Jfornachon Part out Rotrex, MSPNP, Injectors, Coils,
10-12-2011, 09:26 PM
#1
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Jfornachon Part out Rotrex, MSPNP, Injectors, Coils,
I have decided to part out certain parts of my car. Only what is listed will be for sale. I will have more at a later date. If you actually need pictures I can get them but I am in the middle of a move so it may take a bit to get them to you. I still use my car for DD and track. I am over it. I know I am very close to finishing the car and it would be amazing but I need money. If you are paying through paypal you pay all fees.
All parts are from my 2001 unless stated. All prices are with out shipping unless stated. Pleases no low baller offers, however I am open to reasonable offers. If listed as shipped it is to the lower 48 USA.
2001+ Reverant built MS. $600 Shipped
550cc RX7 injectors. Have about 9K miles on them. $180 shipped.(I can have them cleaned for you at your cost (usually about 125) and shipped directly to you).
12 tooth trigger wheel from TSE. Very lightly used about an hour $45 shipped
Shift-I shift light $130 Shipped.
4Toyota coils w/connectors. $140
01+ rotrex Base kit. You get what is listed in the kit with an extra belt. You may have to buy a belt depending on if you have A/C and P/S as I do not. Also fuel box is not the normal one it is a special box that is adjustable. The corssover tube has a IAT bung welded in right before the TB. Will not come with a sensor though. $2500
http://www.shop.kraftwerksusa.com/01...em-888-118.htm
Sparco steering wheel Black/Black/Black. The swede on the top is a little loose. It is not coming off it is just like it separated from the glue or what ever they used to affix it. $150
http://www.sparcousa.com/psteering_street.asp?id=290
Factory 99-00 injectors. Need to be cleaned. $80 Shipped (I can have them cleaned by RC engineering at cost (usually about $125) and shipped to you from them)
NB depowered P/s rack W/delrin bushings. Holes are plugged with plugs and packed with Redline High temp geese. I am open to a trade of a complete P/S system for my car. That is pump to rack I will need your rack first however since this is my DD. I will pay shipping for my rack.
Have a great day,
Jared
All parts are from my 2001 unless stated. All prices are with out shipping unless stated. Pleases no low baller offers, however I am open to reasonable offers. If listed as shipped it is to the lower 48 USA.
2001+ Reverant built MS. $600 Shipped
550cc RX7 injectors. Have about 9K miles on them. $180 shipped.(I can have them cleaned for you at your cost (usually about 125) and shipped directly to you).
12 tooth trigger wheel from TSE. Very lightly used about an hour $45 shipped
Shift-I shift light $130 Shipped.
4Toyota coils w/connectors. $140
01+ rotrex Base kit. You get what is listed in the kit with an extra belt. You may have to buy a belt depending on if you have A/C and P/S as I do not. Also fuel box is not the normal one it is a special box that is adjustable. The corssover tube has a IAT bung welded in right before the TB. Will not come with a sensor though. $2500
http://www.shop.kraftwerksusa.com/01...em-888-118.htm
Sparco steering wheel Black/Black/Black. The swede on the top is a little loose. It is not coming off it is just like it separated from the glue or what ever they used to affix it. $150
http://www.sparcousa.com/psteering_street.asp?id=290
Factory 99-00 injectors. Need to be cleaned. $80 Shipped (I can have them cleaned by RC engineering at cost (usually about $125) and shipped to you from them)
NB depowered P/s rack W/delrin bushings. Holes are plugged with plugs and packed with Redline High temp geese. I am open to a trade of a complete P/S system for my car. That is pump to rack I will need your rack first however since this is my DD. I will pay shipping for my rack.
Have a great day,
Jared
Last edited by Jfornachon; 10-25-2011 at 04:08 PM. Reason: lowered priceses
0
10-12-2011, 10:56 PM
#2
Junior Member
Join Date: May 2010
Location: Ventura County, CA
Posts: 45
Total Cats: 2
Im interested in the injectors but can't PM you, i don't have enough posts
Last edited by TSR85; 10-12-2011 at 11:00 PM. Reason: :(
0
10-12-2011, 11:18 PM
#4
Junior Member
Join Date: May 2010
Location: Ventura County, CA
Posts: 45
Total Cats: 2
The 550cc RX7 ones. sorry. you may be able to PM me your email address so we can work something out.
Last edited by TSR85; 10-13-2011 at 01:40 PM.
0
10-13-2011, 10:41 AM
#6
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
It should. I know it will mount up to the sire of the block and p/s pump bracket. The only problem I could see is the upper mount to the head. The L bracket may be different.
From my memory from what Oscar said was the only difference between the 1.6 & 1.8 kits are the L brackets and the size of the charger.
Have a great day,
Jared
From my memory from what Oscar said was the only difference between the 1.6 & 1.8 kits are the L brackets and the size of the charger.
Have a great day,
Jared
0
10-13-2011, 01:00 PM
#7
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Forgot to mention that the shift light is new. Just took it out of the box. Also most parts are still on the car and will be taken off next week.
Have a great day,
Jared
Have a great day,
Jared
0
10-22-2011, 10:48 AM
#15
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
To those who have bought parts I am sorry for the very slow replies. I am in the middle of a move. Your parts are boxed up and will be shipped out on monday via ups. I will confirm by Pm after I drop them off. Thank you for buying my parts.
Have a great day,
Jared
Have a great day,
Jared
0
10-29-2011, 07:22 PM
#18
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Pics will be coming soon. All but the injectors and trigger wheel are still for sale. I lowered the price o. The MS since there is a grouped buy on them. I didn't see that before I listed it up for sale and listed it for what I got it for.
Have a great day,
Jared
Have a great day,
Jared
0
