Selling my ABSURDflow set-up :cry:
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Selling my ABSURDflow set-up :cry:
Well, the good stuff is on it's way to Holland, the exhaust and intercooler are left:
Exhaust: $300
Enthuza 3" with with cat on v-band flange, two bolt out the back
BEGi #3 intercooler with no pipesr: $350
It makes me sad to see it go because it is the nicest thing I have ever owned, but I want to be competitive in TTD and this is what must be done. This set-up made 210whp at 9psi, 250whp at 12psi, and ~300 at 18psi. When you open the hood on the car, it attracts a crowd...it's art. Again, it breaks my heart to sell it, but it is better served by someone else who will use it rather than let it sit in my garage.
Manifold and DP: $1000
Standard AF stuff, manifold is beautifully repaired as you can see. It made it 4-year and roughly 150 track hours of extreme abuse.
Turbo with TiAL housing:$1700
0-mile GT2860RS with the TiAL housing, Inconel CHRA-turbine hardware EDM drilled for safety-wire, and a TR30R bearing installed by Owens Developments. The bearing is the same bearing that goes into a BTCC, WTCC, or WRC racecar as I understand it. You don't have to run water to it, but it's not a bad idea.
Wastegate: $250
Old TiAL MV-S without water connections
Everything goes for $3200.
Pics:
Still considering my turbo stuff? Here is the manifold:
If you don't like my prices, make an offer. I might be able to get you a break on shipping through a friend's account, but no promises. I prefer a bank transfer or a check, green-backs get a price break, I will consider meeting you half-way for the exchange. I understand you are sending a lot of money when purchasing, please consider that I work for a federal agency and a complaint to the FBI concerning mail-fraud would not be well-received and would end my employment...so I'm a trusted seller.
Exhaust: $300
Enthuza 3" with with cat on v-band flange, two bolt out the back
BEGi #3 intercooler with no pipesr: $350
It makes me sad to see it go because it is the nicest thing I have ever owned, but I want to be competitive in TTD and this is what must be done. This set-up made 210whp at 9psi, 250whp at 12psi, and ~300 at 18psi. When you open the hood on the car, it attracts a crowd...it's art. Again, it breaks my heart to sell it, but it is better served by someone else who will use it rather than let it sit in my garage.
Manifold and DP: $1000
Standard AF stuff, manifold is beautifully repaired as you can see. It made it 4-year and roughly 150 track hours of extreme abuse.
Turbo with TiAL housing:$1700
0-mile GT2860RS with the TiAL housing, Inconel CHRA-turbine hardware EDM drilled for safety-wire, and a TR30R bearing installed by Owens Developments. The bearing is the same bearing that goes into a BTCC, WTCC, or WRC racecar as I understand it. You don't have to run water to it, but it's not a bad idea.
Wastegate: $250
Old TiAL MV-S without water connections
Everything goes for $3200.
Pics:
Still considering my turbo stuff? Here is the manifold:
If you don't like my prices, make an offer. I might be able to get you a break on shipping through a friend's account, but no promises. I prefer a bank transfer or a check, green-backs get a price break, I will consider meeting you half-way for the exchange. I understand you are sending a lot of money when purchasing, please consider that I work for a federal agency and a complaint to the FBI concerning mail-fraud would not be well-received and would end my employment...so I'm a trusted seller.
Last edited by hustler; May 29, 2013 at 09:04 AM.
Reply
0
0
Reply
0
0
Any chance you'd be willing to sell the turbine housing with the manifold/downpipe? I've got a brand new T28 housing I just put up for sale if you'd be willing to swap them out:
https://www.miataturbo.net/miata-par...e-s-bov-71583/
https://www.miataturbo.net/miata-par...e-s-bov-71583/
Last edited by pdexta; Mar 19, 2013 at 09:14 AM.
Reply
0
0
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Any chance you'd be willing to sell the turbine housing with the manifold/downpipe? I've got a brand new T25 housing I just put up for sale if you'd be willing to swap them out:
https://www.miataturbo.net/miata-par...e-s-bov-71583/
https://www.miataturbo.net/miata-par...e-s-bov-71583/
Reply
0
0
put the parts on my car, you can drive it occasionally when you have a longing for turbo goodness.
PS: Saw this stuff Friday, its epic. Only a few Lewinsky-style stains on the oriface where the turbo mounts up.
PS: Saw this stuff Friday, its epic. Only a few Lewinsky-style stains on the oriface where the turbo mounts up.
Reply
0
0
Sorry I guess I'm confused on the housing terminology. The turbine was for my GT2871. I wasn't trying to be a dick, was just interested in the manifold/downpipe but would need a new turbine housing for it to work.
Reply
0
0
Reply
0
0
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Reply
0
0
If only my tax return was double, could buy it all.
Been dreaming of vbands for awhile. ( or any absurdflow mani )
Could I get a price pmed for mani, dp, turbo, and wastegate?
Longshot but if finally got my torsen sold and my tax returns in, might be in the running.
Been dreaming of vbands for awhile. ( or any absurdflow mani )
Could I get a price pmed for mani, dp, turbo, and wastegate?
Longshot but if finally got my torsen sold and my tax returns in, might be in the running.
Reply
0
0
Thread Starter
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Reply
0
0
