Lots of mods, hydra/injectors/wheels/interior stuff/gt3071/tialmvr
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 81
Total Cats: -1
From: Colorado Springs, Co
Lots of mods, hydra/injectors/wheels/interior stuff/gt3071/tialmvr
I bought everything new. and was building the miata, thanks to it getting totaled, i found a guy to buy the salvage for a good price. but now i have all the mods that ill be uninstalling tomorrow. i dont mind shipping, but im not going to pay for it lol. prices are +shipping. but most of the things fit in cheap flat rate boxes.
magnaflow Exhaust 587 new, say 300
im not going to take it off to take pics, so here it is on my bed last year! it is basically the same color other than the standard stainless steel bluing from the heat. I can post pics as soon as its off the car.
forge bpv 110 new 80 obo.
Begi Intake system, 369 new 200bucks,.
both of these you can see here.
prosport wide-band gauge, 200 new, 100
speedhut boost gauge matches stock gauges with mazdaspeed emblem. , 144 new. + single e-pod for the steering column was 50, so 100?
the "magic" 330cc injectors 80
FM new style. 02 mod 80.
15x8 949 6ul wheels 949 centercaps and all 8 valvestems. 636, + 480 225/45 hankook RS3s 3 months of use at most. was 1100 asking 600
voodoo piano black ebrake handle was 61, asking 45.
shift ****, 50 asking 35
apexi turbo timer, with PNP harness. 123 so 60.
TT and both voodoos can be seen here.
devils own stage 2 meth kit 375, asking 180
Hydra 2.7 $1970 asking 1700 w/ tune for, well almost all these mods. (not tuned for w/m) jeremy can send you a good base stock tune too.
id1000cc injectors, 500 new, 350. or 2k for both hydra+injectors I will get pics as soon as i get them out of the car this week.
evc6, 704, asking 550
Goodwin rotationally molded sub box @$269+ 4 JL audio 6W3 subs 129x4@$516 cost me 785 for the subs in august. asking 500 fits perfect with the rollbar.
halman ES mbc $40 ok nvm its not the rx. I forgot i sold the rx, ad got the models mixed up. It is the ES
*NIB gt3071 all the atp upgrades 1600 new asking 1300 hotside is .63 ar, t3 inlet, 3" vband out, compressor side has the polished housing, antisurge machining and 4"inlet, 2" outlet.
Abe currently has the hotside but ill have him send it this week.
NIB tial 44mm MVR all springs not just one like usuall. again abe has this but ill have him ship it back this week. say 350
May add a few things later.
May add a few things later. (NIB gt3071 all the atp upgrades tial 44mm MVR) gotta get them back from abe. but dont know what to ask for them.
gotta figure it all out.
magnaflow Exhaust 587 new, say 300
im not going to take it off to take pics, so here it is on my bed last year! it is basically the same color other than the standard stainless steel bluing from the heat. I can post pics as soon as its off the car.
forge bpv 110 new 80 obo.
Begi Intake system, 369 new 200bucks,.
both of these you can see here.
prosport wide-band gauge, 200 new, 100
speedhut boost gauge matches stock gauges with mazdaspeed emblem. , 144 new. + single e-pod for the steering column was 50, so 100?
the "magic" 330cc injectors 80
FM new style. 02 mod 80.
15x8 949 6ul wheels 949 centercaps and all 8 valvestems. 636, + 480 225/45 hankook RS3s 3 months of use at most. was 1100 asking 600
voodoo piano black ebrake handle was 61, asking 45.
shift ****, 50 asking 35
apexi turbo timer, with PNP harness. 123 so 60.
TT and both voodoos can be seen here.
devils own stage 2 meth kit 375, asking 180
Hydra 2.7 $1970 asking 1700 w/ tune for, well almost all these mods. (not tuned for w/m) jeremy can send you a good base stock tune too.
id1000cc injectors, 500 new, 350. or 2k for both hydra+injectors I will get pics as soon as i get them out of the car this week.
evc6, 704, asking 550
Goodwin rotationally molded sub box @$269+ 4 JL audio 6W3 subs 129x4@$516 cost me 785 for the subs in august. asking 500 fits perfect with the rollbar.
halman ES mbc $40 ok nvm its not the rx. I forgot i sold the rx, ad got the models mixed up. It is the ES
*NIB gt3071 all the atp upgrades 1600 new asking 1300 hotside is .63 ar, t3 inlet, 3" vband out, compressor side has the polished housing, antisurge machining and 4"inlet, 2" outlet.
Abe currently has the hotside but ill have him send it this week.
NIB tial 44mm MVR all springs not just one like usuall. again abe has this but ill have him ship it back this week. say 350
May add a few things later.
May add a few things later. (NIB gt3071 all the atp upgrades tial 44mm MVR) gotta get them back from abe. but dont know what to ask for them.
gotta figure it all out.
Last edited by Dange; Feb 25, 2013 at 08:32 PM.
Reply
0
0
If your willing to ship the 6ul wheels and tires I'll buy them. As long as they are in good condition and color is correct. What color? Pics? Condition? Any damage during accident?
Reply
0
0
Reply
0
0
Reply
0
0
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 81
Total Cats: -1
From: Colorado Springs, Co
wideband is this one. i didnt know it has one but seems that it does!.
Wideband Digital Air Fuel Ratio Gauge-Amber display
6uls, got like 5 immediate pms everywhere i posted this so they seem to be pending already. i guess i priced them way low. damn! lol.
no damage to anything other than the airbags really. lol. I just cut the airbags out and im currently driving it on the id1000s. but one person asked about the injectors for their ms3 build. but no offers have been made. ill let you know. if he was just curious or is serious.
also exhaust intake, and both voodoos potentially pending.
Wideband Digital Air Fuel Ratio Gauge-Amber display
6uls, got like 5 immediate pms everywhere i posted this so they seem to be pending already. i guess i priced them way low. damn! lol.
no damage to anything other than the airbags really. lol. I just cut the airbags out and im currently driving it on the id1000s. but one person asked about the injectors for their ms3 build. but no offers have been made. ill let you know. if he was just curious or is serious.
also exhaust intake, and both voodoos potentially pending.
Reply
-1
-1
Reply
0
0
id like to buy the 3071 and the tial waste gate if you can do $1500 flat. no need to ship the hotside back from abe, ill be having him make me a whole new exhaust side soon.
let me know!!
let me know!!
Reply
0
0
User: Dange
Last Activity: 03-01-2013 06:16 PM
He's no doubt seen the majority of our messages and PMs, maybe he has a FS thread on m.net or cr and decided to sell there instead?
Last Activity: 03-01-2013 06:16 PM
He's no doubt seen the majority of our messages and PMs, maybe he has a FS thread on m.net or cr and decided to sell there instead?
Reply
0
0
