Manifold and dp set
#1
Manifold and dp set
Sup dudes, I have small offer going on on the T25manifold and downpipe kits
T25 cast manifold, cast elbow and 2.5" downpipe to cat OR 3" open type downpipe. Please note the cast elbow is 2.5" vband then reducer to 3"
4 x stainless steel studs and 4 copper nuts
TIG welded 304l SS everything except the flexible joint, on the 3" its stainless steel
$730 shipped
It will take up to 4 weeks to dispatch, however I have already bought a lot of the stuff that i need to make them so more or less waiting for the manifolds to arrive, there are 5 x 1.6s and 5 x 1.8s manifolds available only
I can also make the lines and fittings, they are 70usd for 1.8s with 3 port fitting or 60usd for 1.6s NAs, if possible please dont order the lines and fittings, really dislike staying on top of them
If you want to go ahead, my paypal is krakn08@gmail.com, in the seller notes please list what you want to order
Available are the following
NA 1.8 and 1.6
NB 1.8 and 1.6
NBFL 1.8 {not 100% sure on the 1.6 NBFL but have one being fitted soon)
EFR 1.6 and 1.8
Some Photos
3" Manifold and DP set
2.5" Manifold, downpipe to cat and lines and fittings
Paypal order should look something like this
1.8 T25 NA 2.5" DP KIT ONLY
1.6 EFR NB DP KIT ONLY
LINES AND FITTINGS
1.6 T25 NB 3" DP KIT ONLY
LINES AND FiTTINGS
Also have a 1.6 NA efr setup that i made in error, currently header-less also 2 weeks wait
STC Muffler but can add 2 more vband sets for future upgrades
$1100 shipped
each extra vband set is 25 usd, vbands are decent and quick release
This is the setup I have, you will be buying exactly what is in the photos
As always you can reach me on facebook or by email krakn08@gmail.com
T25 cast manifold, cast elbow and 2.5" downpipe to cat OR 3" open type downpipe. Please note the cast elbow is 2.5" vband then reducer to 3"
4 x stainless steel studs and 4 copper nuts
TIG welded 304l SS everything except the flexible joint, on the 3" its stainless steel
$730 shipped
It will take up to 4 weeks to dispatch, however I have already bought a lot of the stuff that i need to make them so more or less waiting for the manifolds to arrive, there are 5 x 1.6s and 5 x 1.8s manifolds available only
I can also make the lines and fittings, they are 70usd for 1.8s with 3 port fitting or 60usd for 1.6s NAs, if possible please dont order the lines and fittings, really dislike staying on top of them
If you want to go ahead, my paypal is krakn08@gmail.com, in the seller notes please list what you want to order
Available are the following
NA 1.8 and 1.6
NB 1.8 and 1.6
NBFL 1.8 {not 100% sure on the 1.6 NBFL but have one being fitted soon)
EFR 1.6 and 1.8
Some Photos
3" Manifold and DP set
2.5" Manifold, downpipe to cat and lines and fittings
Paypal order should look something like this
1.8 T25 NA 2.5" DP KIT ONLY
1.6 EFR NB DP KIT ONLY
LINES AND FITTINGS
1.6 T25 NB 3" DP KIT ONLY
LINES AND FiTTINGS
Also have a 1.6 NA efr setup that i made in error, currently header-less also 2 weeks wait
STC Muffler but can add 2 more vband sets for future upgrades
$1100 shipped
each extra vband set is 25 usd, vbands are decent and quick release
This is the setup I have, you will be buying exactly what is in the photos
As always you can reach me on facebook or by email krakn08@gmail.com
Last edited by Kraken; 04-18-2018 at 07:06 PM.
#9
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
I think he's also been offering some magnaflow mufflers on his exhausts. I opted to go with the stocker and have it swapped over here should I feel the need.
Car should be running soon-ish (hopefully) so I'll have some info on things as well.
One thing to note is to use small nuts on the elbow. I had to grind part of the elbow to get the nut to sit flat since its curved. I ended up using a couple of washers to help distribute the load a bit better. He said that grinding was totally find because there's a ton of material there, but I just wanted to err on the side of caution. I'll probably find a smaller bolt soon.
I'll report back once the exhaust is on and I've installed and run things, but honestly the manifold looks very well made and the elbow is super nice as well. I have no complaints right now.
Car should be running soon-ish (hopefully) so I'll have some info on things as well.
One thing to note is to use small nuts on the elbow. I had to grind part of the elbow to get the nut to sit flat since its curved. I ended up using a couple of washers to help distribute the load a bit better. He said that grinding was totally find because there's a ton of material there, but I just wanted to err on the side of caution. I'll probably find a smaller bolt soon.
I'll report back once the exhaust is on and I've installed and run things, but honestly the manifold looks very well made and the elbow is super nice as well. I have no complaints right now.
#10
Elite Member
iTrader: (1)
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,552
Total Cats: 196
I think he's also been offering some magnaflow mufflers on his exhausts. I opted to go with the stocker and have it swapped over here should I feel the need.
Car should be running soon-ish (hopefully) so I'll have some info on things as well.
One thing to note is to use small nuts on the elbow. I had to grind part of the elbow to get the nut to sit flat since its curved. I ended up using a couple of washers to help distribute the load a bit better. He said that grinding was totally find because there's a ton of material there, but I just wanted to err on the side of caution. I'll probably find a smaller bolt soon.
I'll report back once the exhaust is on and I've installed and run things, but honestly the manifold looks very well made and the elbow is super nice as well. I have no complaints right now.
Car should be running soon-ish (hopefully) so I'll have some info on things as well.
One thing to note is to use small nuts on the elbow. I had to grind part of the elbow to get the nut to sit flat since its curved. I ended up using a couple of washers to help distribute the load a bit better. He said that grinding was totally find because there's a ton of material there, but I just wanted to err on the side of caution. I'll probably find a smaller bolt soon.
I'll report back once the exhaust is on and I've installed and run things, but honestly the manifold looks very well made and the elbow is super nice as well. I have no complaints right now.
anxiously waiting for my kraken efr setup.
in other news, EFR turbos are sold out in the whole freken country. and i already sold and shipped my turbo setup, so looks like ill be NA for a month or two...
#11
I have the kit and while i'm not completely running yet (need to plumb in ebc and tune), i'm more happy with the kit than not. A few things I wish I could've changed. M8 studs instead of M10 on the exhaust manifold. I didn't know he gave M8 as an option. Also, bolting the downpipe onto the turbo was also a pain in the butt requiring somebody rocking it back and forth so I can get the nuts on the studs.
I didn't use his oil line and fittings as they were angled wrong for my situation but they are high quality.
I didn't use his oil line and fittings as they were angled wrong for my situation but they are high quality.
#12
I have managed to get a few of the issues sorted, like the studs on the dp side, which I will be providing very soon, well I can provide them now just need to charge extra for them :(
Calvin, do you have the cast elbow or the old welded type ? Realistically stuff can be done better but having to rock it so you can tighten is quite normal on a lot of stuff, if it was easy everyone would be doing it
Seriously I am sort of giving them away at 730 usd, I cant believe only sold one.... anyway once this batch will be done I will really need to ask normal prices, which at the moment is £630 for the dp kit shipped. Well actually its less than that without the VAT(TAX) but then shipping to USA is a lot more than to Europe, so that 20% tax saving will go towards the shipping
Michael
Calvin, do you have the cast elbow or the old welded type ? Realistically stuff can be done better but having to rock it so you can tighten is quite normal on a lot of stuff, if it was easy everyone would be doing it
Seriously I am sort of giving them away at 730 usd, I cant believe only sold one.... anyway once this batch will be done I will really need to ask normal prices, which at the moment is £630 for the dp kit shipped. Well actually its less than that without the VAT(TAX) but then shipping to USA is a lot more than to Europe, so that 20% tax saving will go towards the shipping
Michael
#13
Sup dudes, I have small offer going on on the T25manifold and downpipe kits
T25 cast manifold, cast elbow and 2.5" downpipe to cat OR 3" open type downpipe. Please note the cast elbow is 2.5" vband then reducer to 3"
4 x stainless steel studs and 4 copper nuts
TIG welded 304l SS everything except the flexible joint, on the 3" its stainless steel
$730 shipped
It will take up to 4 weeks to dispatch, however I have already bought a lot of the stuff that i need to make them so more or less waiting for the manifolds to arrive, there are 5 x 1.6s and 5 x 1.8s manifolds available only
I can also make the lines and fittings, they are 70usd for 1.8s with 3 port fitting or 60usd for 1.6s NAs, if possible please dont order the lines and fittings, really dislike staying on top of them
If you want to go ahead, my paypal is krakn08@gmail.com, in the seller notes please list what you want to order
Available are the following
NA 1.8 and 1.6
NB 1.8 and 1.6
NBFL 1.8 {not 100% sure on the 1.6 NBFL but have one being fitted soon)
EFR 1.6 and 1.8
Some Photos
3" Manifold and DP set
2.5" Manifold, downpipe to cat and lines and fittings
Paypal order should look something like this
1.8 T25 NA 2.5" DP KIT ONLY
1.6 EFR NB DP KIT ONLY
LINES AND FITTINGS
1.6 T25 NB 3" DP KIT ONLY
LINES AND FiTTINGS
Also have a 1.6 NA efr setup that i made in error, currently header-less also 2 weeks wait
STC Muffler but can add 2 more vband sets for future upgrades
$1100 shipped
each extra vband set is 25 usd, vbands are decent and quick release
This is the setup I have, you will be buying exactly what is in the photos
As always you can reach me on facebook or by email krakn08@gmail.com
T25 cast manifold, cast elbow and 2.5" downpipe to cat OR 3" open type downpipe. Please note the cast elbow is 2.5" vband then reducer to 3"
4 x stainless steel studs and 4 copper nuts
TIG welded 304l SS everything except the flexible joint, on the 3" its stainless steel
$730 shipped
It will take up to 4 weeks to dispatch, however I have already bought a lot of the stuff that i need to make them so more or less waiting for the manifolds to arrive, there are 5 x 1.6s and 5 x 1.8s manifolds available only
I can also make the lines and fittings, they are 70usd for 1.8s with 3 port fitting or 60usd for 1.6s NAs, if possible please dont order the lines and fittings, really dislike staying on top of them
If you want to go ahead, my paypal is krakn08@gmail.com, in the seller notes please list what you want to order
Available are the following
NA 1.8 and 1.6
NB 1.8 and 1.6
NBFL 1.8 {not 100% sure on the 1.6 NBFL but have one being fitted soon)
EFR 1.6 and 1.8
Some Photos
3" Manifold and DP set
2.5" Manifold, downpipe to cat and lines and fittings
Paypal order should look something like this
1.8 T25 NA 2.5" DP KIT ONLY
1.6 EFR NB DP KIT ONLY
LINES AND FITTINGS
1.6 T25 NB 3" DP KIT ONLY
LINES AND FiTTINGS
Also have a 1.6 NA efr setup that i made in error, currently header-less also 2 weeks wait
STC Muffler but can add 2 more vband sets for future upgrades
$1100 shipped
each extra vband set is 25 usd, vbands are decent and quick release
This is the setup I have, you will be buying exactly what is in the photos
As always you can reach me on facebook or by email krakn08@gmail.com
#16
Elite Member
iTrader: (1)
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,552
Total Cats: 196
That is what you asked.
What i think you wanted to ask is, for example;
" Do you still have a 1.8 T25 manifold/dp setup IN STOCK" ?
"are you still selling these"? implies that he might no longer be selling them or out of business.
#17
I am saying that yes, he is in business and yes he is still selling these.
That is what you asked.
What i think you wanted to ask is, for example;
" Do you still have a 1.8 T25 manifold/dp setup IN STOCK" ?
"are you still selling these"? implies that he might no longer be selling them or out of business.
That is what you asked.
What i think you wanted to ask is, for example;
" Do you still have a 1.8 T25 manifold/dp setup IN STOCK" ?
"are you still selling these"? implies that he might no longer be selling them or out of business.