MIATAROADSTER 3.3:1 RING AND PINION GROUP BUY
#61
any update on testing or when the gears may ship out ???????????
#62
UPDATE ON 3.3:1 GEARS GROUP BUY
I sincerely apologize for this process taking so much longer than I initially anticipated.
So far, I’ve received two prototype gears sets from the manufacturer.
Unfortunately, neither set passed bench tests performed by my diff guru, Ben Herne (DBA Puddy Mod Racing).
I'm still working with the manufacturer to refine their manufacturing process until they provide a prototype that meets my specs.
Once things get to that point, we’ll recruit a mule car local to Ben in Tampa, FL and install the gears and run them in a car.
Only after Ben gives the thumbs-up will I green-light beginning production to fulfill the group buy orders.
I’m going to these lengths because I want to be absolutely sure that I sell you something that will meet your expectations.
Thanks for your continued patience.
So far, I’ve received two prototype gears sets from the manufacturer.
Unfortunately, neither set passed bench tests performed by my diff guru, Ben Herne (DBA Puddy Mod Racing).
I'm still working with the manufacturer to refine their manufacturing process until they provide a prototype that meets my specs.
Once things get to that point, we’ll recruit a mule car local to Ben in Tampa, FL and install the gears and run them in a car.
Only after Ben gives the thumbs-up will I green-light beginning production to fulfill the group buy orders.
I’m going to these lengths because I want to be absolutely sure that I sell you something that will meet your expectations.
Thanks for your continued patience.
#64
#65
#66
Well I guess I didn't think I was really asking for any proprietary info. Just wondering if it was a material strength issue, fitment issue, etc. Just thought that might give us an indication of how easy of an issue it is for them to correct. I'd rather know now if it's a major issue so I can mentally prepare to not have them before the solo nationals.
#67
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,178
Total Cats: 1,681
Well I guess I didn't think I was really asking for any proprietary info. Just wondering if it was a material strength issue, fitment issue, etc. Just thought that might give us an indication of how easy of an issue it is for them to correct. I'd rather know now if it's a major issue so I can mentally prepare to not have them before the solo nationals.
#69
Depending on when you get a solid setup from the supplier I would also be interested as a mule. I will be assembling my built motor here soon and putting and efr 7163 on it so it will be capable of 400rwhp though I would want to test it with that power and my six speed.
#70
Thanks everyone for your understanding and patience with this tedious process!
When the time comes, I'll put out word when we need a mule.
The most likely scenario is that Ben will install a set of the new gears into a rear end that he has on hand with a good stock Torsen. He would swap that with one of the group buy participants in exchange for their stock rear end. That way, the labor for the mule is on me. But this is just a guess as to how it will go.
When the time comes, I'll put out word when we need a mule.
The most likely scenario is that Ben will install a set of the new gears into a rear end that he has on hand with a good stock Torsen. He would swap that with one of the group buy participants in exchange for their stock rear end. That way, the labor for the mule is on me. But this is just a guess as to how it will go.
#71
Bill, it's been close to 2 months, can you give us an update?
#74
UPDATE ON 3.3:1 GEARS GROUP BUY
<sigh>
Two factories in Taiwan were unable to meet my specs, so I'm back to the drawing board with a respected US manufacturer. The current ETA is now 1/15.
I'm really sorry that this is taking so long, but I'm holding out for a product that you guys will be happy with and that I'll be as proud to have my brand name on as my shifter kits.
Thanks for your patience.
Feel free to contact me directly at Bill@MiataRoadster.com because I don't always receive PMs here or notification that there's a new post on a thread.
Two factories in Taiwan were unable to meet my specs, so I'm back to the drawing board with a respected US manufacturer. The current ETA is now 1/15.
I'm really sorry that this is taking so long, but I'm holding out for a product that you guys will be happy with and that I'll be as proud to have my brand name on as my shifter kits.
Thanks for your patience.
Feel free to contact me directly at Bill@MiataRoadster.com because I don't always receive PMs here or notification that there's a new post on a thread.
#76
You should try Taylor. Bet they could help.
#78