MS1 PCB V3.0, Megastim V2.21, Hardtop, Rollbar, SS Clutch Line
#1
Hardtop, Rollbar, 1.8L Throttle body w/ TPS & IAC Valve, Koyo Radiator Cap
I ended up buying a MSPNP and have a few DIY MS things for sale. I purchased this MS as a MS n00b and as a 'standalone' unit. Turned out it was a fully built MS piggy-backed unit to a 94-95 factory computer. I did a little work to make an attempt at making it standalone, but gave up when I got hung up on getting the fan and idle control to work...and just bought a MSPNP for my needs.
The nitty-gritty:
The Megasquirt worked perfectly (and still tests perfect) for spark and fuel output when I used it in parallel with the factory computer. It is outfitted with boost control (I never used it since I'm supercharged). I was never able to get the thing to work standalone with fan and idle controls. This unit really needs someone experienced to confirm all the circuits are correct and current to the current MS knowledge. I'm pricing it with the mindset that someone experienced may be able to fix it up and flip it OR someone who can use it in parallel or a custom project. It also needs a wire harness rebuilt for it.
MS1 PCB V3.0 - SOLD
A few pictures:
http://www.cardomain.com/ride/323094...ta-mx-5/page-6
Megastim V2.21 w/ power adapter - SOLD
The nitty-gritty:
The Megasquirt worked perfectly (and still tests perfect) for spark and fuel output when I used it in parallel with the factory computer. It is outfitted with boost control (I never used it since I'm supercharged). I was never able to get the thing to work standalone with fan and idle controls. This unit really needs someone experienced to confirm all the circuits are correct and current to the current MS knowledge. I'm pricing it with the mindset that someone experienced may be able to fix it up and flip it OR someone who can use it in parallel or a custom project. It also needs a wire harness rebuilt for it.
MS1 PCB V3.0 - SOLD
A few pictures:
http://www.cardomain.com/ride/323094...ta-mx-5/page-6
Megastim V2.21 w/ power adapter - SOLD
Last edited by Enginerd; 01-23-2011 at 09:24 PM. Reason: added items
#2
Adding more shtuff!
Braided Stainless Steel Clutch Line :: 90-94 - SOLD
Harddog Hardbar: SOLD
Koyo Radiator Cap & Drain Plug : $15 shipped
http://www.good-win-racing.com/Mazda...ml?id=j6iGp8XC
1.3kgf/com (127hpa)
1.8L Throttle Body , TPS , & Idle control valve : $125 shipped for all
Throttle body shows a bit of light through the plate. When mounted on the inlet to my MP62, it passed enough air to keep the idle at about 1000-1000rpm with the idle bypass fully closed. Selling all together, or make an offer if you want to split the parts.
Braided Stainless Steel Clutch Line :: 90-94 - SOLD
Harddog Hardbar: SOLD
Koyo Radiator Cap & Drain Plug : $15 shipped
http://www.good-win-racing.com/Mazda...ml?id=j6iGp8XC
1.3kgf/com (127hpa)
1.8L Throttle Body , TPS , & Idle control valve : $125 shipped for all
Throttle body shows a bit of light through the plate. When mounted on the inlet to my MP62, it passed enough air to keep the idle at about 1000-1000rpm with the idle bypass fully closed. Selling all together, or make an offer if you want to split the parts.
Last edited by Enginerd; 02-03-2011 at 09:07 PM.
#6
Delhole, your pms are full. Need payment today else Im going with the other buyer I have lined up.
Also, yes this is the 2 point harddog rollbar. I understand it uses the same front mounting points as the 4 points, but this one is not approved for most tracks. It's a great street or autocross bar.
Also, yes this is the 2 point harddog rollbar. I understand it uses the same front mounting points as the 4 points, but this one is not approved for most tracks. It's a great street or autocross bar.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
graexodus
Miata parts for sale/trade
5
10-26-2015 01:48 PM