For Sale Feeler: Tein SS coilovers
#1
Elite Member
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
For Sale Feeler: Tein SS coilovers
UPDATE: No longer a feeler. These are now up for sale.
Priced reduced to $625 because I need to keep the stock tophats. You will need to move over your stock ones, no big deal. You do not even need a spring compressor to install the tophats on the Teins. Everything else is included: shocks, springs, preload adjusters, bumpstops, boots, preload adjuster wrenches. Send me a PM to confirm that you are still in. I'll go with the original PM order sent for first right of refusal.
So I have a set of complete and in good condition Tein SS coilovers I may be selling very soon. They fit both NA and NB, and have 8 kgf/mm front (448 lb/in) 6 kgf/mm rear (336 lb/in) rate springs. The rears have brand new NB top hats and bushings. I also have the adjuster wrenches which are in very good (practically new) condition.
The SS is a step up from the Basics in that the damping is adjustable via an adjuster on the top of the shock. I just installed them in my LS1 Miata but due to this V8 conversion's very, very low chassis height I may need to get something else. They will work great in a 'normal' Miata. Fully assembled, just bolt them in.
$650 plus shipping in the lower 48 or pickup in SA for $650. If anyone is seriously interested let me know. I'll post pictures if/when I put them up for sale. Otherwise they look just like Tein SS coilovers.
More info here:
TEIN USA | PRODUCTS | SUPER STREET
These sell for $1100 new.
Priced reduced to $625 because I need to keep the stock tophats. You will need to move over your stock ones, no big deal. You do not even need a spring compressor to install the tophats on the Teins. Everything else is included: shocks, springs, preload adjusters, bumpstops, boots, preload adjuster wrenches. Send me a PM to confirm that you are still in. I'll go with the original PM order sent for first right of refusal.
So I have a set of complete and in good condition Tein SS coilovers I may be selling very soon. They fit both NA and NB, and have 8 kgf/mm front (448 lb/in) 6 kgf/mm rear (336 lb/in) rate springs. The rears have brand new NB top hats and bushings. I also have the adjuster wrenches which are in very good (practically new) condition.
The SS is a step up from the Basics in that the damping is adjustable via an adjuster on the top of the shock. I just installed them in my LS1 Miata but due to this V8 conversion's very, very low chassis height I may need to get something else. They will work great in a 'normal' Miata. Fully assembled, just bolt them in.
$650 plus shipping in the lower 48 or pickup in SA for $650. If anyone is seriously interested let me know. I'll post pictures if/when I put them up for sale. Otherwise they look just like Tein SS coilovers.
More info here:
TEIN USA | PRODUCTS | SUPER STREET
These sell for $1100 new.
Last edited by ZX-Tex; 03-02-2010 at 01:16 PM.
#6
Elite Member
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
Getting lots of response for these. Thanks guys. If I sell these I'll give each of you first right of refusal in the order in which you PMd me. I'll get the shipping quotes if/when I officially put them up for sale.
#7
What timing are you thinking about for the actual sale (if it happens)?
#8
Elite Member
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
If I can find a set of used Tein Flex in good condition at a good price then I'll sell these right away. If not then I'll have to keep these and save up for a new set of Flex; that could take awhile.
#9
Elite Member
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
OK I'll probably be selling these. I will know for sure by tomorrow.
Thing is though I will need the stock tophats front and back for the setup I would be replacing these with. So I'll knock $25 off the price for having to move over your stock ones, easy to do. The boots, bumpstops, and wrenches will still be included.
For those who have sent me PMs let me know if you are still in.
Thing is though I will need the stock tophats front and back for the setup I would be replacing these with. So I'll knock $25 off the price for having to move over your stock ones, easy to do. The boots, bumpstops, and wrenches will still be included.
For those who have sent me PMs let me know if you are still in.
Thread
Thread Starter
Forum
Replies
Last Post