Garrett turbo / RM DP / 1.8L turbo manifold
Thread Starter
Junior Member
Joined: May 2005
Posts: 150
Total Cats: -6
From: Tampa, FL
[UPDATED] Garrett turbo / RM 2.5" DP / 2.5" cat-back exhaust w/Magnaflow muffler
FOR SALE - Local Pick Up in Tampa, FL - Shipping Extra
[1] Garrett turbo from a Nissan CA18DET motor - $150.00
Oil & water-cooled. No shaft play and spins freely.
[2] Racing Mazda 2.5-inch mild steel downpipe with flex section and flange to fit [1] above - $100
There is surface rust that can be cleaned with a wire brush and prepped for paint or coating. RM DPs had a tendency to crack around the flange welds and bends and this DP has been repaired an welded in the past. The welds aren't pretty, but there were no leaks when last used.
[3] 2.5-inch cat-back mild steel exhaust with Magnaflow muffler and single exit exhaust. Exits at stock location - $100
[4] (SOLD)1.8L cast iron turbo manifold w/T25 flange (possibly BEGI?) - $125
[1] Garrett turbo from a Nissan CA18DET motor - $150.00
Oil & water-cooled. No shaft play and spins freely.
[2] Racing Mazda 2.5-inch mild steel downpipe with flex section and flange to fit [1] above - $100
There is surface rust that can be cleaned with a wire brush and prepped for paint or coating. RM DPs had a tendency to crack around the flange welds and bends and this DP has been repaired an welded in the past. The welds aren't pretty, but there were no leaks when last used.
[3] 2.5-inch cat-back mild steel exhaust with Magnaflow muffler and single exit exhaust. Exits at stock location - $100
[4] (SOLD)1.8L cast iron turbo manifold w/T25 flange (possibly BEGI?) - $125
Last edited by Hammerhead; Nov 29, 2011 at 05:31 PM. Reason: Manifold is sold. Added exhaust.
Reply
0
0
Thread Starter
Junior Member
Joined: May 2005
Posts: 150
Total Cats: -6
From: Tampa, FL
Thanks for the clarification! I got this manifold from another member and we couldn't ID it.
Reply
0
0
Newb
Joined: Feb 2011
Posts: 7
Total Cats: 0
[QUOTE=Hammerhead;798627]I would, but I don't know if that's cost effective for you. What's the cheapest method for shipping parcels from the US to the UK?
1.8 Turbo parts are super rare to get hold of in the UK, so works out cheaper finding something from the US.
I'd probably just take the manifold though, because I think the extra weight of the turbo would really make it expensive to post.
http://www.transglobal.org.uk/ - This seems to be the cheapest and it's a pretty fast service.
If you can give me the dimensions of the manifold and it's weight, I'll see if i can get a definate price.
Thanks,
Adam.
1.8 Turbo parts are super rare to get hold of in the UK, so works out cheaper finding something from the US.
I'd probably just take the manifold though, because I think the extra weight of the turbo would really make it expensive to post.
http://www.transglobal.org.uk/ - This seems to be the cheapest and it's a pretty fast service.
If you can give me the dimensions of the manifold and it's weight, I'll see if i can get a definate price.
Thanks,
Adam.
Last edited by ad-b; Nov 24, 2011 at 06:43 AM.
Reply
0
0
Newb
Joined: Feb 2011
Posts: 7
Total Cats: 0
I'm definately 100% in on buying the manifold, these are so rare to get hold of in the uk.
If you want me to send over a deposit and then we will sort out postage.
I found postage for about £35.00 which is roughly $54, with transglobal.
If you want me to send over a deposit and then we will sort out postage.
I found postage for about £35.00 which is roughly $54, with transglobal.
Reply
0
0
Thread Starter
Junior Member
Joined: May 2005
Posts: 150
Total Cats: -6
From: Tampa, FL
Hi, All! I apologize for responding late, but I have been busy with kids and family thru the holiday weekend. I have a local buyer for the manifold who dibbed early, but wasn't sure if they could come up with the funds. If that falls thru on Tuesday (11/29), I will validate the weight and shipping costs for those that expressed interest.
The other items are still up for grabs.
In addition, I have a cat-back 2.5" exhaust with a Magnaflow single-exit muffler that fits with this turbo and DP setup ($100). I was saving it for use in another turbo setup I am building, but I opted for another exhaust.
The other items are still up for grabs.
In addition, I have a cat-back 2.5" exhaust with a Magnaflow single-exit muffler that fits with this turbo and DP setup ($100). I was saving it for use in another turbo setup I am building, but I opted for another exhaust.
Last edited by Hammerhead; Nov 29, 2011 at 05:37 PM. Reason: Corrected misspelling.
Reply
0
0
Thread Starter
Junior Member
Joined: May 2005
Posts: 150
Total Cats: -6
From: Tampa, FL
Reply
0
0
