[UPDATED] Garrett turbo / RM 2.5" DP / 2.5" cat-back exhaust w/Magnaflow muffler
20 Attachment(s)
FOR SALE - Local Pick Up in Tampa, FL - Shipping Extra
[1] Garrett turbo from a Nissan CA18DET motor - $150.00 Oil & water-cooled. No shaft play and spins freely. [2] Racing Mazda 2.5-inch mild steel downpipe with flex section and flange to fit [1] above - $100 There is surface rust that can be cleaned with a wire brush and prepped for paint or coating. RM DPs had a tendency to crack around the flange welds and bends and this DP has been repaired an welded in the past. The welds aren't pretty, but there were no leaks when last used. [3] 2.5-inch cat-back mild steel exhaust with Magnaflow muffler and single exit exhaust. Exits at stock location - $100 [4] (SOLD)1.8L cast iron turbo manifold w/T25 flange (possibly BEGI?) - $125 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 https://www.miataturbo.net/attachmen...ine=1321987266 |
For reference, that's an HKS exhaust manifold. Good luck!
|
Interested in the turbo and manifold, Would you be willing to ship to UK?
Thanks, Adam. |
Originally Posted by ad-b
(Post 798525)
Interested in the turbo and manifold, Would you be willing to ship to UK?
Thanks, Adam.
Originally Posted by mrryanbaker
(Post 798508)
For reference, that's an HKS exhaust manifold. Good luck!
|
Is there an EGR bung?
|
Originally Posted by JerryMouse4U
(Post 798722)
Is there an EGR bung?
|
Originally Posted by Hammerhead
(Post 798735)
No EGR bung. No EGT probe bung.
|
[QUOTE=Hammerhead;798627]I would, but I don't know if that's cost effective for you. What's the cheapest method for shipping parcels from the US to the UK?
1.8 Turbo parts are super rare to get hold of in the UK, so works out cheaper finding something from the US. I'd probably just take the manifold though, because I think the extra weight of the turbo would really make it expensive to post. http://www.transglobal.org.uk/ - This seems to be the cheapest and it's a pretty fast service. If you can give me the dimensions of the manifold and it's weight, I'll see if i can get a definate price. Thanks, Adam. |
how much shipment to Italy for the turbo? Thanks!
|
Originally Posted by ilCoyote
(Post 798865)
how much shipment to Italy for the turbo? Thanks!
|
So does the Turbo and Manifold you're selling bolt together?
|
I'll buy the manifold paypal ready let's do it.
|
I'm definately 100% in on buying the manifold, these are so rare to get hold of in the uk.
If you want me to send over a deposit and then we will sort out postage. I found postage for about £35.00 which is roughly $54, with transglobal. |
Can you give any specs on this turbo or at least inform us how it should compare to a 2554 or sr20 turbo?
Ray |
I sure would love to get my hands on that manifold.
|
How's $450 shipped to 96821?
|
Hi, All! I apologize for responding late, but I have been busy with kids and family thru the holiday weekend. I have a local buyer for the manifold who dibbed early, but wasn't sure if they could come up with the funds. If that falls thru on Tuesday (11/29), I will validate the weight and shipping costs for those that expressed interest.
The other items are still up for grabs. In addition, I have a cat-back 2.5" exhaust with a Magnaflow single-exit muffler that fits with this turbo and DP setup ($100). I was saving it for use in another turbo setup I am building, but I opted for another exhaust. |
Those manifolds are pretty good and typically sell for ~$250 used from what I have seen. I've dealt with Hammerhead before and he is a good guy. GLWS.
|
what size piping is the downpip? is it the blue one or the other full size one with the flex pipe piece?
|
Originally Posted by xander071584
(Post 800269)
what size piping is the downpip? is it the blue one or the other full size one with the flex pipe piece?
|
would you take $50?
|
would u take $50?
|
Let me know if the other guy drops out of buying the manifold. Got the money waiting.
Adam. |
Originally Posted by xander071584
(Post 800604)
would you take $50?
|
Originally Posted by ad-b
(Post 800696)
Let me know if the other guy drops out of buying the manifold. Got the money waiting.
Adam. |
Boost bump. Doesn't someone need boos on the cheap? :)
|
Bump!
No reasonable offers refused! :) |
clear out your pm inbox so I can buy your turbo
|
So the cat back and downpipe will bolt together for a complete exhaust??? Hot pictures of the cat back?
|
Originally Posted by pusha
(Post 807682)
clear out your pm inbox so I can buy your turbo
|
Originally Posted by Hahnlsquid
(Post 807731)
So the cat back and downpipe will bolt together for a complete exhaust??? Hot pictures of the cat back?
Note: Turbo is sold, but the DP and exhaust is stilll available. You will need to cut the existing flange to the turbine and add whatever one you choose for your application. |
Is the wastegate opening on the downpipe welded up? or does it dump back into the downpipe? It looks closed off in the first pic but the turbos wastegate wasn't so I don't know. Thanks
|
Originally Posted by Jpopsbronco
(Post 808477)
Is the wastegate opening on the downpipe welded up? or does it dump back into the downpipe? It looks closed off in the first pic but the turbos wastegate wasn't so I don't know. Thanks
|
8 Attachment(s)
|
All times are GMT -4. The time now is 10:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands