ms3 mini EBC setup
01-08-2020, 11:55 AM
#1
Junior Member
Thread Starter
Join Date: May 2019
Location: Hudson, MA
Posts: 52
Total Cats: -1
ms3 mini EBC setup
according to https://bofiracing.co.uk/blog/ms-labs-ms3-mini-review/, I can wire a EBC in using the EVAP port in the engine bay. "EBC control via the EVAP port in the bay"
Just wondering what/where the "evap" port is if anyone has utilized this
Just wondering what/where the "evap" port is if anyone has utilized this
Reply
0
0
09-13-2020, 04:01 AM
#3
Senior Member
Join Date: Mar 2017
Location: GER
Posts: 762
Total Cats: 113
The black can on the passenger side is your evap canister.
If you look from the front of the car, the 2 wire plug is right behind it, can't really miss it.
Grab your multimeter and look for the 12v source, the other is the ground. Activate EBC in TS, stock OL settings (~35 in the top row) got me to like 10 or 11 psi (2560, 3" exhaust, 1.8, pierburg solenoid), but make sure you have your boost cut set to the limits of your engine.
Have fun!
If you look from the front of the car, the 2 wire plug is right behind it, can't really miss it.
Grab your multimeter and look for the 12v source, the other is the ground. Activate EBC in TS, stock OL settings (~35 in the top row) got me to like 10 or 11 psi (2560, 3" exhaust, 1.8, pierburg solenoid), but make sure you have your boost cut set to the limits of your engine.
Have fun!
Last edited by der_vierte; 09-14-2020 at 04:03 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
