|
AFR issue (LC-1)
2 Attachment(s)
No idea why it's not reading correctly. The brown wire was spliced into the stock o2 sensor wire, then I tried connecting it to pin 10 in mspnp center connector with no luck. LC-1 grounds and ECU ground are in the same location. (cylinder head)
LC-1 Controller was programmed (output 2) 0.0V - 10.0 AFR 5.0V - 20.0 AFR https://www.miataturbo.net/attachmen...ine=1448762168 |
Wideband is set via project properties in tunerstudio iirc.
|
It's set to innovate lc-1 default 0-5v lambda at the moment. I've also tried the other options without successes.
-Update- Switched the gauge to read lambda and it reads fine. Switch the controller setting to Innovated 0-5v 10-20 AFR and the afr gauge in TS is stuck on 10 afr |
| All times are GMT -4. The time now is 07:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands