bobbiemartin

iTrader: (2)

My plan to rebuild our Miata has changed, so I have lots of parts for sale. No pics of these parts yet.

2002 short block incl block, rods, crank, main bear support & oil pan, internals look good, no ridge on cylinders $250
2002 VVT head, no cams $200
ARP head studs new in box $85.00
ARP main cap studs, used $50
ACT Streetlight steel lightweight flywheel (12 lbs) just had resurfaced $150.00
Mazdaspeed Miata pressure plate & disc, used, PP looks great, no marks or hot spots, disc is used, maybe 50% life left $125 for both
New in box 1.8L Miata clutch assembly, Exedy brand, pressure plate, disc, throw out bearing, release bearing and alignment tool. $85.00
EUDM 1.8 4-2-1 (try Y) exhaust manifold and downpipe with cat & bung for O2 sensor $325.00
MSM downpipe with cat $100
MSM exhaust center pipe with resonator $60.00
2002 intake cam $40.00
2002 exhaust cam $75.00
VVT intake cam gear $40.00

I'll ship at buyers expense. Probably will be adding more and I sort through the boxes. Email mini1275@bellsouth.net

scenturion

iTrader: (9)

damn youve got a lot of nice stuff. Does the exhaust header come with the heat shield? I need to worry about it passing smog out here
PM me pics of you have them!

bobbiemartin

iTrader: (2)

Yes heat shield incl. I'll try and get pics in the next couple of days.

bobbiemartin

iTrader: (2)

I found some pics of the EUDM 4-2-1 manifold and downpipe







Heat shield and EGR tube for manifold not shown but included

Landrew

iTrader: (2)

emailed & pm'd on ARP studs

EO2K

iTrader: (37)

Dammit, #2 for the EUDM exhaust bits. PayPal ready

scenturion

iTrader: (9)

mmm not sure if the VVT version youve got here will work with the 99-00 engine? It's really confusing to find info on this stuff.

EO2K

iTrader: (37)

In theory it should physically bolt up. Trying to use a VVT head with a stock 99/00 ECU is another story. The cam position sensors are the same but there is some question about phasing, etc. I've yet to find a real good description myself. If I get crazy, I'll give it a shot. I've got a VVT head in the garage atm

From what I've read, a MS2/3/DIYPNP ECU for a 99/00 should be fine but will have no VVT control (except for the MS3.) VVT would need to be controlled with a VVTuner from DIYAutotune (again, except for the MS3.)

Don't take my word for it though

scenturion

iTrader: (9)

I just mean the exhaust header- I know the 99 has the extra oxygen sensor, but the other style of EUDM 4-2-1 I've seen doesnt have a cat in the downpipe.

1FastMx5

iTrader: (4)

Will take arps
Top and bottom studs. PayPal now. Send info

1FastMx5

iTrader: (4)

Matter fact don't have to ship can drop off at GF job get cash in J ville?...works at local dealership there.

EO2K

iTrader: (37)

Ohh, gotcha. I still want it regardless Like I say, I've already got a VVT head so I want this guy.

bobbiemartin

iTrader: (2)

Sorry, have one in front of you.

bobbiemartin

iTrader: (2)

002 short block incl block, rods, crank, main bear support & oil pan, internals look good, no ridge on cylinders $250
2002 VVT head, no cams $200
ARP head studs new in box Sale pending
ARP main cap studs, Sale pending
ACT Streetlight steel lightweight flywheel (12 lbs) just had resurfaced $150.00
Mazdaspeed Miata pressure plate & disc, used, PP looks great, no marks or hot spots, disc is used, maybe 50% life left $125 for both
New in box 1.8L Miata clutch assembly, Exedy brand, pressure plate, disc, throw out bearing, release bearing and alignment tool. $85.00
EUDM 1.8 4-2-1 (try Y) exhaust manifold and downpipe with cat & bung for O2 sensor Sale pending
MSM downpipe with cat $100
MSM exhaust center pipe with resonator $60.00
2002 intake cam $40.00
2002 exhaust cam Sale pending
VVT intake cam gear $40.00

1FastMx5

iTrader: (4)

ok let me know ?

scenturion

iTrader: (9)

Go ahead, I'm not ready to take the plunge.

bobbiemartin

iTrader: (2)

MSM exhaust parts


ARP studs sold
2002 Exhaust cam sold

mikaelhgn

iTrader: (1)

Hey man can u check shipping weight on the block to 27616

bobbiemartin

iTrader: (2)

I really have no way to weigh it.

bobbiemartin

iTrader: (2)

Flywheel front


Flywheel back


MSM Pressure plate


MSM Pressure Plate


MSM Clutch Disc


Clutch Kit – This is a standard stock replacement clutch kit from Mazda, Exedy brand.