Okay, absolutely everything is out of the car and I'm going to be posting the carcass on Craigslist tonight. If there's misc interior stuff you're interested in (dash parts, carpets, plastic trim, etc.) let me know and I'll dig it out of the pile.

 

Okay chassis posted if anyone's vaguely interested: 1991 Mazda Miata Bare Chassis

Spent a ton of time this afternoon digging through the parts piles, organizing parts, taking pictures, and grouping them into baggies for easier shipping. So, there's a bunch of updated prices, notes, and I've noted where pics are available (all pics posted at Index of /pics/miata/partout). Again, feel free to ask for pics on anything. I'll eventually get pics of everything vaguely important up, but I'm just slowly going through everything I've pulled off the car and updating the lists as I go.

 

Would you say that momo wheel would be acceptable for a daily driven wheel? iv'e been looking for something to replace my wheel.

 

I actually like the wheel a lot. It's too big to go in the Elise or I'd use it there. Only real downside is no button for a horn, but if you don't care about that sort of thing then it'd be awesome.

 

Well I don't have horn right now anyway haha. I'm sure you could wire it for a horn though, no?

 

I'm sure you could do something -- probably get a horn button for the center bit or something. I had a wire with an insulated end on it in the center of the wheel. If I needed to hit the horn I'd reach in, grab the wire, and ground it against the wheel. Meep.

 

ahhhh I'm so tempted. I was saving up for a personal grinta/nrg quick release but had a few maintenence things get in the way.

 

For the horn - Momo Horn Button | eBay

 

Adding a quick post with text to match searches (since the main list is a pic).

Exterior
1991 Miata Shell
Axis Power Racing CF Hood + custom mounts + 4 locking pins
Axis Power Racing CF Hardtop + Hardtop Brackets + Seals + Lexan Window
Axis Power Racing CF Fenders
Custom Fixed Headlight conversion -- 1.2 lbs total
Custom Splitter
NA Stock Front Bumper Cover
Ciro Designs Custom Rear Wing + Endplates + Mounts

Wheels/Tires
Set of Toyo R1-R 245/35/17, 80% Tread
Rota Torque 17x8 Wheels
15x9 6ULs
225/45/15 Hoosier Wet H20s, a couple very wet events on them
15x10 6ULs
Set of 275/35/15 Hoosier A6s, 20 runs
Set of 275/35/15 Goodyear Eagle RS AX, 60 runs

Suspension
Fatcat double adjustable shocks, 800 or 700F/450 or 550R Springs
NB Control Arms + Delrin Bushings + V8Roadster Ball Joints
R Pkg Tie Rod Ends
V8Roadster Tie Rod Ends (pair)
NB Steering Rack w/Poly Bushings
NB Power Steering Pump/Reservoir/Lines
NB Front Subframe
Rear Subframe
Racing Beat Solid 1.6 FSB
949 Endlinks
EPMiata Rear UCAs
Stock 1.6 Rear Swaybar + bushings + brackets
Blueprinted Front Hubs w/long studs, no ABS rings, brand new unused
Blueprinted Front Hubs w/long studs, ABS rings, used 3 events
Front NB Upright Pair
Rear NB Upright Pair, bearings used for only 3 events, long studs
Diff Mount Bushings (Energy Suspension)
Rear Upper Upright Delrin Bushings

Brakes
Flyin Miata Front Little Big Brake Kit
Front Wilwood Carbotech AX6 pads (for the LBBK)
Front Wilwood E Compound Pads (for the LBBK)
Carbotech AX6 Rear Pads (1.6 brakes)
Stock Rotor Pairs
NA Master Cylinder
929 1" ABS Master Cylinder
Wilwood Miata Brake Prop Valve kit from FM
Dual-Diaphragm Booster

Motor/SC
Built 1.8 Motor (9:1 Wiseco Pistons, 949 Rods, Supertech top end, Balanced)
Lysholm 1600AX Supercharger w/Direct Drive Snout + Pulley
Custom BEGi Supercharger Manifold, Heavily Modified, w/Tensioner
ATI Damper + SC Pulley + Belt Guard + 36-2 Timing Wheel
BEGi Cooling Reroute
MiataCage Oil Pressure Gauge Adapter Tee + Plug
NB Knock Sensor
NB Starter
NA Oil Pressure Sensor
Clutch Slave + SS Clutch Line

Intake/Exhaust
RB 99 Header, Ceramic Coated and Wrapped
Custom 3" Exhaust w/Bolton extra resonator for <90db Sites
Custom NA6 stock cat + muffler welded to NB downpipe flange
Custom Supercharger Intake
Custom Supercharger Throttle Body Adapter
Mustang 75mm Throttle Body + IAC
Intercooler - RX7, Modified
Radiator - Civic 3row, Modified

Ignition/Fuel
Trackspeed COP Bracket
Toyota OEM 1ZZ Coils x4 (not ebay chinese)
Wiring Harness for Coils
1 ebay 1ZZ Coil
FM Big Flex Fuel Kit for 90-93 with NB head
Injector Dynamics 1000cc Injectors w/PnP adapters
Zeitronix Zt-3 Wideband Kit

Drivetrain
Fidanza Flywheel
Spec Stage 3+ Clutch Kit
AWR Motor Mounts, 95 Duro (stiff)
1.8 Diff Carrier, 4.3 gears, OS Giken diff (fully assembled)

Electronics
Hydra Nemesis 2.7 + Wiring from FM
AIM Evo4/MyChron3 + Water Temp Sensor
EVO2 16 cell Battery (2.5 lbs)
EVO2 12 cell battery (1.8 lbs)
Custom battery holder for EVO2 16/12 cell batteries
04 MSM ABS Pump + ECU + Wiring

Interior
Axis Power Racing CF Seats (6 lbs each), Stock sliders Dr/Hardmount Pass
Manual Window Conversion
Momo Mod 78 Steering Wheel
Momo Miata Steering Hub Adapter
Momo Spacer
Lap Belts x2 + Bolts/Washers/Spacers
IOPort CM1-2 Camera Mount

 

Lot of great parts, lot of huge prices attached to them though. Subscribed and waiting. Gooooood. Good. *taps fingers together*

 

Don't wait too long, the expensive parts are disappearing quickly.

 

Would you sell a package of 2 15x9s and 2 15x10s 6ul? If so, how much will it be?

Thanks

 

Sorry, not at this point. Too many people interested in the sets separately.

 

How much shipped for 15x10s 6uls to 90066(bussiness address)

 

Looks like around 30$.

 

Any pics of the front splitter setup?

 

I'll take some tonight!

 

Pics of splitter here: Index of /pics/miata/partout/splitter

The matching bumper with zust fittings is available too if desired.

 

I would love to take that motor. Too bad I'm in Hawaii. -__-

 

Specs on the seats? Waist size, FIA, age, etc. mounting pictures for spoiler?

Please and thank you.