|
Originally Posted by mca
(Post 561969)
Will the oil feed fit a GT2554?
Pokes, thanks for the feedback, glad everything got there safe and that you're happy with it. Hit me up if you have any questions. |
Bump for the turbo kit, need this sucker gone.
|
pm'd
|
PM replied to.
|
Deal pending on turbo kit.
Had lots of interst past few days...and get this, one of them is a local guy that wants to trade me a new AK-47 (Atlantic Arms) for it! I'm sure that would go over well with the wifey. |
Do it and carry the AK when you ride the motorcycle.
|
Originally Posted by mgeoffriau
(Post 563583)
Do it and carry the AK when you ride the motorcycle.
Turbo kit SOLD! Wheels, radiator, frame rails, rebuild parts/motors, delrin diff mounts, Bosch BOV with flanges, and eBay intercooler setup are still available. Most of this smaller stuff I'll let go for shipping, packing and a $20 spot on top. EDIT: Some prices lowered. |
bump
Still lots of parts available. Anyone willing to send money today or tomorrow before I put in a paypal deposit will get a good deal. Panasports can go cheap, just pay shipping. FM frame rails likewise, will go down on them if you can pay actual shipping. |
Carbing 3pt STB is also back up for sale.
It has a few scratches in the finish, but is still nice, unused (damage from sitting in PO's garage), and fit perfectly when I test fitted it. I can let that go for $250 shipped obo. |
Originally Posted by gospeed81
(Post 565062)
Carbing 3pt STB is also back up for sale.
It has a few scratches in the finish, but is still nice, unused (damage from sitting in PO's garage), and fit perfectly when I test fitted it. I can let that go for $250 shipped obo. |
PM'ed
|
Originally Posted by mgeoffriau
(Post 563583)
Do it and carry the AK when you ride the motorcycle.
I think that is on the 495 beltway somewhere in Northern VA. I can not figure out any other states that have hov signs like that and allow you to open carry. If I had a bike I would definitely goto the range with my ar-15 like that. |
STB pretty well sold.
Frame rails spoken for. Still have: Eibach 2.5" 200lb/in springs PWR radiator new alignment concentric bolts delrin diff bushings bosch recirc bov with two flanges rebuild parts 2 rebuildable motors engine hoist with load leveler $150 local |
Hey damon, I'm thinking those Pano's might go well with the ARTech exhaust I bought from you. Whadda ya think shiping, packing, etc. might cost?
EVERYBODY loves the exhaust note. It open up my bottom end torque a lot. Exhaust & beer shoud flow freely.;) |
Lars, I was looking for that pic like crazy could not find it, thanks for donating to the thread.
Originally Posted by luigi
(Post 565792)
Hey damon, I'm thinking those Pano's might go well with the ARTech exhaust I bought from you. Whadda ya think shiping, packing, etc. might cost?
EVERYBODY loves the exhaust note. It open up my bottom end torque a lot. Exhaust & beer shoud flow freely.;) Luigi, I'm glad to hear you like the exhaust. It is a really nice piece, and I knew you'd enjoy it. Spool should be like whoa with it too. The finish on the Panasports is not the greatest, and I polished one of the lips to see what it would take, but took some paint off the spokes in the process. They are priced accordingly since a set of these without tires usually goes for close to $500, but if finish is important or you don't want to do it then these will not make you happy. If you are a DIYer which I believe you said, and want to tackle them, or can wait until after finals when I can refinish them (polished lip, graphite centers) then we can work it out. Shipping should be $80-100. Tires are nearly new, and are surprisingly great at the ~200whp level. |
Originally Posted by gospeed81
(Post 565862)
Lars, I was looking for that pic like crazy could not find it, thanks for donating to the thread.
|
Oh yeah, one more item:
I still have an intercooler I bought off Arkmage that is still over at his house, but I can swing by on Monday to pick it up and ship it. It's in his thread, but it's the eBay standard with some pretty decent piping, couplers and t-bolts. |
If you were closer id pick up one of the motors...
|
Yeah, for someone local I've got quite the setup, especially if you plan on pushing a stock motor to the limit and being ready for the inevitable.
-HF $180 hoist with good load leveler -HF engine stand -rebuild tools (hone, micrometer, in/lb and ft/lb torque wrenches -Rosenthal rebuild kit -bearings, viton valve stems, ring set -two blocks, one with known bad rings, the other that's been immaculate upon disassembly, with the head now ported. |
9 Attachment(s)
Better pics of the panasports:
Attachment 198023 This is the one I polished the lip on: Attachment 198024 Attachment 198025 Attachment 198026 Attachment 198027 Eibach 200lb/in 2.5" x 7.5" springs Attachment 198028 BOV Attachment 198029 Diff bushings Attachment 198030 Full set of eccentrics Attachment 198031 I had listed prices earlier in the thread, but am open to offers on all of it. |
| All times are GMT -4. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands