"thuper duper awethum pothum" FM/ABSURD/CUSTOM *uber spool* turbo setup
Hey all, I bought a turbo setup here almost two years ago now, and I've decided to go another direction with my car.
I bought the setup from Chilicharger, from this thread: https://www.miataturbo.net/miata-par...rbo-kit-84683/ He himself bought it from 18psi, from this thread: https://www.miataturbo.net/miata-par...o-setup-82263/ Kit includes everything listed and shown in those pics; I never got around to installing it (just fondled it). I'm asking the same $2500 for it, including shipping (depending where you're located). Price is firm at the moment—don't need the cash to finance any other purchases, so not in a rush to sell. Part of my plans for the kit included fuel injectors, so I'd bought a set of GT500 injectors from CJ Pony Parts, plus the requisite EV6 female-Denso male adapters, FlowForce 12mm tophats/extenders, and a set of Denso lower seals. I'd include all that for what I paid: $191. |
Whoever buys it this time has to promise to actually install it :rofl:
|
:laugh:
|
Good luck with sale, good street setup for a normal sane person.
|
Originally Posted by thumpetto007
(Post 1416727)
If you could make that manifold cast, and magically change everything to V-band, I'd buy it right now. Way too many welds for me to crack, and bolts to back out.
Good luck with sale, good street setup for a normal sane person. |
Holy shit I was just thinking about this kit the other day!
|
Would install instantly. No funds however. Would LOVE to put my 3" Artech exhaust back on without it being 300dB.
|
Originally Posted by Chilicharger665
(Post 1416807)
Holy shit I was just thinking about this kit the other day!
|
this would be the perfectest daily driver setup. all the torque, all the time, enough to have a hoot, but not enough to bend rods.
that manifold was custom made, for G, by none other than TurboTimmah of ABSURDFLOW. Need I say moar? |
PM'd
|
Wow such a deal I'm actually tempted... but I'd have to re-cam and shim so boooo
|
Originally Posted by thumpetto007
(Post 1417118)
PM'd
|
Originally Posted by thumpetto007
(Post 1417118)
PM'd
https://media.giphy.com/media/cnu2qaROQjzs4/giphy.gif |
Originally Posted by 18psi
(Post 1416863)
this would be the perfectest daily driver setup. all the torque, all the time, enough to have a hoot, but not enough to bend rods.
that manifold was custom made, for G, by none other than TurboTimmah of ABSURDFLOW. Need I say moar? Someone use this manifold please! |
Can you please post pictures of the parts you have? It would persuade me to waste more of my money.
Or have you already sold this? |
6 Attachment(s)
Intercooler:
Attachment 230042 Downpipe, IC tubing, hard lines: Attachment 230043 Turbo+mani, more IC tube, heat shields, other misc. parts: Attachment 230044 |
Damn, I'm tempted to do something youthful, impulsive, and absurd, and try to figure out how to make this kit into a fast-spooling, low-boost, track-reliable setup. M-U-S-T. R-E-S-I-S-T. T-R-U-B-O.
[Looks for compressor map for that turbo.] |
^ You arent allowed to. Im close to having enough monies. Plus this isnt a track setup. This is a decent street setup.
Can anyone confirm that the downpipe included in this kit fits the stock midpipe on a 2001? |
Yes.
And this can absolutely be a track setup: strong mani, check. inconel, check. everything else set up to take abuse, check. ...wait, I see what you were doing there :D |
Yes, I was going to have to buy an NA downpipe to make this work with my car.
Thanks for helping out with the sale, 18psi! ;) |
I thought you had to have a cast manifold to reliably track your turbo Miata?
|
Hey! I know that manifold!
I honestly slightly regret selling it. Its sale caused me to spiral into my current oblivion. |
Luckily for you it's for sale again!
|
Originally Posted by freedomgli
(Post 1418234)
I thought you had to have a cast manifold to reliably track your turbo Miata?
|
Thanks Larz!
Abe@ARTech and Matt@Hellafab both produce great manifolds, and they look prettier too! If this manifold was to be used on a dedicated track car, bouncing off the rev limiter on banked straights like Sav does, I would recommend some gussets overlapping the welds. Or just run it and fix/gusset the cracks when they form; fixing weld elbow manifolds is relatively simple, not so for most cast manifolds. |
Originally Posted by TurboTim
(Post 1418545)
fixing weld elbow manifolds is relatively simple, not so for most cast manifolds.
|
So does this come with an intake? or just the heat shields for an intake?
Does this fit the oem midpipe? Still unsure what model years this kit is for. I have a 2001 with A/C. Leafing through the various for sale threads, it seem this will fit an A/C car, but still not sure about total fitment, intake, or stock exhaust compatibility. Another PM sent. |
Supposedly the fit is for an NB. I was going to have to get the additional parts to make it fit my NA and hope I could sell the NB-specific parts (AFAICT the intake heat shield and downpipe). EO2K and 18psi should be able to answer any other fitment questions.
|
Just buy this already, so I don't have to.
|
Go for it man, my final offer was shot down. I'll just go with a brand new MKturbo setup, or FM setup.
|
Originally Posted by Steve Dallas
(Post 1419445)
Just buy this already, so I don't have to.
|
PM'd
|
Boosting this to the top (sorry, couldn't help myself).
|
Sold locally.
|
So no one on here? Just for my records.
|
He may be on here; but I wouldn't know his handle here.
|
Hey yeah new owner Zack here! This will be installed finally.
|
Originally Posted by muthagoose
(Post 1424539)
This will be installed finally.
|
Originally Posted by muthagoose
(Post 1424539)
Hey yeah new owner Zack here! This will be installed finally.
you bought a really solid kit, you will love it. |
All times are GMT -4. The time now is 01:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands