All prices are OBO, no trades unless you have quality 17x8.5/9 wheels in 5x114.3.

Axis Power NA Carbon Miata Hood fits 90-97. Lightest Miata hood ever made to my knowledge, with HRP carbon vent, 4 aerocatch latches and Lexan headlight "lids" weighs in at 8 pounds. Currently painted sunburst yellow. Will include aerocatch mounting points, 2 bolt into the stock hood hinge area, 2 go into the core support. Sold



AWR Motor Mounts, softest durometer poly, good working order, 2 years old, designed for 01-05 block/pan, should also fit 94-2000 just won't utilize the last hole on the pan if I remember correctly. SOLD



Flyin Miata lightweight flywheel mated to an ACT XT clutch. All in good working order, maybe 1500 miles on the clutch itself, about 50 miles on the throw out bearing. Good to well over 300wheel horsepower. Organic full face disc makes it easy to modulate. SOLD



Limited slip differential from the 04-05 Mazdaspeed Miata, comes with stronger axles specific to the Mazdaspeed. Will include driveshaft as well for swapping into 1.6 car. Good working order, no leaks, has Garagestar Delrin differential bushings installed for crisper shifting response. Bolts into any 90-05 Miata. 4.10 rear end ratio. Looking for 1200+ shipping


MCS Double Adjustable Remote Dampers
These shocks have maybe 50-75 miles on them tops, cone with 60mm swift springs of 784/448 rates, and spherical bearing upper mounts. Everything was brand new when it was put together. I can change spring length, rate, brand for the buyer and change the collar size to match This is some of the best suspension money can buy for this platform. Mechanically flawless, one rear dampers has cosmetic blemishes on the body from the wrong size spring being used initially and the spring hopped when the car was loaded and scraped the upper shock body, I can certainly send it out and have it replaced if the buyer is interested but price will go up accordingly. Doesn't affect the adjustment unless you plan to run your Miata at monster Dakar ride heights. Shocks are present to settings that I liked for road course work, they will also ride better than stock even with the spring rates they have
Asking 3200 shipped OBO for the set. Will come with MCS collar adjustment tools.
New prices are
MCS remote doubles $4400
AMR spherical upper mounts $500
Swift springs $300






Used NB2 header in good shape. Comes with heatshield, no broken parts. Excellent upgrade for 99-00 cars . 150 shipped obo


KO racing 3 inch turboback exhaust designed for MSM turbo. Downpipes is a work of art, haven't seen anything else like it on the market. Custom built for my car. This was in an NA chassis with a full MSM swap front/rear subframes, engine, trans, and diff. Designed to be a center exit, has a small magna flow muffler. The down pipe/midpipe portion should fit any NA/NB with an MSM turbo setup, after that build a rear section of your choice and hook it up with the v band. Looking for 300 obo + shipping




Semi Built MSM Motor
Engine was in my NA so it has a few differences like no EGR and a different fuel rail. Engine has about 1500 miles on it with the following upgrades
Boundary Engineering Oil Pump
Coolant reroute with proper head gasket
ACL race bearings
Fresh OEM rings when rebuilt on stock Pistons
Manley forged rods
ARP main and head studs
FIC 775cc injectors
New coils
New OEM crank pulley sprocket and crank pulley.
In the last 50 miles the motor received the following
New head gasket, timing belt and water pump, spark plugs, cam seals, head was gone through and cleaned and surfaced. Compression is around 180 across the board.
Price negotiable depending on what is included.
Motor with no manifolds, mounts,oil cooler, or injectors and a stock oil cap. 2000 OBO
I can include things like the injectors, the rare Mazdaspeed oil cap, the ported OE MSM exhaust manifold with billet wheel upgraded turbo which badly needs a rebuild, skunk 2 intake manifold with skunk 2 tb , just pM me to discuss price. Oil cooler is not available.
Willing to split shipping 50/50







Koyo Hyper V Radiator for NA 90-97. Good working order, some dings here and there, comes with high pressure Koyo cap. SOLD




Garagestar Front Tow Hook. SOLD

 

Did I miss something? Why are you parting out?

 

Car caught on fire and burned down.

 

sent you a PM

 

Turbo had issues (described above). Because of the bigger compressor wheel and the stock sized wastegate port, it wouldn't run less than 18psi, which on this setup was ~315hp. Amazing fun, but we wanted to be able to run less power, but also loved the idea of 315hp. The higher horsepower would require forged pistons on the track, the lower hp would require a better turbo, therefore a new manifold, and therefore a new downpipe and exhaust. On top of that the new intercooler we bought was causing over heating issues. So with those costs in mind, Martin (OP) decided to switch over to a great deal on a friend's S2000. AC, power top, more power, etc etc.

 

Lol

 

PM'd about clutch.

 

Pm'd about awr mounts.

 

PM sent

 

PM'ed for radiator

 

PMS replied.
engine pending, tow hook sold.

 

PMed on hood.

 

Hood is sold. Tow hook is sold.

 

Engine sold!

 

Does anyone want the clutch? Cause I want that flywheel!

 

I've been contemplating the clutch; been reading around trying to convince myself of its street-ability...

 

Clutch and flywheel and radiator are all pending together, if it falls through you guys PM me.
Also have some 775 cc FIC injectors up for grabs, direct drop into the Miata rail. I think they are closer to 830ish with NB fuel pressure

 

Radistor, clutch and flywheel are sold!

 

I'll let the MCS go for 3200 complete today!

 

Prices updated on everything, AWR mounts sold