxville and Nashville on a Regular basis.
Here are just a few of the things I have for sale.
I have several Miata Parts I would like to get rid of.
1) I have 2 diffs. One with 3.909 gears and the other with 3.636 gears. Both are Torsens, Both have new carrier bearings, New pinion bearings, new seals and were professionally set up by Top End Fabrication. I'll take $900 for the 3.636 and $700 for the 3.909.
2) I have a Hard Dog, Hard Core, Hard Top, Double Diagonal NA Roll bar with the roll bar pad and cover. Price new was $715.00. It was used for 1 autocross season. I'll take $400.00 for it.
3) I have a complete 1996 head. I'll take $100 for it.
4) I have a 2.5" Enthuza Car exhaust. It is the "Turbo Racer" with an extra resonator in the Mid Pipe. Comes with an Enthuza Car Cat delete pipe. Used for 1 autocross season. Was $510 new. I will take $400.00 for it.
5) A used set of front NA non ABS hubs. $20 - gone
6) N/A Driver and Passenger Air Bags. $50 for both
7) A set of 16" TSW Revo wheels with 215/40/16 Nitto Tires. The tires do have some camber wear. $200.
8) A set of 14x7 Hollow spoke, hollow pad Miata wheels with 205mm wide Nitto NT01's on them. Tires have SEVERAL autocrosses or track days left in them. $250
9) A set of 1996 Miata seats. Black. They have 2 Polk Audio 3.5" drivers in each head rest (speakers alone where $100 per set). Seats show some wear. Driver side has usual bolster wear and wear in the seat bottom, Passenger side has small hole in the seat bottom. Both have custom fitted black seat coveres. Comes complete with rails and sliders. $200.
10) Throttle Bodies. I have 3. $25 each
11) 1996 Intake Manifold. $50
12) 1996 AC System...complete. All lines, hoses, compressor, condenser...etc etc etc. $200.
13) Miata Starter $30
14) Extreme Cross Drilled Ultra Lightweight 1.8L Miata brake Rotors. Will throw in HAWK HP front and HP+ rear Pads only used for 6 Autocross events. $200
15) 1996 Miata ECU $10
16) CX Racing Aluminum Miata Radiator. Used for 2 Autocross seasons. $100 - Sold
17) 1.8L Harmonic Balancer and pulley boss. $20 - Sold
18) Stock 1996 Rods and pistons with 60K miles. $20
19) Miata Evap can $10
20) 1996 Non ABS Brake booster $20
21) 1996 Non ABS Master Cyl freshly rebuilt and used for 2 autocross seasons. $30
22) 1.8L Valve cover..Painter Silver $25
23) 1.8L Valve Cover painted black $30
24) 1.8L Stock fuel rail with good regulator. $25
25) Black Moss Motors Soft top cover for use with a Hard Top. $50
26) NA 1.8L stock coil packs. $30 each
27) NGK Plug wires $10
28) Rear non ABS hubs and spindles with new wheel bearings. No wheel studs or bushings. $40 for the pair. - Gone
29) 1994-1997 "Tombstone" in black. $10
30) Racing Beat Intake Elbow and MAF. $80
31) N/A Miata power antenna. $15
32) N/A Miata seat belts. Full Set $30
33) Set of Brand New N/A Headlight Bulbs. Sylvania Silverstars. $20 for the set
34) N/A Steering wheel with leather wrap. $20 or $40 complete with Airbag
All prices are OBO and DO NOT include Shipping. Shipping would be + actual shipping cost.
I have a TON of other parts laying around. Let me know what you want / need.
I am in Chattanooga TN and Travel to Knoxville and Nashville on a Regular basis.
#13
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
Hey guys. Thanks for the responses. I will reply to everyone today / tomorrow with shipping quotes. Been busy working to get the car ready for next season.
The Steering wheel is in decent shape. The underlying wheel has wear but the added custom leather cover is in good shape
I should be able to ship the Throttle body in a flat rate box, so shipping would be minimal..I don't have a spare throttle cable
I have a guy locally looking at the Roll Bar. I will get a shipping quote but I imagine it will be close to $100.
Don't have a NB1 Valve cover...sorry :(
I don't have a set of 94-95 rods and pistons.....so just buy the 1996 ones I have for sale
and I will get a quote on the Valve cover.
To those who have PM'ed me. I will get back to you shortly. I had to clean my inbox out.
I don't think I still have the washer bottle but I will check and let you know
The Steering wheel is in decent shape. The underlying wheel has wear but the added custom leather cover is in good shape
I should be able to ship the Throttle body in a flat rate box, so shipping would be minimal..I don't have a spare throttle cable
I have a guy locally looking at the Roll Bar. I will get a shipping quote but I imagine it will be close to $100.
Don't have a NB1 Valve cover...sorry :(
I don't have a set of 94-95 rods and pistons.....so just buy the 1996 ones I have for sale
and I will get a quote on the Valve cover.
To those who have PM'ed me. I will get back to you shortly. I had to clean my inbox out.
I don't think I still have the washer bottle but I will check and let you know