MS2PNP Assistance
 

Just wondering if i am able to seek some assistance in trying to get my car started with five0 motorsports 850cc injectors.

I have changed the required fuel to 3.6 and the car doesn't start unless the value is above 12 , is there something i am missing that is causing the car to not start when the req_fuel is changed ?

Timing has been adjusted as per the guide.

Specs:
t25
log mani
3inch turbo back
ev14 850cc injectors
intercooler
innovate mtxl


thanks,

Robert.

so it starts and runs if you set it at 12 or higher?

that is correct, afr is at 10.6 on idle and not stable.

Car isnt drivable and very hesitant with the throttle is touched. I have tried running autotune and that didnt help at all

that's way rich.
did you start off with one of diy's base maps and just tweak req fuel to adjust for injectors?

That is correct, got the 1999 base map from diy's website adjusted the req_fuel and it doesn't start.

data log

bump, any suggestions ?

holy crap you realize you're flooding the cylinders like crazy?
turn the req fuel back down your problem is obviously not that
have you adjusted priming fuel and cranking fuel?

That data log was with the req_fuel set to 3.6 as recommend so im not sure why it would still be flooding it.

No haven't touched adjusted priming fuel and cranking fuel, what changes should be made?

It's flooding because you have 850cc injectors and you're using stock 99 injectors settings.

All you white-males postin in a lol-thread.