Good parts for sale
#1
Good parts for sale
Haltech Setup e6k setup - 550 shipped
-3 bar map sensor
-New bosch ignitor
-New denso coils
-Complete harness
-Switch panel w/ push button start
-Msd 8.5mm Wiresz
**Works with factory CAS, no mounting trigger wheels
* A note about the haltech. Do not be scared to have to wire this up, I have messed with a ton of stand alones with harnesses built from scratch. The haltech harness is all wired up. The best way to get this working is study the manual, study the wire diagrams, understand what you are doing. With that said, the only wires that have to be "wired up" are the constant 12 volt, and switched 12 volt. You can do this by wiring it up to the wires on the ignition switch, or running power to the switch panel and outputing that to the input on the haltech.
The only other wire that needs to be hooked up, is the output wire on the harness to the fuel pump. I would gladly provide help to whoever purchases the system if thats what you are worried about.
AEM wideband - 135 shipped SOLD
Complete gauge, harness, and sensor
Greddy EGT gauge - 95 shipped
Everything you need
I believe MOMO CLassic wheel W/ NRG quick release - 200 shipped
-Includes Mazda Speed center cap/button (Not pictured)
HID KIT - 40 shipped SOLD
Everything for install
2.5" Catback exhaust w/ Magnaflow muffler and Magnaflow resonater (Very slight rust, can be cleaned up before shipping out)- 275 + shipping
3" Catback exhast w/ Magnaflow muffler no resonator (Sounded very deep) (Very slight rust, I can clean it up before it ships out) - 275 + shipping
(NOT PICTURED)
Walbro 255 Brand New - 65 shipped SOLD
-3 bar map sensor
-New bosch ignitor
-New denso coils
-Complete harness
-Switch panel w/ push button start
-Msd 8.5mm Wiresz
**Works with factory CAS, no mounting trigger wheels
* A note about the haltech. Do not be scared to have to wire this up, I have messed with a ton of stand alones with harnesses built from scratch. The haltech harness is all wired up. The best way to get this working is study the manual, study the wire diagrams, understand what you are doing. With that said, the only wires that have to be "wired up" are the constant 12 volt, and switched 12 volt. You can do this by wiring it up to the wires on the ignition switch, or running power to the switch panel and outputing that to the input on the haltech.
The only other wire that needs to be hooked up, is the output wire on the harness to the fuel pump. I would gladly provide help to whoever purchases the system if thats what you are worried about.
AEM wideband - 135 shipped SOLD
Complete gauge, harness, and sensor
Greddy EGT gauge - 95 shipped
Everything you need
I believe MOMO CLassic wheel W/ NRG quick release - 200 shipped
-Includes Mazda Speed center cap/button (Not pictured)
HID KIT - 40 shipped SOLD
Everything for install
2.5" Catback exhaust w/ Magnaflow muffler and Magnaflow resonater (Very slight rust, can be cleaned up before shipping out)- 275 + shipping
3" Catback exhast w/ Magnaflow muffler no resonator (Sounded very deep) (Very slight rust, I can clean it up before it ships out) - 275 + shipping
(NOT PICTURED)
Walbro 255 Brand New - 65 shipped SOLD
Last edited by da chop; 09-25-2011 at 05:02 AM.
#4
im interested in the HID kit. you can email me at pbigo001@hotmail.com
I can ship this walbro to anywhere in the country for 5 dollars, I dont remember the last time I was at USPS,
If you want to pay the difference of flat rate - 5 for shipping, I will gladly send it your way
#9
Paying the difference in shipping costs is no problem at all. Just checking whether you would be willing to ship internationally.
Small flat rate box works out to around 13$ to my door, although it is a tight squeeze. We can call it 75$ shipped. You can contact me on damir130@gmail.com to work out details.
Small flat rate box works out to around 13$ to my door, although it is a tight squeeze. We can call it 75$ shipped. You can contact me on damir130@gmail.com to work out details.