Turbo partout, megasquirt 2, sway bar, ID 1000's, coolant reroute, gauges, and more.
 

I'm doing an ls swap because 'Merica and all of the parts that I won't be reusing with the new setup are for sale. This turbo setup served me well and was reliable until I killed first, second, third, fifth, and reverse gears all at once. I guess it just makes that much power.

The engine is a 1.8l and the car is a 94 r package. Prices don't include shipping. I apologize if can't respond to your inquire right away--I'm kind of swamped. If my PM box is full, don't fret. You can reach me via email at cgbagne atgmaildotc0m. Actually, it may be best if you went straight to email. With the PM box, I have to keep deleting messages so it's hard to keep track of who wants what.

Photos of all of the parts can be found here. https://plus.google.com/photos/11393...L2cs6uY7MG2-wE

Bell Engineering T3 manifold (Black ceramic coated) $350 including inconel studs
Trackspeed Engineering Inconel turbo studs(included with manifold)
Bell Engineering polished turbo heat shield $75
SR20DET T25 turbo Turbocharger .80 A/R compressor housing, .64 A/R turbine housing, .60 turbine trim (Black ceramic coated turbine housing) $175 SOLD
SS oil feed line $40 SOLD
Bell Engineering stainless 2.5" downpipe $200
Custom mandrel bent catless 2.5" exhaust $150. Too big to ship
Magnaflow muffler --part of the previous item
Tial Q BOV v-banded to intake pipe $250
CXRacing intercooler. 28x5.5x2.5 w/ silicone couplers, T-bolt clamps $60 SOLD with piping
Flyin' Miata Stage 1 clutch $150 SOLD
RX7 460cc injectors $100
Injector Dynamics 1000cc injectors $400
Toyota Coil On Plug (COP) conversion $220
Megasquirt 2 full standalone EMS $375 SOLD
BEGI coolant reroute $175 SOLD
Mazdaspeed engine mounts $50 SOLD
GTX PCV valve(goes with engine)
Escort GT engine(identical to Miata engine) with ~60k miles with all seals replaced about 10k miles ago. I'll include the Mazdaspeed mounts. $600 SOLD
Flyin Miata frame rail braces $120 SOLD
Racing beat solid front sway bar $100 SOLD
Goodwin full replacement triple gauge pod $40
Autometer Pro Comp Mech. Boost, Elect. Water temp, Elect. Oil Temp $75 for all three SOLD
Cruise control components(actuator, dash switch, computer) I'll trade my other cruise parts(brake switch, accelerator assembly, stalk controls) for your non cruise parts $50
HVAC components(ac parts, blower, air distro box, etc) price depends on what you want
Bosch e-code headlights $20 SOLD
Most interior parts price depends on what you want
OEM gauge cluster with ~100k miles $80
OEM radiator. Good condition aside from a few bent fins. $60
OEM radiator fans. $40 each
OEM steering wheel $20


https://www.miataturbo.net/attachmen...ine=1343670323

I might be interested in

and

What would you want for those?

Pm sent!

How about $175 for the turbo and $175 for the reroute, or $325 for both.

Yhpm!

Did you run the T25 turbo on the T3 manifold?

I'd be interested in the oil feed line, DP, 460 injectors, gauge pod and some gauges! PM sent to you sir.

Yes. Does that mean that it isn't a t3 manifold? The previous owner installed the bulk of these parts so I'm going off of the information that he provided me.

I be sending PMs

Let me know about the triple gauge pod and all gauges! Thanks in advance. Also if original bidder backs out on the sr20 turbo.

Please add prices for everything you have listed. It is one of the rules for the for sale section. Other then that GLWS.

Pretty sure it's a forum rule to put prices on everything.

How much for the heat shield and coolant reroute? Separate prices please.

Are you parting out the entire car? I'd be interested in a gauge hood, and the metal bracket on the top of the front bumper.

edit: profile says 1.8, nvm!

PM sent

interested in the coolant reroute if no one has called dibs already. pending price of course

You selling that Spar... I mean boost controller?

Interested in downpipe And IC pipes.
Edit: also interested in rx7 injectors

They are 130 shipped for a new one! It does look kind of funny in a 22yr old dash.

how much for the manifold? don't worry about shipping, i have a UPS account. pm me but i can't pm you back so please send me your email or something.

thanks!

PS - i can keep my p/s and a/c with the Begi right?

sent you an email

I want info/prices on the motor. Possibly to the COPs and coolant reroute to go with it. I can pick it all up, but I'm mainly interested in the motor. Your PM box is full, so PM me with a price and info when you get the chance.

Looks like you PM box is full, please let me know how much you want for the oil temp gauge.

How much for the fm rails shipped to ca
94596?

Interested in front swaybar, engine mounts, and MS2. PM prices?

You're getting PM on ID1000s.

If brainzata doesn't get the frame rails I am interested in them.

Your inbox is full. Was wondering how much you wanted for the ID 1000s? How long were they ran on the car, what model number are they and could you send some pics. Thanks, Jeff.

I'll take the sway bar if its still available!

ms2 is wired for na8ce? I'm interested please send me a pm.

interested in frame rails and sway bar shipped to 91766 please,

Have Paypal ready to send for reroute if still available. PM me address

Question about the cruise control stuff...does it come with the stalk on the column and all the stuff for the brake pedal?

All PM's have been answered. I included an email address in my OP in case my PM box fills up again, and it probably will seeing as I'm limited to a measly 25 messages. :/ A link to all of the photos has been added to the OP as well.




I have the actuator that connects to the gas pedal and I have the dash switch. If you also need the stalk that's on the column, I suppose that we could trade stalks. Can you go more in depth on the other stuff? The cruise control was functional when I bought the car so I can probably come up with it.

Emailed you and have been PMing you when can u get the downpipe and oil feed.....I have the cash in hand and can get Saturday please respond to me.....

From the miata.net garage section

There are 6 required components, and 3 small parts as follows: servo unit with accelerator cable attachment and vacuum hose; computer module; steering column clockspring/stalk assembly; brake switch; accelerator pedal assembly; main on-off switch; 2 retaining or "E" clips to secure the pedal assembly; 1 bushing which attaches to the accelerator pedal.

PM is full, email sent.

lol what he said, that is all the stuff required to adapt cruise control to a none cruise control car. If I'm not mistaken the pedals can be modified to work

Emailed. PM box here sucks ass.

PM'd about BEGI heatshield. Not sure you got it, but I'll take it if you'll ship to the UK. I'll cover shipping costs if they're reasonable.

Graham.

emailed on the turbo.

All emails and PM's have been replied to. Once again, email is the best way to reach me due to the tiny capacity on this site. My email address is in the OP.

Okay, thanks for the info. I didn't get a chance to dig through my heaps of stuff today--hopefully tomorrow.

Another email about the turbo. Paypal ready.

address and money sent for turbo.

Thank you. I'll ship it today.

I just want to say that Curt is awesome.

I'm picking up parts from him this weekend, he's been great with communication.

I'd recommend buying from him, I'm sure I will in the future if he's got parts I need.

Sent monies for headlights!

Thank you. I appreciate your posting this. See you tomorrow.

Monies received. Thank you. I'll send them out today.

Got them a few days ago. Thanks!

I still have a number of parts available. The gallery that I linked to in the OP now has photos of the ID1000's.

Emailed!

update on whats still for sale??

The original post has the rundown on what's still available and what has sold.

Update:

Still available are:
Tial Q BOV v-banded to intake pipe $250
Cruise control components(actuator, dash switch, computer) Let me know what you want for pricing
HVAC components(ac parts, blower, air distro box, etc) price depends on what you want
Most interior parts price depends on what you want
OEM gauge cluster with ~100k miles $80
OEM radiator. Good condition aside from a few bent fins. $60
OEM radiator fans. $40 each



Everything else has sold.

Email sent

Did you buy that intake pipe with v-band adapter or did you have a flange welded on? Curious because I want to run something similar in the future

The v-band flange came with the BOV and I had a fabricator weld it to the pipe. The BOV and pipe are still available for $250 if you want the set. Genuine Tial Q goodness with the stiff spring.

https://www.miataturbo.net/attachmen...ine=1362671307

https://www.miataturbo.net/attachmen...ine=1362671307

It's exactly what I will be using but my next purchase is my ARTech Manifold / DP Lol

wantttt than manifold but need other stuff to get the car going. maybe you will still have it in a little bit

The manifold has sold. For whatever reason I can't edit the original post anymore so an updated list is in post 53.

email sent