LS1 fund raising garage cleaning
Thread Starter
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
LS1 fund raising garage cleaning
Enthuza 3.0" Dual Turbo Stainless with 3.00" test pipe. Has a minor dent in the passenger side tip but can't really be seen from above as it is on the bottom. This was used for 250 miles before going to a full open 3.00" exhaust.
$450 Picked up
Enthuza 1.8L 2.5" to 3.00" metal core cat. Enough flange to easily bore to 2.75". New and never used
$150 Shipped
(2) M-tuned FPR units that we didn't end up using because we stayed with the stock FPR. Each come with everything as pictured but the 5/16 fitting on the bottom. These can be bought through summit racing. I would some new o rings for the fittings too as these have been sitting for a year. As shipped these are $200+shipping each new.
$125 Shipped each 1 SOLD
Moss Low Pro Kit. Bought it new a year ago and have never gotten around to installing them. The kit is complete and is already assembled for you. Still has install instructions.
SOLD
BSP Low Pro Headlight Kit complete. I have had this on my car for the past couple years with no complaints. Light output isn't the best but I don't do a lot of night driving and when I do, it is in well lit areas. The brackets have some red spots on them from when my car was repainted, but they could be sanded and resprayed easily.
SOLD
Mazda Comp Motor mounts. Like new with only 250 miles on them. I switched over to a solid mounts when it switched to a dedicated track car.
SOLD
10.3 LB FM Flywheel. Again, used for only 250 miles. No discoloration.
SOLD
BEGi front scooper for r package front bumper. Scooper only and no mounting bolts, which can be had for cheap at lowes or home depot.
$75 picked up
Electronic Boost Controller for Megasquirt or Link/Hydra
$40 shipped
FM extractor hood: New and never installed. Not in production anymore.
$400 picked up
$450 Picked up
Enthuza 1.8L 2.5" to 3.00" metal core cat. Enough flange to easily bore to 2.75". New and never used
$150 Shipped
(2) M-tuned FPR units that we didn't end up using because we stayed with the stock FPR. Each come with everything as pictured but the 5/16 fitting on the bottom. These can be bought through summit racing. I would some new o rings for the fittings too as these have been sitting for a year. As shipped these are $200+shipping each new.
$125 Shipped each 1 SOLD
Moss Low Pro Kit. Bought it new a year ago and have never gotten around to installing them. The kit is complete and is already assembled for you. Still has install instructions.
SOLD
BSP Low Pro Headlight Kit complete. I have had this on my car for the past couple years with no complaints. Light output isn't the best but I don't do a lot of night driving and when I do, it is in well lit areas. The brackets have some red spots on them from when my car was repainted, but they could be sanded and resprayed easily.
SOLD
Mazda Comp Motor mounts. Like new with only 250 miles on them. I switched over to a solid mounts when it switched to a dedicated track car.
SOLD
10.3 LB FM Flywheel. Again, used for only 250 miles. No discoloration.
SOLD
BEGi front scooper for r package front bumper. Scooper only and no mounting bolts, which can be had for cheap at lowes or home depot.
$75 picked up
Electronic Boost Controller for Megasquirt or Link/Hydra
$40 shipped
FM extractor hood: New and never installed. Not in production anymore.
$400 picked up
Last edited by rharris19; Jan 19, 2010 at 06:48 PM.
Reply
0
0
Thread Starter
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
No problem. I think I can handle that.
Reply
0
0
Reply
0
0
Thread Starter
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
Deal! Thanks man. I owe you one.
Yeah it's for a 1.8. Mototr build might be a little more important, so somehow I can understand that. 
Reply
0
0
