Koyo, rotrex, MS, koni, injectors, tail lights, sport brakes, torsen, & more. Buy it.
#1
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Koyo, rotrex, MS, koni, injectors, tail lights, sport brakes, torsen, & more. Buy it.
PLEASE READ THE WHOLE POST. ALL PARTS ARE OFF THE CAR. These are the parts that I have left that need to go. I will be shipping via UPS and the cost will be what I pay. Shipping will be extra and will be what I pay. I will do my best to up date this listing as best I can parts are for sale locally as well. I prefer local sale, but not opposed to shipping most parts.
I am open to offers, please no low baller offers on what is listed. No, I will not do $1500 for the rotrex. I want this stuff gone but also need money for a new car. I am willing to do package deals.
2500 01-05 rotrex supercharger C30-74 kit crossover pipe has a bung welded in for a AIT sensor.
500 MS PNP 01+ reverant built pnp ecu
250 De-powered rack W/plugs and delrin bushings, Pending sale
50 Mazdacomp Motor mounts,
450 ACT flywheel and clutch (stage one),
250 Koyo radiator 53mm Koyo Cap. Pending sale
100 for Eibach springs,
75 3 (2 rear and 1 front) Bilstien HD shocks (bent LF lower shock mount),
850 six speed transmission
50 99-00 injectors need to be cleaned. I can get it done for you at my cost
90 01+ injectors cleaned about 7K miles cince cleaned(2@280 & 2@281 both at 35psi)
1100 3.909 torsen diff Swap (swap includes drive shaft, axels, diff and carrier) perfect for the 1.6 cars,
20 Orange tow hook in front,
200 ea 01+ intake manifold I have 2 of them.
240 Koni yellow shocks used with dyno sheet. You are paying my cost on the dyno Sorry to have to pass it on to you.
200 01+ tail lights
I will do my best to get pictures in a timely manner. Life has been crazy lately.
Feel free to contact me via email or on my cell. Please be conscience of the time as I am in California.
CELL: 3one0-Seven40-77one6
E-Mail: my screen name @sbcglobal.net.
FOR PAYMENT PLEASE SEND VIA PAYPAL TO MY Screen Name @sbcglobal.net
Have a great day,
Jared
I am open to offers, please no low baller offers on what is listed. No, I will not do $1500 for the rotrex. I want this stuff gone but also need money for a new car. I am willing to do package deals.
2500 01-05 rotrex supercharger C30-74 kit crossover pipe has a bung welded in for a AIT sensor.
500 MS PNP 01+ reverant built pnp ecu
250 De-powered rack W/plugs and delrin bushings, Pending sale
50 Mazdacomp Motor mounts,
450 ACT flywheel and clutch (stage one),
250 Koyo radiator 53mm Koyo Cap. Pending sale
100 for Eibach springs,
75 3 (2 rear and 1 front) Bilstien HD shocks (bent LF lower shock mount),
850 six speed transmission
50 99-00 injectors need to be cleaned. I can get it done for you at my cost
90 01+ injectors cleaned about 7K miles cince cleaned(2@280 & 2@281 both at 35psi)
1100 3.909 torsen diff Swap (swap includes drive shaft, axels, diff and carrier) perfect for the 1.6 cars,
20 Orange tow hook in front,
200 ea 01+ intake manifold I have 2 of them.
240 Koni yellow shocks used with dyno sheet. You are paying my cost on the dyno Sorry to have to pass it on to you.
200 01+ tail lights
I will do my best to get pictures in a timely manner. Life has been crazy lately.
Feel free to contact me via email or on my cell. Please be conscience of the time as I am in California.
CELL: 3one0-Seven40-77one6
E-Mail: my screen name @sbcglobal.net.
FOR PAYMENT PLEASE SEND VIA PAYPAL TO MY Screen Name @sbcglobal.net
Have a great day,
Jared
Last edited by Jfornachon; 12-28-2011 at 03:24 AM. Reason: Update
#2
Txted you earlier for Fogs.. Will pick up tomorrow...
Thanks
Thanks
#5
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Less than a year. I will do my best to get pictures of it. It had some rust in it since I was running water water wetter, and a light mix of coolant. The car basically sat unused for most of that time. I actually flushed it a few times before I had her up and running before I curbed it. The first drain was the worst. The last flush was really not bad at all. The water that was in the block was distilled water I bought from the store. It is boxed and ready to ship. So I will have to un wrap it to take pictures of it. So please hang with me on it.
Have a great day,
Jared
Have a great day,
Jared
#6
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Have a great day,
Jared
#11
Less than a year. I will do my best to get pictures of it. It had some rust in it since I was running water water wetter, and a light mix of coolant. The car basically sat unused for most of that time. I actually flushed it a few times before I had her up and running before I curbed it. The first drain was the worst. The last flush was really not bad at all. The water that was in the block was distilled water I bought from the store. It is boxed and ready to ship. So I will have to un wrap it to take pictures of it. So please hang with me on it.
Have a great day,
Jared
Have a great day,
Jared
#13
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Thank you to all who have bought parts. Also If you would like to see pictures please send me your email or cell number so I can send you them. The cell would work better for me since I have not found my camera so I am useing my cell to take pictures.
Have a great day,
Jared
Have a great day,
Jared
#18
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Have a hreat day,
Jared
#20
Senior Member
Thread Starter
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
My intent with the konis was to have them customized at my work. I am having a them dynoed and the report will come with the shocks.
Have a great day,
Jared