LC1 with XD16 Gauge
 

I got this when I purchased my kit but I'm using an older gauge and sensor I had. Used but in good shape. $100 shipped OBO.

This is in fact not the XD16, it is a Red DB gauge. I'll post some more current photos tonight.

https://www.miataturbo.net/attachmen...ine=1366816131
https://www.miataturbo.net/attachmen...ine=1366816131

is that entire box of wires required to hook it up??? seems like a lot.

It's an old picture so no I don't think it needs "all" of that. But yes, the LC1 uses a separate controller with separate wiring than the gauge. So there is a fair bit of wiring. Everything required will be included of course.

hey alex, unless you bought an xd16 along the way, the one that came with it was a red db gauge. i didnt like the xd so i sold it and picked up the db

Nope, it is as you gave it to me. I'll change my post thanks.

Interested! You've been pm'd

PM Replied. One question asked was whether the LC1 was a pain to wire. I've read mixed reviews but I've priced it what I think is fair. If wired correctly they seem to work well.

Here are some recent photos. No instructions or anything included, what you see is what you get. I never had this hooked up but it seems to be in decent shape.

https://www.miataturbo.net/attachmen...ine=1367184366
https://www.miataturbo.net/attachmen...ine=1367184366
https://www.miataturbo.net/attachmen...ine=1367184366

If this can work with a standalone mspnp setup, I'm definitely interested.
I'll PM as well.

I think some of the wiring here was tied into some shared grounds and power for other gauges which is why it looks the way it does. I'll take better pictures of the colors but the LC1 has a wideband output for standalone and a narrowband output for gauge.

From the user guide: http://www.innovatemotorsports.com/s...C-1_Manual.pdf
"6. Optionally, the YELLOW (Analog out 1) and/or BROWN (Analog out 2) can be connected to the analog inputs of other devices such as data loggers, ECUs, or gauges. If either one or both of these wires are not being used isolate and tape the wire(s) out of the way. The default analog outputs are as follows: Analog output one is 1.1V = 14 AFR and .1V = 15 AFR. This is a simulated narrowband signal. Analog output two is setup as 0V = 7.35 AFR and 5V = 22.39"

$120 shipped?

Willing to ship to Toronto?

I'd rather not? I don't know how much that would be, I'll check.

Things not included with this: The software CD, The "serial program cable", Innovate Motor Sports On-Line Store

$100 shipped?

Still no Toronto shipping?