VVT go-fast parts feeler
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Bolton, UK
Posts: 3,022
Total Cats: 120
VVT go-fast parts feeler
Since I'm almost being forced to sell/part-out my car and associated go-faster parts due to lack of funds, I figured I'd place a feeler ad here too.
All parts are brand new in their boxes, only opened to be ogled. Never ever used.
I haz:
Boundary eng. billet VVT oilpump, 1 shim $425
Wiseco pistons, 10.5:1 CR, 84mm $450 (kitty on pic NOT included)
Manley connecting rods w/ ARP2000 bolts $300
Hondata phenolic intake manifold gasket for 99+ heads $40
Squaretop (2001) intake manifold (this one is used obviously) $400
Supertech single valvesprings, seats and Ti retainers (no original box unfortunately) $300
Supertech valveseals $10
Supermiata/949 sport clutch , 1.8 size, organic disc, unsprung hub $300
Supermiata/949 harmonic balancer w/ 4-tooth trigger wheel (stock NB setup) $400
Supermiata shim-under-bucket lifters $325
ACT Prolite flywheel (needs resurfacing) $200
Skunk2 throttlebody w/ 99+ IAC adapter (can include 99 IAC and TPS if wanted) $300
Fuel Injector Clinic 445 cc/min EV14 injector w/ PnP connector pigtails $300
99 fuel rail w/ damper and spacer, works w/ 99 or VVT head and squaretop intake manifold $50
ACL Race bearing set (mains + rods), stock size (might sell locally)
ARP headstuds (might sell locally)
ARP main studs (might sell locally)
MSLabs MS3basic for '94 1.8 car. Included CAN module for digital Innovate WBO2 input through DB9 cable, onboard RTC, knock module (used stock 99 sensor), DB37 harness for WBO2 power/ground and various in- and outputs. $950
Innovate LC-1 (used) $110
Innovate MTX-L (used, includes all gaugeplates/bezels etc) $140
If there's enough interest for most parts I will pick them up from my builder guy and ship within a week or so.
All prices are OBO, mind you, shipping is from the Netherlands, so keep that in mind when lowballing me. Most smallish things could be shipped for <$30. Will get exact quote when you provide an address.
Paypal preferred, add 3% fees or send as gift.
Thanks for looking
All parts are brand new in their boxes, only opened to be ogled. Never ever used.
I haz:
Boundary eng. billet VVT oilpump, 1 shim $425
Wiseco pistons, 10.5:1 CR, 84mm $450 (kitty on pic NOT included)
Manley connecting rods w/ ARP2000 bolts $300
Hondata phenolic intake manifold gasket for 99+ heads $40
Squaretop (2001) intake manifold (this one is used obviously) $400
Supertech single valvesprings, seats and Ti retainers (no original box unfortunately) $300
Supertech valveseals $10
Supermiata/949 sport clutch , 1.8 size, organic disc, unsprung hub $300
Supermiata/949 harmonic balancer w/ 4-tooth trigger wheel (stock NB setup) $400
Supermiata shim-under-bucket lifters $325
ACT Prolite flywheel (needs resurfacing) $200
Skunk2 throttlebody w/ 99+ IAC adapter (can include 99 IAC and TPS if wanted) $300
Fuel Injector Clinic 445 cc/min EV14 injector w/ PnP connector pigtails $300
99 fuel rail w/ damper and spacer, works w/ 99 or VVT head and squaretop intake manifold $50
ACL Race bearing set (mains + rods), stock size (might sell locally)
ARP headstuds (might sell locally)
ARP main studs (might sell locally)
MSLabs MS3basic for '94 1.8 car. Included CAN module for digital Innovate WBO2 input through DB9 cable, onboard RTC, knock module (used stock 99 sensor), DB37 harness for WBO2 power/ground and various in- and outputs. $950
Innovate LC-1 (used) $110
Innovate MTX-L (used, includes all gaugeplates/bezels etc) $140
If there's enough interest for most parts I will pick them up from my builder guy and ship within a week or so.
All prices are OBO, mind you, shipping is from the Netherlands, so keep that in mind when lowballing me. Most smallish things could be shipped for <$30. Will get exact quote when you provide an address.
Paypal preferred, add 3% fees or send as gift.
Thanks for looking
Last edited by Oscar; 12-10-2013 at 05:07 PM. Reason: added pictures
#2
I would be interested in the pump, rods, bearings, valve springs, both head and main studs, and possibly the harmonic balancer. I am not sure if shipping will make it cost prohibitive. If you can give me a quote to 33770.
#7
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Bolton, UK
Posts: 3,022
Total Cats: 120
Sorry for the delay. I've sent quotes to all that have expressed interest. If I missed your message, please send again.
If there's people interested in a large(r) amount of parts they go first vs 20 people taking one part obviously.
Biggest box I can send (up to ~70lbs) is $130 in shipping alone.
I have some local interest too.
Thanks again for looking
If there's people interested in a large(r) amount of parts they go first vs 20 people taking one part obviously.
Biggest box I can send (up to ~70lbs) is $130 in shipping alone.
I have some local interest too.
Thanks again for looking
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM