|
Parting out complete 1999NB
PAYPAL ME AT PHOTOCLUBB@HOTMAIL.COM
this car was damaged while buttsexing in the mountains (not by me) I am parting it out for a friend... so far what is gone is the front bumper cover, headlights and top, driver side suspension components are ruined, and chassis and tub are tweaked, but everything else is in great condition, I'm holding off on pulling the motor and rear end, untill I get all the other tid bits off... ALL PRICES NEGOTIABLE I am 30 miles east of los angeles, ask me for a part, and Ill snap a picture, and post it up on here... shipping at buyers expense, prefer local pick up godspeed radiator SOLD doors with windows, power everything including door card $200 each 1.8 brake calipers and rotors (to upgrade fro 1.6 brakes, these are not the sport brakes) SOLD black carpet interior, complete $70 complete power steering unit 150 complete ac unit 150 complete center dash and consol (no cracks) 200 good working dash cluster SOLD instrument hood 80 hood sold passenger side fender 100 driver side fender 50 trunk lid 150 rear bumper cover 75 the car is in a dark blue color... everything needs to go on this car! this is a complete car, so whatever request you send me ill post it up on here with pictures edit: 5 zigen exhaust $375 (complete exhaust including cat 450) SOLD tranny 5 speed $200 (87k original miles) SOLD motor no accesories SOLD stock radiator 80 three good tein coilovers $400 shipped (for all 4 see below) (Tein Flexes, it turns out that the front driver side has a bent eye hole, and the rear driver side is demolished... into many many pieces.... but the two on the passenger side are good...) ALL PRICES NEGOTIABLE... I NEED TO PART THIS SHIT OUT FAST... NO REASONABLE OFFER WILL BE TURNED DOWN... I WILL ONLY CHARGE ACTUAL SHIPPING COSTS, WHICHEVER WAY YOU WANT ME TO SEND IT..... I HAVE LOTS OF LITTLE SHIT LEFT NOW... EVERYTHING NEEDS TO GO... |
Possibly want some engine stuff when you are ready :D
|
Originally Posted by FRT_Fun
(Post 422760)
Possibly want some engine stuff when you are ready :D
|
James, PM me with a price on the complete engine when you are ready to pull it.
|
the engine only has 87k miles on it...
basically ill pull the motor, when i have a serious buyer, i.e. a REFUNDABLE 20% down payment... if some shit happens and you can't afford it anymore or something goes terribly wrong, Ill refund the 20%.... if you end up buying the motor, you will owe me the remaining balance in cash, when you pick up the motor... i have a van, and can deliver the engine (within reason, if you cover the gas!) basically i want to know that you are serious before i put the work in... 900 for just the intact head and block, no valve cover, no cams cam shafts no pulleys, no accesories.. 1100 for the entire entact motor as i pull it out... including flywheel and clutch... (clearly it is the better deal to pick it up all intact) let me know who wants and who is serious! |
got the steering wheel airbag?
|
the car was crashed, so all the airbags are deployed... but i have a cherry condition wheel, (minus the airbag)
it is the nardi three spoke wheel, $40 |
there was damage to the driverside rear wheel, so i dunno the condition of the torsen until i pull it off, so i'm not pricing that yet... i.e. it is a 4.1 with 15k miles on it... seriously... the owner paid a pretty penny for it but right now the wheels aren't spinning, so i'm holding the pricing until i can pull it off and expect it..
the tranny is also in excellent condition, for $200 |
Originally Posted by longuyen88
(Post 422841)
got the steering wheel airbag?
let me get my hands on the wheel and Ill take a picture of it and post it up on here for you to check out.... |
correction:
1. just found out that the car is a 2000 not a 1999 2. god speed radiator is gone 3. front driver side fender has a coupla dents (easily pullable check photos) for everyone interested in the engine, i just pulled the car cover off to do a compression test, and the wheel was locked.... and i have no steering wheel to turn on the car, to show you guys the miles and or show you the compression test, as soon as i get the wheel from the owner, ill go ahead and perform the compression test etc... but here are some of the picts so you can see what is on the car... also the god speed radiator is gone... but the car does have a 5 zigen exhaust on it.... retails for 550, i will sell the whole exhaust including the cat for 450... http://i27.photobucket.com/albums/c1...f/DSC02344.jpg http://i27.photobucket.com/albums/c1...f/DSC02345.jpg http://i27.photobucket.com/albums/c1...f/DSC02346.jpg http://i27.photobucket.com/albums/c1...f/DSC02347.jpg http://i27.photobucket.com/albums/c1...f/DSC02347.jpg http://i27.photobucket.com/albums/c1...f/DSC02349.jpg http://i27.photobucket.com/albums/c1...f/DSC02350.jpg http://i27.photobucket.com/albums/c1...f/DSC02351.jpg http://i27.photobucket.com/albums/c1...f/DSC02352.jpg http://i27.photobucket.com/albums/c1...f/DSC02353.jpg http://i27.photobucket.com/albums/c1...f/DSC02354.jpg http://i27.photobucket.com/albums/c1...f/DSC02355.jpg http://i27.photobucket.com/albums/c1...f/DSC02356.jpg |
Unless I missed something, I don't think you have the 4.1 torsen in the rear. For 99/00 they offered the 4.3 with the 5 speed and the 3.9 for the special edition. I thought the 4.1 was only for auto cars??
|
nvm i fail top is gone already
|
On second thought, pass on the engine, just saw location. Looks like there is quite a bit of interest for it anyways.
|
Originally Posted by posidon42
(Post 422929)
Unless I missed something, I don't think you have the 4.1 torsen in the rear. For 99/00 they offered the 4.3 with the 5 speed and the 3.9 for the special edition. I thought the 4.1 was only for auto cars??
also the torsen that is in it, the 4.1 only has about 15k original miles on it, where as the car and engine have about 87k miles... -james |
Originally Posted by FRT_Fun
(Post 422962)
On second thought, pass on the engine, just saw location. Looks like there is quite a bit of interest for it anyways.
|
Where is the tub tweaked? I know someone who is doing an ITA/PTE build who might be interested.
|
the area of the trunk right behind the rear driver side wheel is crushed in... for that kind of build, this tub is perfect... assuming you don't need or want the chassis,
i can snap some photos for you in the specific areas, and ill post em up tomorrow... will they just want the tub or the whole car? the reason i ask is, the rear driver side wheel took most of the damage. Bent the rear subframe, the frame, and crushed in a bit of the trunk... the tub would be good for a race car... frame not so sure... -james |
how much for the shocks??
looks like tein to me... |
How much for the MAF shipped top 23455?
|
I want the turn-signal clock spring and the TPS pigtail (6" of wire). Hook it up, please.
|
Interested in the steering wheel, but can't see pics here at work.
Will check it out again, or PM me with pic of condition it would arrive in. Thanks. |
If gospeed81 passes on the steering wheel I might be interested.
|
picture of the steering wheel. Please :)
|
How much to ship the hood 33432
|
Originally Posted by james399
(Post 422984)
the area of the trunk right behind the rear driver side wheel is crushed in... for that kind of build, this tub is perfect... assuming you don't need or want the chassis,
i can snap some photos for you in the specific areas, and ill post em up tomorrow... will they just want the tub or the whole car? the reason i ask is, the rear driver side wheel took most of the damage. Bent the rear subframe, the frame, and crushed in a bit of the trunk... the tub would be good for a race car... frame not so sure... -james |
Originally Posted by Savington
(Post 422978)
Where is the tub tweaked? I know someone who is doing an ITA/PTE build who might be interested.
This photo is looking down from inside the trunk on the driver side http://i27.photobucket.com/albums/c1...f/DSC02357.jpg Another shot from inside the trunk showing the shock mount http://i27.photobucket.com/albums/c1...f/DSC02358.jpg Another shot showing the separation of the wheel well from inside the trunk http://i27.photobucket.com/albums/c1...f/DSC02359.jpg From outside http://i27.photobucket.com/albums/c1...f/DSC02360.jpg from outside http://i27.photobucket.com/albums/c1...f/DSC02361.jpg Thats it Savington, let me know if you are still interested in the tub or the chassis... |
Ouch. That's trashed. Thanks anyway.
|
Originally Posted by leatherface24
(Post 423149)
How much to ship the hood 33432
edit: sav doesn't want the car, how do you want me to send it to you, i prefer doing ups with insurance, and having them pack it... that way you are guaranteed to get it, or are covered by them, but they charge a pretty penny to pack and ship that shit... also i have never shipped a hood before and i have no idea how to package and or ship that... |
Originally Posted by greddymx5
(Post 422991)
how much for the shocks??
looks like tein to me... but i will send everything, i.e. the good ones and the bad ones.... but how is 600 shipped, shoot me an email at photoclubb@hotmail.com price is negotiable... |
Originally Posted by Big Boy
(Post 423107)
If gospeed81 passes on the steering wheel I might be interested.
Originally Posted by gospeed81
(Post 423065)
Interested in the steering wheel, but can't see pics here at work.
Will check it out again, or PM me with pic of condition it would arrive in. Thanks. someone before gospeed81 requested the wheel, i need to get it and take a photo of it... so once i do that ill go down the order i'm not going to price it until i see the condition of it... i dont' wanna over quote fucked up parts etc.... |
Originally Posted by Savington
(Post 423206)
Ouch. That's trashed. Thanks anyway.
|
Originally Posted by -gokart-
(Post 423011)
How much for the MAF shipped top 23455?
|
Originally Posted by hustler
(Post 423020)
I want the turn-signal clock spring and the TPS pigtail (6" of wire). Hook it up, please.
as for the tps pigtail, don't want to cut any of the wiring harness yet, i wanna sell it hole... |
prices are negotiable, no unreasonable offer will be refused... if i sent you a number and you didn't like it, send me a number in pm...
as long as it is reasonable, i'll take it... you can paypal me at photoclubb@hotmail.com |
How much for the timing wheel to 17961?
|
Originally Posted by thirdgen
(Post 423429)
How much for the timing wheel to 17961?
|
Can you get a good packing and shipping cost on the hood to 07470, if it isn't sold, please?
|
Originally Posted by leatherface24
(Post 423149)
How much to ship the hood 33432
Originally Posted by olderguy
(Post 423745)
Can you get a good packing and shipping cost on the hood to 07470, if it isn't sold, please?
but he who comes first with cash wins... so i will get the estimate to you guys so you guys can have first crack at it... olderguy, i too am concerned abou the packaging and shipping, and i will get an estimate with ups packaging it, so that i can get their pack and ship promise... the trade off is that it might be a bit pricey... but ill post up here and let you guys know by tomorrow... |
How much for complete Dash And Door Panels. ?
|
Originally Posted by turbotyla
(Post 424858)
How much for complete Dash And Door Panels. ?
also on the door cards, do you want the tweeter speakers? i was hoping to sell the doors complete as a whole... regardless pm me an offer shipped, to you zip and ill see if it is worth it... mind you shipping that shit will be expensive... -James |
i was wondering mostly on the dash and the gauge cluster so thanks anyways. good luck with the sale
|
Originally Posted by turbotyla
(Post 425032)
i was wondering mostly on the dash and the gauge cluster so thanks anyways. good luck with the sale
|
PM if you would sell the oil dip stick at a reasonable price.
Thanks |
Originally Posted by miatame
(Post 425317)
PM if you would sell the oil dip stick at a reasonable price.
Thanks |
Original post updated...
|
you better send that god-damn TPS pig-tail.
|
Originally Posted by hustler
(Post 425395)
you better send that god-damn TPS pig-tail.
|
ok, so i finally got the airbag and shit for the steering wheel from the owner...
here are some pictures of it... i'd give it an 9 out of 10... i took some close up shots where it was worn, but the airbag is mint... http://i27.photobucket.com/albums/c1...706090136b.jpg http://i27.photobucket.com/albums/c1...706090136b.jpg http://i27.photobucket.com/albums/c1...06090136-1.jpg the pictures make it look worse than it is... so in order of people who were interested... longuyen88 gospeed81 Big boy pitlab 77 lets say 240 shipped continental united states fully insured via ups... i checked on some rx7 sites, and they are selling for 300+ for mint ones... so let me know if anyone is interested, else i will go peddle it there... figured i'd give the miata's first shot... |
seriously no one want a nardi wheel? I know the price is steep, and the pictures make it look fucked up... but it is not that bad, and is not discolored... you can't see the worn marks unless you put that shit up to your face....
but as with all things in life... someone make me an offer |
| All times are GMT -4. The time now is 09:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands