ms3 mini EBC setup
 

according to https://bofiracing.co.uk/blog/ms-labs-ms3-mini-review/, I can wire a EBC in using the EVAP port in the engine bay. "EBC control via the EVAP port in the bay"

Just wondering what/where the "evap" port is if anyone has utilized this

Did you get this to work?

The black can on the passenger side is your evap canister.
If you look from the front of the car, the 2 wire plug is right behind it, can't really miss it.
Grab your multimeter and look for the 12v source, the other is the ground. Activate EBC in TS, stock OL settings (~35 in the top row) got me to like 10 or 11 psi (2560, 3" exhaust, 1.8, pierburg solenoid), but make sure you have your boost cut set to the limits of your engine.

Have fun!

Thanks man! Very helpful!

Did u have to wire up the ebc hole up to a pin on the ecu or did it work without this