Can anyone have a look at my log and see if they can suggest and tweaks please.

I'm getting a flat spot/kangaroo between 3.5 and 4.5k.

http://homepage.ntlworld.com/patrick...2015-03-09.msq

http://homepage.ntlworld.com/patrick...t/datalog2.xls
Thanks,

Pat...

 

Did you get my email Pat?

I'm not sure your NB sensor is reading properly, they're not normally stable like yours is showing.

After analysing in MLV it's wanting to take LOTS of fuel out just to reach stoich, assuming that your NB sensor is reading right it seems like you're pouring that much fuel in it's struggling to ignite, I had the same issue myself when i first installed MS all those moons ago!

In short use MLV to analyse the log and accept and burn those changes back to your MS. The issue will either get worse or better, and from that you can work out whether your NB sensor is working properly, or whether you need to tune blind

 

Cheers mate.

I thought I had burnt the map in the link to the pnp.

As far as I know, NB should be fine as before I fitted the pnp, the car was sweet.

Is it worth fitting the WB yet, or shall I get it running smooth 1st?

Thanks,

Pat...

 

Oh, and I've replied to the email.

Pat...

 

oops