used 99 head with 140k miles $750 shipped obo with cams and manifold
used 97 head with 80k miles $250 shipped with cams
NEW 95 head with valve job and new seals fresh from shop $475 with cams
1999 bare block with main caps $150 pluss shipping
1999 pistons on rods 9.5-1 compression $80 shipped
crank pullies and bosses several available $50 pully only $80 with boss & cog
1995 Torsen diff $550 / $750 with axles and driveshaft pluss shipping
1996 driveshaft $120 shipped
1996 axles 2 sets available $220 shipped per pair
1995 short block $300 (buy one of my heads too for a whole motor)
1997 5spd transmission with 120k miles $200
1995 5spd transmission possibly rebuilt $300 (bought it from a friend of a friend as a spare it is verry verry clean and i was told it was rebuilt cant confirm that)
stock 1.8 flywheels $40 shipped ea
XTD lightweight flywheel i believe its 13 pounds $65 shipped
96 fuel rail $25
96 intake manifold $40 (witout TB)
1.8 injectors $30 (4)
1.8 exhaust manifold $50 shipped
1.8 exhaust manifold with downpipe $90 shipped
1995 ECU $80 shipped
1990 ECU $80 shipped
1995 CAS $65 Shipped
1995 intake crossover tube with MAF and air box 2 available $70 shipped ea
1995 TB with vtps $60 shipped
1997 Valve cover $30 shipped
1.8 starters $40 shipped
IM FORGETTING PILES OF THINGS IF A MIATA HAS ONE I PROBABLY HAVE 3 JUST ASK.......AND THIS IS JUST SOME OF THE POWERTRAIN STUFF

 

wow, you are literally right down the road from me! LOL

 

Any chance you have a 94-97 alternator?

 

yes i have a few altnators $50 shipped

 

Got everything for a non-cruise to cruise swap?

 

I assume the XTD flywheel is for a 1.8 as well? If so i'm interested in it.

Do you have any 1.6L parts? I'm looking for one of the idle air control valves that goes on the bottom of the throttle body.

 

Do you have any NA front grill plastics that go from the nose to the under panel? Mine was destroyed by me.....

 

Interested in the 97 valve cover, pic? do you also gave a 94-97 gauge panel hood?

 

Any update on these parts? I'm very interested in the XTD flywheel.

 

Got a 1.6 Engine harness?

 

Looking for steering rack, dash board. Thanks.