Time for another round of garage clean out. I get shipping discounts from UPS and can pass along those savings for shipping costs.

1) Tein Flex Mono Coilovers – revalved & custom spring rates (14k/ 10k; or 784/560). <10k miles; like new. These are monotube shocks and the body length is adjustable. I removed these from my turbo track car and replaced them with XIDAs; put down the same lap times. So, this is a quite capable setup. Tein has made a lot of different suspension setups and has put the name “Flex” on quite a few of them, however this is the best suspension they have ever offered for a Miata. Don’t confuse them with their lower end offerings like the twin-tube, non-rebuildable Flex Zs. More information here: TEIN.com: MONO SPORT - PRODUCTS. These are currently on sale for $1620 shipped from Goodwin. $975 + shipping SOLD

Box will be 24x24x20 and 51lbs; shipped from 30339 if you want to estimate shipping.

2) M Tuned Coolant Reroute – 1.8 version from Flyin’ Miata; good condition. $160 + shipping (SOLD)

3) Racing Beat Header – 1999-2000 version. Was sent to Swain Tech to have White Lightning exhaust coating applied at a cost of $250. This is a ceramic coating that lowers that lowers radiant heat under the hood, thus lowering intake temps and heat-related wear in the engine bay (read more here: White Lightning Exhaust Coatings Swain Tech Coatings Industrial Coatings High Performance Racing Coatings). Note that the small dent is a part of the design from RB; provides clearance for steering. $375 + shipping (SOLD)

4) NB Front Control Arms With Energy Suspension Bushings - $150 + shipping

5) Hard Dog Harness Bar - $125 + shipping (SOLD)

6) Hard Dog Roll Bar Pad & Cover – includes high density foam insert + leather cover. Fits Hard Core Double Diagonal. Like new. $115 + shipping.

7) IO Port Roll Bar Camera Mount - $25 + shipping (SOLD)

8) NB Subframes/ Control Arms/ Knuckles/ Steering Rack – I have all of this for any NA owner that wants to update to the improved suspension geometry of the NB. The fronts are the ones listed above with Energy Suspension bushings installed; can buy a set of rear bushings for the rear for $115 from Summit. PM me if interested.

Tein Mono Flex








M Tuned / Flyin' Miata Coolant Reroute







Racing Beat Header





Front Control Arms with Energy Suspension Bushings



Hard Dog Harness Bar


Hard Dog Roll Bar Cover


IO Port Camera Mount



More photos here: https://photos.google.com/share/AF1Q...dZTDI4c1VOTHhn

 

post #2 reserved for additional photos to be added

 

PM set about header.

 

 

Sent you a pm.

 

These shocks came on a complete Miata a purchased, and the work was done prior to my purchase. I can look the remaining records I have from the car, but don't recall seeing any documentation on the suspension. The car itself was a "spare-no-expenses" build, and everything was done right; expect the suspension work was handled the same way. Here is the car: https://www.miataturbo.net/build-thr...405rwhp-59306/

 

Sent you a pm too.

 

If the header falls through, let me know. Interested.

 

 

I didn't flake. My internet was down for over 2 weeks. The 3rd tech finally fixed it last night. Please let me know how to contact you.

 

 

payment sent via Paypal. for the camera

 

Received. Will box it up and send it out. Thanks man!

 

Hey I have a single diagonal harddog bar. Would that wrap work on mine?

 

You may be able to adapt it to work, however Hard Dog sells a specific cover for the single diagonal bars. The cover itself has cutouts for each of the diagonals - so, likely there would just be an extra cut out where there is no diagonal.