Megasquirt I v3. questions
 

Attachment 188224
Attachment 188225

Got It from another person. He said thats megasquirt I v3 board (boost control, fan control and Ign2)
So here is the picture of it and harness.
He told me that it has old configuration of fuel pump and I need to wire it to fuel relay. any other way to do it??
and how is it looks, can I install it or I need to do some mods???
and im on my way ordering neew harness.

And what about capacitor on harness. it looks like it jumped to.....

Very helpful. Forum, thanx ...

You post a single picture of your board with no real details and expect us to tell you that everything's OK? Then when we don't you, you get all butthurt. Help us to help you. Take a pic of the other side of the board. Or better yet, go to the saved post on building an MS and compare your setup to the pics there.

looks sort done correct. harness is lol. i can look at it for you, im just bad at responding to PMs.

Orange wire to the far right of the plug looks fubar.

I never deal before with Ecu, its really not to hard say hey dude make more pictures and post them. As I told there are 3 mods made like fan,boost control and ign2. Thanx brain. I just ordered new harness, may I send them to you to make pnp to stock Ecu harness? Will pay for sure and I need a base map for 550cc injcectors, 190hp fuel pump??

Or will be better if I send you Ms and harness and you can do it pnp? Braineack. If so I need address, PayPal and amount to be send?

And this is not an MSPNP, either; it is a home-built V3.0. From the pictures you posted, it doesn't seem to have anything blatantly wrong with it, but information about the MSPNP (which is a purpose built device from us) will not always be correct for what you've got since we did a couple things differently.