Parting out Miata Nasty!!
 

you guys know my car..well some things happened so i gotta part it out
EVERYTHING MUST GO..
Engine
Tranny
Diff
Ati SuperDamper never used
Turbo Kit
Exhaust
i everything, ask me what you want and i'll sell it
pic of the car
Attachment 210246

I want the differential pumpkin. Ill send a pm

I might be interested in a few things, but I'm not looking back through 250 of your posts to find everything you've done to the car.

Let me know about:
Exhaust?
Brakes?
Intercooler size?
Tires/wheels?
Injectors?
Engine management?
Gauges?

I'll take the ATI damper, pm me a price and your paypal address.

What is your turbo setup?

ok give me some time to get everything together and i'll be sending each and everyone a pm

You may have better luck selling it all if you post the descriptions in your thread, along with prices, instead of copying and pasting the same PM 50 times.

interested in the head if you are willing to part it from the shortblock, price dependent of course.....

Let me know

If it's an ABS car I need some ABS components.

ok here's the whole list of parts..
Engine..
almost 1.9l
supertech 8.6.1 piston
supertech rods(aka eagle rods)
.5mm over bore
comp. 9.1.1
Standard size valve(black nitriged)
supertech springs with ti-retainers
miataroadster billet steel oilpump
engine can be part out if you want the head or the long block let me know, engine has about 2k miles on it
flyingmiata cam gear-100
Gates timing belt-50
ATI Superdamperavy never used 450 and i'll throw in the trigger wheel for free
6-speed tranny about 45k miles on it-550 negotiable
2003 stock sld about 45k miles on it-800 negotiable
act heavyduty 6puck sprung disc clutch about 15k miles on it 250 negotiable
drive shaft,axles, control arms all those things don't really have a price on them but just let me know if you want them
aeromotive fpr-60
turbo kit-3000, included custom made manifold,gt28 dualball bearing turbo just rebuild about 1k miles on it,2.5inch black intercooler pipin, all clamps and couplers, intercooler
22x9x2.5,hks sequential bov, greddy boost controller, greddy turbotimer, aem wideband with sensor, aem f/ic tuned, rx7-550 injectors, turbo downpipe elbow
2.75inch custom exhaust-250
walbro 255lph fuel pump-60
slotted drilled from rotors-60
na slotted drilled rear rotors-40
mazdaspeed competition engine mounts about 2k miles on it- 60
new stock bose 6cd changer with speakers sounds amazing-350 negotiable
everything else interior wise let me know all black leather interior
http://i212.photobucket.com/albums/c...dba992a_o1.jpg
Attachment 210242
Attachment 210243
Attachment 210244

heres a link to my photobucket so you guys can see everything
mxmiata - Photobucket - Video and Image Hosting
by the way all these parts does not included shipping and i tried to make them cheaper than what you can find on partsgroup.com

interested in the front shock tower brace, aeromotive fpr, and possibly your fuel rail.

Some of those pictures show some pretty hardcore piston carnage. Is the engine dead right now? Also, I see three different exhaust manifolds in your pictures. Which one are you selling? There is one that looks similar to the Begi S5 design that looks pretty cool. Hard to tell in the pics, but is the turbo tilted?

I'm gonna take a guess that you rolled the car?

the car did roll and theres is nothing wrong with the engine i turned it on this morning and i let it get hot nothing is wrong with it
all of that engine carnage thing got fixed at the machine shop

What model is the FPR? Is it adjustable? I just installed the walbro 255 yesterday and I would like to finish modifying the fuel system. Will buy tubing and connections as well. Need some more info on the fuel rail. Stock? Modified stock? Aftermarket?

yeah it is adjustable

I'll give you $150 shipped to 23455 for the cam-gear & motor mounts, or cam-gear & 550's... or $200 shipped for all 3. Paypal is standing by.

Also, I saw these on your Photobucket page... how much?
Attachment 210240

im still taking stuff apart i think i have some one that wants to buy the whole engine give me a couple of days let me get everthing taken apart as for the girl sorry she's sold...he he

FPR, gauge and fuel lines are mine. :) Just waiting to send payment.

yes there sold..to posidon42 just sent you a pm again check it out

fpr,line,guage sold to posidon42
ATI superdamper and trigger wheel sold to Jaymx5

im interested in the BOV and the exhaust. any pics?

yeah.... go to photobucket and type in mxmiata look through the pics
about the bov thats with the turbo kit sorry if it doesnt sell i'll let you know

ok I'll wait, but just for shit's and giggles.... what would you want for the longblock?

for the long block 4k but i'm negotiable

pm-d

i haven't received anything yet^^^^

Interested in injectors.

pm'd

YGPM about motor mounts

Interested in wideband. It's the AEM UEGO with gauge? Give me a price.

yeah it is i'm trying to sell it with the turbo kit

where are you located? I'm interested in rims? are they f/s?

that exhaust won't fin an NA, will it?

um yeah it will the thing about it is its one whole straight pipe so i would have to cut it to ship it but all you would have to do it just cut it shorter

Thank you.

Could you give me some more details on the exhaust; i.e. muffler used, etc?

Also, location?

Thank you very much.

If you haven't sold them, how much for brakes/brackets/rotors/SS lines?

hey i send you a pm

Ok letting engine and turbokit go for 7k come on people this thing is brand new you can't go wrong

still waiting on pm with shipped prices on everything we discussed:cool:

shit i'm sorry man can you send it again

payment for Items sent :)

ok got them thanks

update things that have been sold
Steering wheel
Center council
window switch
silvertrim around the shift boot and cdplayer
injectors
superdamper
frontbumper and wideband
pendin on
rotors calipers and brackets
exhaust
everything else is still up for sale

Post #18.
I want the cam-gear, motor mounts, and 550's.
I've got Paypal ready for ya.

cam gear stay on the engine motormounts sale pending and 550's are sold
still have everything else turbo kit boost guage controller all that crap
also engine going for 5500
come on people give me a deal i'm negotiable
if you can find me a honda s2000 or a shell i'll trade w.e.

Price for front bumper, lip, side skirts, rear mud guards? to 94122.

Dude, I posted twice the first day you had this thread up with offers on those... WTF?

front bumper+lip sold to me:)

Okay let me know if you dont want them anymore:mad:

Anyways if the rear mud guards and side skirts are still available, let me know the price.

yeah there still up for sale

so rotors are gone? or did you mean just the calipers and brackets?

Hey bro, your inbox is full so cant pm you. can I get tracking info for the items I bought? thanx

Any update on the shipping? Why do you need to wait for the money to transfer to your bank account?

Cheers

(sorry I'm new here but serious :)

So what will be with engine? I'm interested in valves and cam gear but from recent posts I see You are still balancing on selling engine in parts or not. SO PLEASE MAKE YOUR MIND ON THAT.

Thanks

still waiting on tracking info

Saw a couple of people asking where this stuff is located. Haven't seen any answer.

Interested in the 6 speed. Where are you located?

sold the wideband already? I think I need more help tuning my Hydra since it doesn't support an external gauge...

I bought the wideband:)
still waiting for tracking info though

Interested in the whole motor (including head).
Where are you located?

Who assembled it, what're the leakdown #'s, what's the safe revlimit?