MP62 hotside NB2 (maryland)
7 Attachment(s)
Up for sale is a lightly used BRP/SOT mp62 hotside. It has around 8.5k on it and is in great shape. I would like to attempt a local sale on this if possible. I will entertain shipping only if no local interest. Shipping would be on the buyer. I will also consider separating the intercooler from the rest only if the blower is sold first. I also have a pcpro available but I do recommend going standalone. Asking $2700.
https://www.miataturbo.net/attachmen...ine=1426548173 https://www.miataturbo.net/attachmen...ine=1426548173 https://www.miataturbo.net/attachmen...ine=1426548173 https://www.miataturbo.net/attachmen...ine=1426548173 I didn't include all the nuts and bolts in the pictures, but they are included as well. Pawsies not included. |
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1426548366
This is the 6 rib kit with auto tensioner. The pullies were both upgraded to FFS to prevent slippage. The DTB has a threaded bung welded on for adding a IAT sensor. |
Hello there!
So is this supercharger not from FFS? Because theirs is "Cold Side". I'm trying to find a kit that is CARB legal in California. Also must fit my 99 NB 1.8L. Regards, Mike |
1 Attachment(s)
[QUOTE=GhostProtocol;1215547]Hello there!
So is this supercharger not from FFS? Because theirs is "Cold Side". I'm trying to find a kit that is CARB legal in California. Also must fit my 99 NB 1.8L. Regards, Mike[/QUOTE Not an FFS kit so this would not carry the carb cert. It uses the same mp62 but mounted over the exhaust manifold/header. https://www.miataturbo.net/attachmen...ine=1426551862 |
Thuper bump!!
|
Obama approved mandatory daily bump
|
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1426949317
Rotor tips have some slight marks that are in the rotor coating only. Slight wear in the coating towards the ends. |
Pm me best price shipped. I'm located at 31324
Best price shipped?
|
Incoming PM.
Originally Posted by zleeperz
(Post 1219459)
Best price shipped?
|
Please send me best price with shipping, located in 19720-3494
|
Incoming PM.
Originally Posted by axmed518
(Post 1219644)
Please send me best price with shipping, located in 19720-3494
|
As far as I know, this kit will not work on a NA 1.6l. The intercooler should bolt up to a NB1 and NB2. The blower bracket will bolt up to an NA 1.8l and both NB1 and NB2.
I will not ship internationally. I thought i mentioned it in post 1 but missed it.....due to the radiator moving back for IC clearance, low profile fans will be needed to clear the front sway bar. |
Still trying to find a local deal on this. I know that a turbo site isn't the best place to sell a s/c but i have kitties!! Seriously though, if anyone wants to link this to CR, that would be great. I am not creating a user id and spamming my way for classified access.
|
Price reduced to $2,500 plus shipping and insurance. I am opening this up to shipment within the US.
|
Estimate for shipping to 75013?
|
Originally Posted by gsyk59
(Post 1224444)
Estimate for shipping to 75013?
|
Bump
|
Highly recommend this seller, instead of pushing for a sale, he helped me realize this was out of my budget based on what I would have needed.
|
Originally Posted by stratosteve
(Post 1219899)
As far as I know, this kit will not work on a NA 1.6l. The intercooler should bolt up to a NB1 and NB2. The blower bracket will bolt up to an NA 1.8l and both NB1 and NB2.
|
The intercooler itself is the same na/nb but the attaching brackets are different. There are options: fab a new bracket, source your own ic (track dog), run an air/water ic or water/meth injection, or get a smaller crank pulley and crossover pipe and run non ic. The blower brackets are the same na/nb 1.8.
Originally Posted by huesmann
(Post 1227039)
Any idea about NA 1.8?
|
Bump
|
Ugh, I would love to get this off of you, and I am local :( I have to wait for my other project to sell before I can boost the Miata, this would be the perfect kit for me.
Good luck with sale and free bump for ya :) |
You own a '95 correct? IC wont work on it without either a new bracket or modify the existing. I am not in a hurry to sell it, yet. You could come and check it put and leave a deposit?
Thanks for the bump.
Originally Posted by Downmented
(Post 1228834)
Ugh, I would love to get this off of you, and I am local :( I have to wait for my other project to sell before I can boost the Miata, this would be the perfect kit for me.
Good luck with sale and free bump for ya :) |
pm'd
|
Bump for this seller! Awesome and honest guy and not only told me that this kit will not take me to my goals, but even made recommendations to what would! Absolutely awesome to deal with! :)
|
That intercooler is a thing of beauty, but sadly won't work on my 95', so I'll ask for you to pm me a price for the blower without the intercooler. I've had several blowers, ubercharger, m45 MP62 and even a FFS, but feel an old fashioned 6psi MP62 hot side is all I'm really wanting for me current project. My zip is 30317.
|
Pm'd.
Originally Posted by oldgrayfrog
(Post 1232050)
That intercooler is a thing of beauty, but sadly won't work on my 95', so I'll ask for you to pm me a price for the blower without the intercooler. I've had several blowers, ubercharger, m45 MP62 and even a FFS, but feel an old fashioned 6psi MP62 hot side is all I'm really wanting for me current project. My zip is 30317.
|
Bump
|
Is this still available? Local and interested.
|
I sent you a PM.
Originally Posted by zazzy
(Post 1237532)
Is this still available? Local and interested.
|
All times are GMT -4. The time now is 07:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands