Some misc. turbo parts...
I have a compressor from an IHI turbo, it's small and I have no idea where it came from. I work occasionally at a junk yard and I find stuff. I also have a T3 turbine that was attached to a manifold that said "ford" on it. I think it may be from a SVO mustang or a thunderbird turbo coupe. The turbine still has the outlet bolted to it and the CHRA, but I have no compressor for this. It spins ok, with very very slight side to side shaft play.
These items are pretty much on here for anybody who has a use for them, all I would ask is you pay for shipping. Pics available on request. |
pictures of the t3 please!
|
Will take the t3 if zoomin doesn't (dont you already have 5, how many more do you need ;))
|
T3 pics
2 Attachment(s)
|
Interested in the IHI.
Thanks. |
|
Nevermind. I needed a stardard T3 5 bolt outlet.
|
Originally Posted by zoomin
(Post 488689)
.48 or .63 AR? and where is the compressor housing?
|
Some t-birds/svos/merkurs also used a ihi turbo. This looks to be one of them. Maybe the compressor is for this turbo after all.
|
that is indeed an IHI, the t3 would have 6 bolts holding the chra to the turbine housing.
|
compressor
2 Attachment(s)
|
This turbo has 4 bolts holding the CHRA to the turbine, but the flange that goes to the manifold is a T3 flange. The water ports are both on the same side, which I found kinda weird as I've never seen that before. I found the compressor in the begining of the summer, and I found the turbine and the CHRA on Sunday. They actually look like they match though, but I can't find the hold down hardware for the compressor, it as you can see, has 6 bolts around the housing. There are numbers stamped on the turbine, but nothing that has A/R after it. I do now believe it is an IHI cause if it was a Garrett, it would have a Garrett stamp on it somewhere. Let me know guys, pay for shipping and it's outta here.
|
Turbo Coupes had a IHI RHB5 with a t3-flanged exhaust housing with who knows exhaust side.
Merkurs had a normal garret CHRA t3 SVOs I think were also normal T3s |
what about an ihi vj11 ? i have one in the garage have no clue if it could be used
|
Originally Posted by djcommie
(Post 490688)
Turbo Coupes had a IHI RHB5 with a t3-flanged exhaust housing with who knows exhaust side.
This compressor housing doesn't match either Ford Turbo Coupe one I have on hand. They both say "Warner Ishi" above the IHI Turbo casting, and have a rectangular stamp plate sticking out to the right of that, closer to the compressor outlet. Otherwise I'd be interested. You can't have enough rebuildable backups with a hard to find turbo. |
All times are GMT -4. The time now is 12:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands