Parting out my track car (hardtop/C3m/Recaro/SM/1.8 stuff)
#22
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
#23
Interested in the seat and harnesses. Im on mobile, where are you located? Also may be interested in the coilovers, what are the specs on them? Stock valving, #700/350? And I have not heard of the FCM voucher, if you inform me I may be interested in those too!
#24
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
Sorry man, updated the first post.
#26
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
Just to update everyone - the motor was making a really shitty noise when I pulled in into one of our bays to get the wheels off the car (hence why they've been pulled from the add.) The initial plan was to drive to a friends house to begin disassembly but obviously I don't want to do that with an engine issue so I'm trying to arrange having it trailered out there.
Sorry for the delay everyone.
Sorry for the delay everyone.
#27
What do you mean by shell? Like bare shell or will it still have body panels?
#28
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
#30
Check out ShipNex dot com for shipping rates on things like the trans. Just sent ~170lbs worth of wheels through FedEx from FL to WA in about a week for around 180.
GLWS! If we weren't buying a house very soon I would be taking some parts off your hands.
GLWS! If we weren't buying a house very soon I would be taking some parts off your hands.
#31
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
Thanks for the heads up!
#32
Hi there,
i'll be interested by your complete "cop kit" but it will work on a bpd engine ? (mazda familia gtr).
Cheers.
i'll be interested by your complete "cop kit" but it will work on a bpd engine ? (mazda familia gtr).
Cheers.
#33
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
Update: Car finally made it to my friends garage for disassembly earlier this week, unfortunately Thanksgiving and my son's 1st birthday party being this weekend really limited the time I could spend working on it.
However, 80% of the parts that are sold are off the car, I'm going to be nabbing boxes from work so that I can start getting everything packaged up and ready to ship - hopefully tracking numbers by mid next week.
Sold, sorry.
However, 80% of the parts that are sold are off the car, I'm going to be nabbing boxes from work so that I can start getting everything packaged up and ready to ship - hopefully tracking numbers by mid next week.
Sold, sorry.
#34
Could you post or PM me pictures of the oil cooler setup? Did you have an oil temp gauge to determine how much your temps were actually reduced?
#35
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
#36
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
Shell (Laguna blue, welded in 4pt rollbar, used to be a 6pt cage 14xxxxmi) $950.00
SOLD Hardtop (headliner+defroster) $850.00
6 speed (no grinds, never any issues) $650.00
SOLD Personal Neo Grinta suede 330mm (worn but not shitty)$100.00
SOLD 225/45/15 Rivals (1000 miles, MAYBE) $250.00
SOLDAribuilt airbox $200.00
SOLD Shaving Seconds custom header (matched primaries, etc..) $350.00
SOLD SM F RB sway bar + adj endlinks $150.00
SOLD Planet Miata sideskirts (Fiberglass, kinda beat... 15 footers) $50.00
SOLD Zeromotive rear canards $100.00
SOLD PNP Toyota COP setup (1.8) $200.00
94-95 MS2 DIY + cables (sq imj ready) $500.00
SOLD Aerocatch latches (pair) non-locking $50.00
Blacktop AE101 ITBs w/ TPS pigtail $250.00
Super interested in trading my MS for a 90-93 unit....
SOLD Hardtop (headliner+defroster) $850.00
6 speed (no grinds, never any issues) $650.00
SOLD Personal Neo Grinta suede 330mm (worn but not shitty)$100.00
SOLD 225/45/15 Rivals (1000 miles, MAYBE) $250.00
SOLDAribuilt airbox $200.00
SOLD Shaving Seconds custom header (matched primaries, etc..) $350.00
SOLD SM F RB sway bar + adj endlinks $150.00
SOLD Planet Miata sideskirts (Fiberglass, kinda beat... 15 footers) $50.00
SOLD Zeromotive rear canards $100.00
SOLD PNP Toyota COP setup (1.8) $200.00
94-95 MS2 DIY + cables (sq imj ready) $500.00
SOLD Aerocatch latches (pair) non-locking $50.00
Blacktop AE101 ITBs w/ TPS pigtail $250.00
Super interested in trading my MS for a 90-93 unit....
#38
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Las Cruces, NM
Posts: 592
Total Cats: 114
You pay me, I ship to you, you plug it in along with a few other basic MS setup steps, load a base map and drive.
It includes the the GM IAT sensor and the seq-inj box.
It includes the the GM IAT sensor and the seq-inj box.