Rotrex, act clutch/flywheel, 01+ head and intake, 3.909 torsen swap
This is a new and updated list of what I have for sale. I have added parts and changed prices. If you want pictures I can get them for you. My computer took a crap so I am using my not so smart phone. I am open to any reasonable offers. I will bundle parts in a package deal if there is more than one item that you want. Please read the whole posting. I can send pictures via text if you would like to see the parts. Please read through the entire listing for updates. All prices are OBRO.
2500 01-05 rotrex supercharger C30-74 kit crossover pipe has a bung welded in for an IAT sensor. This is the kit that you will be getting, but used for about 7k maybe. http://www.shop.kraftwerksusa.com/01...em-888-118.htm 80 shipped 99-00 injectors need to be cleaned. I can get it done for you at my cost which is 124. 100 shipped 01+ injectors cleaned about 7K miles since cleaned(2@280 & 2@281 both at 35psi) 1200 3.909 torsen diff Swap (swap includes drive shaft, axles, diff and carrier) perfect for the 1.6 cars, 200 ea 01+ intake manifold I have 2 of them (1 has EGR block off plates, EGR will come with other intake). 350 01+ head about 65K (v/c, sensors, solenoid, coils and wires) 220 shipped 01+ 10:1 pistons and rods Good shape about 65k on them when removed. 20 shipped Single Din factory cuby under the radio for the NB. 40 Factory Front Strut bar. 40 shipped Racing Beat strut bar brace See link. http://www.racingbeat.com/Miata-1990...ers/56512.html This is the current list of parts that I have for sale. I may have more just don't know at this time. I will add if and when I find more. Please feel free to call/text me on my cell 3one0-7four0-77one6. Or my screenname@sbcglobal.ne for email. Have a great day, Jared |
Is the Rotex kit complete? Electronics, hardware, extras? Wideband O2?
|
Originally Posted by tuckermon
(Post 835671)
Is the Rotex kit complete? Electronics, hardware, extras? Wideband O2?
Have a great day, Jared |
Details on the "ACT flywheel and clutch" please. Which exact model is it? And do you mean "pressure plate and clutch"???
|
Originally Posted by Faeflora
(Post 835723)
Details on the "ACT flywheel and clutch" please. Which exact model is it? And do you mean "pressure plate and clutch"???
Have a great day, Jared |
Bump.
Have a great day, Jared |
Can you send me a PM with a number I can call you at. I have a question or two on the Rotrex unit.
Thanks, Drew |
Originally Posted by tuckermon
(Post 835973)
Can you send me a PM with a number I can call you at. I have a question or two on the Rotrex unit.
Thanks, Drew Have a great day, Jared |
I am going up to the bay area this weekend. If you are interested in any parts I can bring them with me when I come up. I will be leaving tmorrow night.
Have a great day, Jared |
Really..... The question I had was about the psi level and a couple of basic other items . Rotex has 5 and a 12 psi. All I wanted to know was a few details before buying something that costs so much. Sorry if you truly don't understand that. I'll pass on the purchase. Thank you so much!
|
Originally Posted by tuckermon
(Post 836167)
Really..... The question I had was about the psi level and a couple of basic other items . Rotex has 5 and a 12 psi. All I wanted to know was a few details before buying something that costs so much. Sorry if you truly don't understand that. I'll pass on the purchase. Thank you so much!
So if you would still like to ask the questions that you have feel free to read the entire first post and call me. Have a great day, Jared |
If some one else is interested in the flywheel I might be interested in the clutch
|
Bump. Have a great day,
Jared |
Bump. Shifter sold.
Have a great day, Jared |
Originally Posted by Jfornachon
(Post 836139)
I am going up to the bay area this weekend. If you are interested in any parts I can bring them with me when I come up. I will be leaving tmorrow night.
Have a great day, Jared Edit: Any chance you still have the center console? I'd be willing to make an offer on that too... |
Originally Posted by EO2K
(Post 837996)
Dammit, wish I had seen that... I kinda want that complete VVT head. Are you going to be back northward anytime soon?
Edit: Any chance you still have the center console? I'd be willing to make an offer on that too... Have a great day, Jared |
Bump.
Have a great day, Jared |
Bump.
Have a great day, Jared |
Willing to ship diff swap to 32127? It will still be a few weeks til I get a tax return, but I really want a 3.90
|
Originally Posted by JoeTheZoe
(Post 838873)
Willing to ship diff swap to 32127? It will still be a few weeks til I get a tax return, but I really want a 3.90
Have a great day, Jared |
Originally Posted by Jfornachon
(Post 838887)
I have no problem shipping it. It would be going via ups freight. it will be put on a pallet. It will not be cheep though. I would want to send it cod. As I have no way to weigh the parts. The only other way I coukd ship it is to split the pumpkin from the carrier and send the parts in different boxes. Either way they would be shipped with insurance. Let me know if you are still interested in tue parts when you get your taxes.
Have a great day, Jared |
bump.
Have a great day, Jared |
Would you be willing to sell just the EGR block-off plates?
|
Jared, as an FYI, the diff is much easier to ship separated. It was about $50 for the diff itself when I shipped mine (can't remember where to), and the carrier was $25 via USPS (WA -> NM), UPS would have been $45 as it was dimensional weight with UPS.
The diff is a pain to pack due to weight, the carrier due to size/configuration. For the carrier I ended up bolting the "ears" to a plywood board to stabilize & protect it. GLWS, the shock brace is tempting, but I haven't seen for sure if the '01 will fit under a NA hood. |
Originally Posted by Tim Irwin
(Post 839468)
Jared, as an FYI, the diff is much easier to ship separated. It was about $50 for the diff itself when I shipped mine (can't remember where to), and the carrier was $25 via USPS (WA -> NM), UPS would have been $45 as it was dimensional weight with UPS.
The diff is a pain to pack due to weight, the carrier due to size/configuration. For the carrier I ended up bolting the "ears" to a plywood board to stabilize & protect it. GLWS, the shock brace is tempting, but I haven't seen for sure if the '01 will fit under a NA hood. Have a great day, Jared |
Originally Posted by skou
(Post 839407)
Would you be willing to sell just the EGR block-off plates?
Have a great day, Jared |
Originally Posted by Jfornachon
(Post 839497)
I would prefer not, but if you would like I can make you a set. Pm me if interested.
|
Bump.
Have a great day, Jared |
Bump.
Have a great day, Jared |
All Prices are OBO>
Have a great day, Jared |
I am heading out to call speedway for the weekend. So if you want any of my parts I will gladly bring them with me. Just let me know by Friday around 5pm. I will be going out the 118 or 101 to the 10.
Have a great day, Jared |
Got my tax return, PM'ing you about the Torsen.
|
Clutch and tow hook sold. Thank you,
Have a great day, Jared |
I sent you an email about the strut brace last night. I'd like to pick it up on Sunday night.
|
Originally Posted by Ian
(Post 841725)
I sent you an email about the strut brace last night. I'd like to pick it up on Sunday night.
Have a great day, Jared |
Bump.
Have a great day, Jared |
I want the factory strut bar
|
Strut bar sold. Thank you.
Have a great day, Jared |
Do you still have the clutch and flywheel? how many miles?
|
Originally Posted by shift18k
(Post 843817)
Do you still have the clutch and flywheel? how many miles?
Have a great day, Jared |
Bump.
Have a great day, Jared |
Originally Posted by Jfornachon
(Post 843588)
Strut bar sold. Thank you.
|
I can no longer edit the first post. Please read the whole thread to fi.d out if a part has been sold.
Have a great day, Jared |
I know taxes are now starting to come back. So shoot me a reasonable offer.
Have a great day, Jared |
Bump.
Have a great day, Jared |
Factory radio cubby sold. Thank you.
Have a great day, Jared |
I have lowerd some prices. Buy this ---- or make a reasonable offer.
2500 01-05 rotrex supercharger C30-74 kit crossover pipe has a bung welded in for an IAT sensor. This is the kit that you will be getting, but used for about 7k maybe. http://www.shop.kraftwerksusa.com/01...em-888-118.htm 80 shipped 99-00 injectors need to be cleaned. I can get it done for you at my cost which is 124. 80 01+ injectors cleaned about 7K miles since cleaned(2@280 & 2@281 both at 35psi) 1100 3.909 torsen diff Swap (swap includes drive shaft, axles, diff and carrier) perfect for the 1.6 cars, 180 ea 01+ intake manifold I have 2 of them (1 has EGR block off plates, EGR will come with other intake). 340 01+ head about 65K (v/c, sensors, solenoid, coils and wires) 200 shipped 01+ 10:1 pistons and rods Good shape about 65k on them when removed. 40 shipped Racing Beat strut bar brace See link. http://www.racingbeat.com/Miata-1990...ers/56512.html This is the current list of parts that I have for sale. I may have more just don't know at this time. I will add if and when I find more. Please feel free to call/text me on my cell 3one0-7four0-77one6. Or my screenname@sbcglobal.ne for email. Have a great day, Jared |
This is a new and updated list of what I have for sale. I have changed prices. If you want pictures I can get them for you. My computer took a crap so I am using my not so smart phone. I am open to any reasonable offers. I will bundle parts in a package deal if there is more than one item that you want. Please read the whole posting. I can send pictures via text if you would like to see the parts. Please read through the entire listing for updates. All prices are OBRO.
2500 01-05 rotrex supercharger C30-74 kit crossover pipe has a bung welded in for an IAT sensor. This is the kit that you will be getting, but used for about 7k maybe. http://www.shop.kraftwerksusa.com/01...em-888-118.htm 80 shipped 99-00 injectors need to be cleaned. I can get it done for you at my cost which is 124. 100 shipped 01+ injectors cleaned about 7K miles since cleaned(2@280 & 2@281 both at 35psi) 1100 3.909 torsen diff Swap (swap includes drive shaft, axles, diff and carrier) perfect for the 1.6 cars, 180 ea 01+ intake manifold I have 2 of them (1 has EGR block off plates, EGR will come with other intake). 320 01+ head about 65K (v/c, sensors, solenoid, coils and wires) 200 shipped 01+ 10:1 pistons and rods Good shape about 65k on them when removed. 40 shipped Racing Beat strut bar brace See link. http://www.racingbeat.com/Miata-1990...ers/56512.html This is the current list of parts that I have for sale. I may have more just don't know at this time. I will add if and when I find more. Please feel free to call/text me on my cell 3one0-7four0-77one6. Or my screenname@sbcglobal.ne for email. Have a great day, Jared |
Bump. Buy my ----. Make some offers, but please be reasonable ones. Thank you.
Have a great day, Jared |
Bump.
Have a great day, Jared |
Bump.
Have a great day, Jared |
pm'd you
|
Bump. Throw out some offers. Guys.
Have a great day, jared |
Bump.
Have a great day, Jared |
pm sent about diff/
|
Originally Posted by scootermx-5
(Post 855698)
pm sent about diff/
Have a great day, Jared |
Bump.
Have a great day, Jared |
PM'd
|
Bump.
Have a great day, Jared |
Bump. Throw out some reasonable offers.
Have a great day, Jared |
All times are GMT -4. The time now is 11:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands