used turbos FS
 

is there any interest out there for used turbos, no guarantees, for about $70-$80 plus shipping ($20 -$30) depending on location? mostly garrett t3s and t25s some mitus'. not looking to make a living at this. im just a broke college student trying to feed the need for speed.

I'd probably pick one up.

Hell rebuild kits are only like 50 bucks right? not too shabby

if you're interested pm me with what you want (t3, t25, td04,td05 is basically what i can get reliably), and we'll work something out.

i should mention that these are turbos from a pick-n-pull. i dont want anyone to be misled. im running one (saab t3) right now on my 91 and it works fine. i wouldnt pull one i wouldnt put on my own car. i wont pull one unless it has minimal wiggle and spins freely. just wanted to be square with you all.

this also implies that newer models will be harder but not impossible to come by.

I'd give you $50 for a saab t3 that has loads of shaft play... as long as the housings are in good shape... that's all I am looking for. Saab does have standards ins and outs right?

saab has standard in and outs. it takes just as much time as to pull a good turbo as it does to pull a bad one. $70- $80 sorry bro.

I would take one if is was under $30 to ship

turboMiatKid: pm sent

If they're from a PnP, you know they came out of a running car.
Is it me, or is a mid-eighties Escort the most common car on earth to wreck.

I shipped my SR t-25 for like $14 bucks, or maybe it was $24...I can't remember.

if you know of a make, model and year range, it would be easier for me to find what you want.

spamnavy: down here most of what i see are volvos, saabs and benz. dsm now and then.

I will figure out what I want soon. I'm still looking for the best sub 200 hp (sub 175 hp?) quickest spooling turbo for my 1.6. Looking at the maps, it seems like I want the TD04-09B from a 3000GT, yet no one talks about it here. I think the 16G map looks awful for my 1.6. It's probably a question for another area, but does anyone here have any advice? I drive it on a road course, so I'd rather have quick spooling and less hp than big hp and lag. Anything is better than the 100 hp I have now!

i make 2psi by 1800 rpm but i dont run a IC either. the 16g flows real well for my 1.6. but i dunno if you where closer and i wasnt leaking oil out the pan seal i would let you try mine, to see for your self i autoxd it once just had to put it in 2nd and slide arond the track till i could get it into 3rd made plenty of low end power/speed.

Is that the 16G big or small? I just bought the Megan manifold and downpipe for $130 shipped from another thread here. That will work with T25, right? I don't plan to run an IC either. I have a MS and the right injectors. This turbo install could be cheaper than I had ever imagined! What's a common T-25 that people are using? Zebro, I would think I would box you in by listing cars. Can you narrow me in to what you usually find T25s on?

The only T25 that will fit on the megan manifold.dp is the dsm t25 found on the gen 2 dsm cars. It's a dsm-flange specific combo.

So does that mean I have to run the 16G with the Megan?

or a 14b, or 13g, 13b, dsm T25...all sorts of options

hey Zebro, can you send me a price for a 14b, or 16g.
donrt where you'll find a 16g , but a 14b came in the 1st gen eclipse.

T25 from a 93 Nisan 300Zx is what you seek ;)

I'd probably be down for a 14b in good shape too. TDO5H-14b :)

Jefe,

That's probably the recommendation I have been looking for, though now that I bought a Megan manifold and downpipe, I think I'm going to try a 14b for now. For the money I'll have invested, I can easily change my mind and try something different later.

I am getting a T25 from Zebra, the check is on it's way to him, I'll update you all when the turbo arrives ;)

Zebro,

How long would it take you to find me a 14b?

Por Favor, a 16g or 14b prefferably. if it comes down to "hey look kid, your never gonna get it," I might take a t25.

I'll pm the same message.

I need a SR20 T25 turbo. Let me know if u find one

I could use a T04E, prefferably 50 trim, 4 bolt hotside, .63 A/R

Scratch my request. I bought a 16G brand new on Ebay for $260.

i have a t3 ready to ship. $110 including shipping. its off a saab. minimal shaft play and spins freely. i just want it to be clear though, there are no guarantees on this thing.

Mind sending me a pic? I PM'd you my e-mail addy. I think all the saab T3s are similar on in/out, but I want to be sure.

Think you could knock that down to $100? Take Paypal?

How bout a turbo from a dump truck lol, Im gonna pop that bitch in( do you think I'll have too much lag :)

Hold up on that T3 it might work for me I will let you know.

:rofl: akthor pms are there for a reason.