blakemccon27

I just installed a diy pnp in my miata it started great on the first start, but it was really rich like 10-11 afr. So I looked in the fuel table and turned down the four blocks until it looked reasonable like 14ish. As I was turning it down it slowly developed this surge that would go from 400-1000 rpm. I included the tune so you guys could take a look. This is first time tuning.

Matt Cramer

Please also post a data log of the surge.

blakemccon27

Here's the log you asked for, Thanks you guys over at diy auto tune are the best.

Matt Cramer

I'm getting a message that the download failed due to a server problem. You might need to host them via Dropbox, or you can email them to me at support@diyautotune.com (just include a link to this thread in your email).

blakemccon27

sent via email

Matt Cramer

Got the log. Try flattening out the VE table in that range and adding a little more fuel. If not running sequential, trying to idle in the mid 14's is hard to pull off.