NB1 TacoTaco SR20 setup partout
10-09-2017, 02:45 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2017
Location: "lol", MA
Posts: 384
Total Cats: 14
NB1 TacoTaco SR20 setup partout
Not available till 20 October.
Too many curveballs at once, so I have to get rid of stuff.
Pictures to follow this upcoming weekend, most of it is pretty self explanatory however.
Everything can be shipped for the right price. PM. if you want something shipped that only has the picked up price.
Will also trade everything, including red NB1 shell for a clean stock-ish NA8. Sub 160k miles.
PM FOR FASTEST RESPONSE
2.5 inch and 2 inch intercooler odds and ends, PM for what you want.
All of this stuff can be picked up in 01854.
2.5 inch in/out eBay intercooler, your standard 27 inch eBay intercooler. It is black, it has some minor scratches. It works well. Local pickup only: 30$.
2.5 eBay Type RS BOV, it has the GM AIT sensor installed in the same pipe. Sold as one unit: 40$ shipped.
1.8 eBay "Taco Taco" cast iron manifold. No cracks. Comes with aluminum heatshield. 100$ picked up.
SR20 T25 Garret Turbo. Rebuilt by PO, I haven't observed any oil coming out of the intake side. Comes with oil inlet/outlet lines/fittings. 200$ picked up, PM for shipping.
2.5 exhaust system, mild steel held together by flux core magic and vbands. From downpipe to "muffler", 250$ picked up.
Yellow bilsteins with FCM bumpstops, tophats, and tein s.tech springs, 400$ picked up.
FlowForce injectors w/adapter kit. 200$ shipped.
BP Performance Specialty COP kit. 200$ shipped.
Unused eBay rods with ARP2000 bolts. 210$ shipped.
NB1 head, 300$ picked up. Brand new valve stem seals installed. Comes with all sensors, and valve cover.
NB1 block, 200$ picked up. Rings are probably toast, comes with all attached sensors, and accessories. Oil pan has barb fitting installed.
NB1 block, 60$ picked up, comes with crank, NB1 pistons. Painted red
NB1 oil pan, 40$ picked up. Clean.
OBX 4.1 diff with poly bushings, 520$ picked up.
1.8 flywheel, 20$ picked up.
NB1 partial wiring harness (section that goes under the fuel rail) 30$ picked up.
SR20 Turbo with bent compressor wheel, 75$ picked up.
Pictures to follow this upcoming weekend, most of it is pretty self explanatory however.
Everything can be shipped for the right price. PM. if you want something shipped that only has the picked up price.
Will also trade everything, including red NB1 shell for a clean stock-ish NA8. Sub 160k miles.
PM FOR FASTEST RESPONSE
2.5 inch and 2 inch intercooler odds and ends, PM for what you want.
All of this stuff can be picked up in 01854.
2.5 inch in/out eBay intercooler, your standard 27 inch eBay intercooler. It is black, it has some minor scratches. It works well. Local pickup only: 30$.
2.5 eBay Type RS BOV, it has the GM AIT sensor installed in the same pipe. Sold as one unit: 40$ shipped.
1.8 eBay "Taco Taco" cast iron manifold. No cracks. Comes with aluminum heatshield. 100$ picked up.
SR20 T25 Garret Turbo. Rebuilt by PO, I haven't observed any oil coming out of the intake side. Comes with oil inlet/outlet lines/fittings. 200$ picked up, PM for shipping.
2.5 exhaust system, mild steel held together by flux core magic and vbands. From downpipe to "muffler", 250$ picked up.
Yellow bilsteins with FCM bumpstops, tophats, and tein s.tech springs, 400$ picked up.
FlowForce injectors w/adapter kit. 200$ shipped.
BP Performance Specialty COP kit. 200$ shipped.
Unused eBay rods with ARP2000 bolts. 210$ shipped.
NB1 head, 300$ picked up. Brand new valve stem seals installed. Comes with all sensors, and valve cover.
NB1 block, 200$ picked up. Rings are probably toast, comes with all attached sensors, and accessories. Oil pan has barb fitting installed.
NB1 block, 60$ picked up, comes with crank, NB1 pistons. Painted red
NB1 oil pan, 40$ picked up. Clean.
OBX 4.1 diff with poly bushings, 520$ picked up.
1.8 flywheel, 20$ picked up.
NB1 partial wiring harness (section that goes under the fuel rail) 30$ picked up.
SR20 Turbo with bent compressor wheel, 75$ picked up.
Last edited by ByteVenom; 10-09-2017 at 07:47 PM.
Reply
0
0
10-21-2017, 05:58 AM
#4
Newb
Join Date: Oct 2017
Posts: 18
Total Cats: -2
Sr20
im interested in the setup as a whole for the right price, just need turbo, manifold, maybe piping, no ic
Not available till 20 October.
Too many curveballs at once, so I have to get rid of stuff.
Pictures to follow this upcoming weekend, most of it is pretty self explanatory however.
Everything can be shipped for the right price. PM. if you want something shipped that only has the picked up price.
Will also trade everything, including red NB1 shell for a clean stock-ish NA8. Sub 160k miles.
PM FOR FASTEST RESPONSE
2.5 inch and 2 inch intercooler odds and ends, PM for what you want.
All of this stuff can be picked up in 01854.
2.5 inch in/out eBay intercooler, your standard 27 inch eBay intercooler. It is black, it has some minor scratches. It works well. Local pickup only: 30$.
2.5 eBay Type RS BOV, it has the GM AIT sensor installed in the same pipe. Sold as one unit: 40$ shipped.
1.8 eBay "Taco Taco" cast iron manifold. No cracks. Comes with aluminum heatshield. 100$ picked up.
SR20 T25 Garret Turbo. Rebuilt by PO, I haven't observed any oil coming out of the intake side. Comes with oil inlet/outlet lines/fittings. 200$ picked up, PM for shipping.
2.5 exhaust system, mild steel held together by flux core magic and vbands. From downpipe to "muffler", 250$ picked up.
Yellow bilsteins with FCM bumpstops, tophats, and tein s.tech springs, 400$ picked up.
FlowForce injectors w/adapter kit. 200$ shipped.
BP Performance Specialty COP kit. 200$ shipped.
Unused eBay rods with ARP2000 bolts. 210$ shipped.
NB1 head, 300$ picked up. Brand new valve stem seals installed. Comes with all sensors, and valve cover.
NB1 block, 200$ picked up. Rings are probably toast, comes with all attached sensors, and accessories. Oil pan has barb fitting installed.
NB1 block, 60$ picked up, comes with crank, NB1 pistons. Painted red
NB1 oil pan, 40$ picked up. Clean.
OBX 4.1 diff with poly bushings, 520$ picked up.
1.8 flywheel, 20$ picked up.
NB1 partial wiring harness (section that goes under the fuel rail) 30$ picked up.
SR20 Turbo with bent compressor wheel, 75$ picked up.
Pictures to follow this upcoming weekend, most of it is pretty self explanatory however.
Everything can be shipped for the right price. PM. if you want something shipped that only has the picked up price.
Will also trade everything, including red NB1 shell for a clean stock-ish NA8. Sub 160k miles.
PM FOR FASTEST RESPONSE
2.5 inch and 2 inch intercooler odds and ends, PM for what you want.
All of this stuff can be picked up in 01854.
2.5 inch in/out eBay intercooler, your standard 27 inch eBay intercooler. It is black, it has some minor scratches. It works well. Local pickup only: 30$.
2.5 eBay Type RS BOV, it has the GM AIT sensor installed in the same pipe. Sold as one unit: 40$ shipped.
1.8 eBay "Taco Taco" cast iron manifold. No cracks. Comes with aluminum heatshield. 100$ picked up.
SR20 T25 Garret Turbo. Rebuilt by PO, I haven't observed any oil coming out of the intake side. Comes with oil inlet/outlet lines/fittings. 200$ picked up, PM for shipping.
2.5 exhaust system, mild steel held together by flux core magic and vbands. From downpipe to "muffler", 250$ picked up.
Yellow bilsteins with FCM bumpstops, tophats, and tein s.tech springs, 400$ picked up.
FlowForce injectors w/adapter kit. 200$ shipped.
BP Performance Specialty COP kit. 200$ shipped.
Unused eBay rods with ARP2000 bolts. 210$ shipped.
NB1 head, 300$ picked up. Brand new valve stem seals installed. Comes with all sensors, and valve cover.
NB1 block, 200$ picked up. Rings are probably toast, comes with all attached sensors, and accessories. Oil pan has barb fitting installed.
NB1 block, 60$ picked up, comes with crank, NB1 pistons. Painted red
NB1 oil pan, 40$ picked up. Clean.
OBX 4.1 diff with poly bushings, 520$ picked up.
1.8 flywheel, 20$ picked up.
NB1 partial wiring harness (section that goes under the fuel rail) 30$ picked up.
SR20 Turbo with bent compressor wheel, 75$ picked up.
Reply
0
0
