you need this isht
 

So I'm parting out my car, bringing it to stock and selling it. so everything aftermarket is up for sale.

- Carbon Fiber hood w/aerocatch locking hood pins - $200+ stock red hood
- Carbon Fiber Trunk Lid - $350
- Carbon Fiber Mirrors very small, and one has rash on it from something hitting it and falling off. - trade for stock red or black mirrors - SOLD
- Carbon Fiber gas lid - $20 needs a really good buff and maybe a re-clear - SOLD
- Moss low pro dual projector headlights with HID's (3500k) - $400
- Racing Beat Type 2 front bumper - SOLD to Paul
- Track dog racing Front Air splitter - SOLD to Paul
- Kyb AGX w/ FM springs & FCM 46mm bumpstops - $300 + stock
- Team Voodoo shiftknob & E-Brake handle - SOLD to Paul
- Hard Dog Hardcore Double Diagonal Roll Bar- Pending sale
- Sparco, Black, Sprint Racing Seat (driver only) rips on both side bolsters, out of date- $ 60
- Sparco, red , 3-point racing harness out of date - $30
- Turn Signal Intakes - SOLD
- 15x6.5 Konig Minuz 11lbs with ~1500 miles dz101 tires -SOLD
- 949 racing lightweight lugs (same weight as a quarter) - SOLD
- ACT stage 2 clutch w/ lightweight flywheel- $100
- Torsen LSD rear- $500 full swap + you stock setup
- 11" corrado BBK - $90
- radiator, windsheild cowl shrouds painted black -$50
- Toyota COP conversion - SOLD
- RX7 460cc - $80 PENDING SALE

Now on to the good stuff: FOR 1.6L
- Bell Engineering -S turbo kit
# Garrett GT2560 with Ball Bearings and Water Cooling
# Ceramic Coated Turbine Housing
# Cast Ductile Iron Exhaust Manifold - Ceramic Coated!
# Stainless Steel Braided Oil Supply and Coolant Lines at the Turbo
# Stainless Steel Oil Drain Line
# K & N Air Filter
# Oil Pan drill bit and tap
- Shore motorsport 3" bellmouth Absurdflow DP with 200cell metal core cat- $2000 for everything (DP alone was $760)

- 3" exhaust with dynamax muffler - SOLD
- 25x12x3 intercooler w/piping and HKS SSQV - $250
- Prosport Boost gauge - $30
- LC-1 wideband with digital gauge - $150
- Megasquirt PnP full stand alone (launch control, Flat foot shifting)
# GM EBC
# 3bar Map sensor
# GM IAT
# DB cable
# serial to usb adapter- SOLD

- Newer 5spd trans - $200
- New short throw shifter - SOLD
- Black Hardtop with brand new oem glass window - $700
- Devils own Meth Kit BNIB - $200
- Advanced auto SS Clutch line BNIB - $50
- Ignition Panel with 2 aux switches and a kill switch - $20
- Begi Cool air box with distribution block -$175
- Turbo Heat shield - SOLD
- 3 gauge din under radio (metal not plastic) - SOLD
- ARP headstuds brand new in box -$80


All i can think of for now, have a nice day

-3.5% for paypal fees on everything.
- depending on the item shipping can be included, or will work out deal, I'm not unreasonable lol

any chance you want to sell the manifold?

sorry forgot to mention its for a 1.6.....

i should have a set of OEM mirrors they are black, can you PM me picks of the CF mirrors and ill go look for teh mirrors and send you pics as well?

edit! and what state do you live in?

What color are the wheels? Im in Sacramento, are you willing to ship?

I'll take pics in the morning but sounds good. need non-power windows

Wheels are Black willing to ship, just never done it, and you pay actual shipping costs.

Shit.....the are the power type....

and damn, you live way on up there. if you were closer i would do the deal for your hood, but shipping would be teh suck :cry:

PM sent.

shipping def would be teh suck on the hood, and dammit on the mirrors! lol

well hopefully nobody snags the hood, and i can find away to get it how soon do you need everything gone?

I has manual mirrors. PM me some pics, slick. You know the number.

^^^ you suck!

soon, but not in a huge rush.

Artie sent you text playa

Passing on the CF mirrors... GL with sale. I'm not helping you take shit off. :fawk:

LIES you will help, and you will like it. unlike nick i will provide pizza!

I will take the clutch if it has life left.

Pictures of windshield cowl? Will ship to Canada?

Send me some pics of that ignition panel please.

second in line for the ignition panel, i didnt see that before.

Gas lid, and maybe heat shield shipped to 95073?

Dibs on low pro headlights, can you send me price with shipping, to Niagara Falls, ON, Canada, L2E 5H2, and i dont want the HID's so would it be cheaper? And if cf hood is still available.

Any pics of this? Scale of 1 to 10, what kinda shape is this in? Very Interested.

Rocky

pm sent for brakes, lugs, and clutch

Hard top is good shape, has all 4 latches(top and side), paint was in bad shape and my buddy just started www.drycarbonwrap.com and wanted to wrap it for cheap. Glass is brand spanking new, was purchased from mazda and professionally put in. Only problem with our transaction is i'm in NJ and you're in TN.

http://img171.imageshack.us/img171/8041/dsc02457k.jpg
https://www.miataturbo.net/showthrea...IGNITION+PANEL
^pics are here
Heat sheild is pending sale, gags lid i would do $25 shipped
Not really because i don't have regular blubs for it lol and i'll see how much shipping to Canada is and i'll pm you with exact price.

All other PM's replied too

I was looking for the OEM plastic piece. If I installed that I'd have no place to put my tools when working on the car! :)

Thanks for the pics and good luck with the sale.

lol fair enough

I have some black OEM non-power mirrors off my '91. Can you PM or post pics of the CF mirrors? Not too worried about rash depending on how bad as I could just smooth it and paint (hopefully). Thanks.

Bryan, don't you also have some aftermarket fuel rail, hks cams, and FM cam gears?

im interested in

# GM EBC
# 3bar Map sensor
# GM IAT

willing to sell separate?

also interested in the filter you have on the vc is that for sale?

also interested in the ignition panel

how much for everything shipped to 94401

Im interested on the suspension and wheels. Do you have any pictures?

fuel rail is somewhere, looking for it tomorrow.
cams and fm cams gears and the rest of that built head got sold to a local for $1000

those sensors are included in the sale of the megasquirt lol

I'd sell the filter, and the ignition panel. PM me

you got your pizza!

taht i did, but we still jest over it :giggle:

interested in your turn signal intakes. i dont have enough post to pm you so please pm me with picture

Pics of seat?

grrrr.....

yo, i just realized why you had asked about my current exhaust. DOH! are you going to be cool with swapping on this noisy thing that i have? it looks good and sounds good.....except for the rattle. let me know.

oh, and i think we deserve an explanation of why you are parting out!

Pay attention Nick. It was discussed somewhere on here. Bryan is smoking now.

yea that exhaust is fine lol, won't be my problem with it being loud lol

I want.

Ill take pics when i get home, currently at work lol

whyd you have to be all the way over there? I want the seat :(

ill take the lugs for ya. check your inbox

I can't send PM's yet but, Are the TSI's in good shape? Have they been painted?

Let me know,

Smythe

What kind of fuel rail do you have....you said you were going to be looking for it?

old dual feed vishnu rail for 1.6 at work still (till 8) so no pics or looking for anything before then lol

I'd be interested in that....let me know if you find it. If you can, pm me a pic/price when you get a chance

PM text, that I'm not allowed to send yet.

"I'll pass on the hardtop. I want VGC to near perfect, so the search continues. I dont dare buy one on CL, because most are stolen. I'll keep watching here and at Miata.net.

Good Luck.

Rocky"

BTw, for the right HT, I would travel 800-900 miles. Good examples are getting harder and harder to find.

You never got back to me on the clutch.

Willing to sell the mirrors out right also can you pm me a price on the clutch line and cowl to 22172

vgc?

turn signal intake ??? pictures

Dude, READ THE THREAD. It says he's working til 8. I didn't think it was that hard to comprehend.

I have red mirrors.. non power
will trade

let me know!!!!!!!!!!

Very Good Condition:

garaged, low mile, original owner, factory quality paint

Your price would be a low price for such an example.

The mirrors: Are these the APR cf mirrors most of the miata vendors sell for about $250?

If so, I'm interested.

Betch I called dibs

I'm willing to pay cash for the mirrors so lmk.

ok, home now, but its pouring out side. most things are still on the car so i can't take pics.
soon as its just drizzling i'll take pics of most parts people are asking for. there are pics on here of my car with the mirrors. but they aren't a close up. i want you guys to see what the one with rash looks like before you agree to anything. i'm trying to be as fair as possible.

I'm getting tons of PM's which is cool but i'm running out of space.

Also If i don't get to you right away don't think i'm neglecting you. most of my posts are from my phone just hitting refresh, I will get to you and if something is sold i will let you know not to waste your time.

I have a lot of stuff for sale, and a lot of work to pull stuff off so I'll appreciate everyone's patience.

IIRC I'm ahead of you as well, and I believe some one is ahead of me....

you still have the gas lid??? I want as well