Misc. parts for sale
Thread Starter
Elite Member
iTrader: (9)
Joined: Sep 2008
Posts: 5,609
Total Cats: 13
From: Michigan
Misc. parts for sale
I have some parts for sale that just came off my 95
-Complete A/C system (Compressor, evaporator, condensor, and hardlines) $200
-Power steeringp pump and reservoir $75
-Passanger side manual black mirror -$40
-Door panels $50
-14" steelies with tires $100
-Air bag (driver) $45
-Air box assembly and AFM $50
-Stock ECU $40
-Soft top frame $40
-My bitch *** 2860 that I could not clock $450
-Complete A/C system (Compressor, evaporator, condensor, and hardlines) $200
-Power steeringp pump and reservoir $75
-Passanger side manual black mirror -$40
-Door panels $50
-14" steelies with tires $100
-Air bag (driver) $45
-Air box assembly and AFM $50
-Stock ECU $40
-Soft top frame $40
-My bitch *** 2860 that I could not clock $450
Reply
0
0
Thread Starter
Elite Member
iTrader: (9)
Joined: Sep 2008
Posts: 5,609
Total Cats: 13
From: Michigan
2860 .64 a/r I bought it advertised to be used for 5k miles. There's no shaft play.
I was not able to remove the turbine housing. If you have a log, or any manifold, in which the drain and feed are 90* from the flange, then there's no problem.
I have a bottom mount manifold. I need the drain and feed to be paralled to the flange.
LMK
I was not able to remove the turbine housing. If you have a log, or any manifold, in which the drain and feed are 90* from the flange, then there's no problem.
I have a bottom mount manifold. I need the drain and feed to be paralled to the flange.
LMK
Reply
0
0
Oh yeah, meant to PM you about the Spud for sale.
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Reply
0
0
Thread Starter
Elite Member
iTrader: (9)
Joined: Sep 2008
Posts: 5,609
Total Cats: 13
From: Michigan
Oh yeah, meant to PM you about the Spud for sale.
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Let me check to make sure this will work on the 1.6L
EDIT:
'94 and up used a hot wire MAF, not AFM.
Luckily I have an AFM, and am pretty sure it will plug into the intake piping. So how much for the airbox and plastics, sans MAF(which you can sell on eGay)?
Reply
0
0
Reply
0
0
sent me a message on gmail with the link. I dont know how I had missed it in the past.
Reply
0
0
Bump, because I backed out on the turbo. Found out it was most likely a 2560. Which is still a good turbo, just wont work with V-Bands.
Last edited by shuiend; May 10, 2010 at 06:32 AM.
Reply
0
0
Reply
0
0
