Hi,


I would like to get some help with the idle drop.
The idle is quite good and stable at 900rpm and is in closed loop. When I decelerate and press the clutch, the idle drops and recovers.
I use the idle advance timing and this helped a bit, but it stil drops to 660rpm for a moment and then the rpm recovers to 900rpm.
Any advice would be helpful.


Thanks

 

?

 

raise cl idle control valve dashpot so it drops to 100rpm over target then settles in.

 

ok, thans for the info!

 

I've raised the dashpot from 2 to 4,5 seconds.

I's a bit better, but still dropping too low

Also changed over run fuel cut from 1200rpm to 1650 rpm

again a bit beter but not good enough.

drops to about 700 rpm...