Megasquirt I PCB 3.0 setup for 1.6
 

This item is not for sale any longer until it can be properly checked and tested by a third party. Thanks for looking.


I finally figure out that my laptop was taking its time recognizing the usb/serial port and I get an email the same day from a friend with an AEM deal/sponsership that I cannot refuse. This unit was purchased from Kingof1337 late last year and has been in the car but not used. He setup the harness on my ecu and diyautotune assembled the box. It is ready for firmware and all those maps and such. Seems foolish for me to start that process now. Please let me know if you have any questions. The installation is very simple, but you will need an AIT sensor from diyautotune for $30 plus shipping. However, a serial cable is included but not pictured. I was told that a couple more mods need to be done but this is a duplicate setup of Kingof1337's setup.

I am asking $430 and you would need to send me your ecu. My ecu is from a car with 29k and is in excellent condition. I pay for priority shipping. Thanks to all of those who have put up with my simple questions.

http://i70.photobucket.com/albums/i1...y/DSC00801.jpg

http://i70.photobucket.com/albums/i1...y/DSC00798.jpg

Attachment 216904

Attachment 216905

http://i70.photobucket.com/albums/i1...y/DSC00803.jpg

Attachment 216906

Attachment 216907

Attachment 216908

Attachment 216909

Attachment 216910

so it was the laptop that was the issue not the MS?

The car wouldn't run with an "empty" MS, no figure. I got a firmware message when I opened megatune with it connected. Kingof1337 implied it would have a basemap but he didn't even make the MS box.

$430 is cheap.

from what i understood, the processor comes loaded with the software from DIY.......

mine was

My computer said there was a firmware mismatch when I tried to run megatune and that I needed to update it. I assumed it was because it wasn't loaded because it said the firmware was an empty set.

what version of MT were u runnin on your machine? migh thave been a differant one than was loaded on the board

V2.25

So the fact that the car wouldn't run is because there is no base map?

Or it could be a codebase mismatch. 2.25 ships with a specific codebase, if another one was loaded on the MS... they won't match and then won't play nice.

I'm having an issue similar with mine atm, haven't checked any further though.

The link i was given in regards to it..http://www.diyautotune.com/faq/troub...unications.htm

Either way, the stock ecu is wired up very well, and the Megasquirt unit is supported. All the rest of the fun can be the next owners. I don't want to take a huge loss but I am in a giving mood, considering the deal I am getting. Not that AEM is better, of course, but at least I can hit the ground running!

Steps to resolve the mismatch:

1) Check that your config is setup for the same software that is in the MS

2) Copy any .INIs pertaining to you code from the .zip you downloaded to your megatune/mtcfg.../ folder

3) restart MT.

If you don't know what version of code you have then you will need to use a boot jumper to load MSnS-E. If you have a previous version of MSnS-E installed the jumper isn't needed and you can just reflash to the most current version so you know what you are working with.

Have fun.

Damn this is probably the last PnP MS from kingofl337 there will ever be. Collector's item.
Thats a good price, I hope you're getting that AEM for free.

<--- considdering taking kingofl337's business :)

get your own running first. ;)

he can do it yess he can Ad Ad

Not free, but close.

Should I stay put at $450 with shipping included? (actual buyers are ineligible to answer this question.:nono: )

well since I'm not an actual buyer...and you ARE getting ready to get a sweet deal on an AEM...your more than welcome to go a little further south :)

Is it out of the car yet? b/c I'd really be curious to why its not loading since they did give some good suggestions.

I have thought the same thing, but I dont have the time with college. Logic gates and boolean algebra are all I think about :( Sad cuz I could use the money.

Anyway, bump!!!11oneone

Just buy this one and you'd be in business!

I do mine differently :)

OK, $430 including shipping. I need to stop at this point, though. Need food for the children, ya know.

Maybe everyone here who likes the MS setup already has one. Am I really not going to be able to sell this setup? Its such a fantastic deal compared to the FMU/bipes/o2/fuel pump route! Anyone want to buy it to re-sell it?

only if u were sellin 2 weeks ago,, i would have baught it

Yeah, I'm bummed about that.

get the base map fixed and I'll buy it.

ha that is why he is selling it, dude. nice try, if you ask adbradley he might mod it for a base tune for you and a small fee. think about it?

all you have to do to make this thing work is plug it into a computer and load firmware and a msq. rotaryjunky should at least actually run this on his car and take a datalog so buyers could be sure it actually works.

Agreed. The discount would have to heavier without further proof that what you guys think is wrong with it really is the only thing wrong. Too many unknowns as it stands.

Fair enough, who wants to get paid to do this for me? I'm not going to screw it up. Although diyautotune warranties against manufactured defects for a year and I know that I haven't screwed it up yet.

Oh yeah, price will increase accordingly.

And for what its worth, I won't leave anyone hanging. Thats not who I am.

Having it checked/setup by a third party is definitely the way to go.

sorry man i have enuff on my plate right now

Anyone else with the mad skilz?

This item is not for sale any longer until it can be properly checked.