Greddy compressor housing question
#1
Greddy compressor housing question
Hey folks
Getting ready to fit all the parts Ive been collecting over the past year. Picked up this used Greddy kit earlier, most parts are here but have some questions.
Heres a couple pics of the compressor housing, can you see the hole? (bottom centre) What should be in it? There are two holes in the housing, one has what appears to be like a allen grub screw in it, the other is open so it will let all the boost escape!
Getting ready to fit all the parts Ive been collecting over the past year. Picked up this used Greddy kit earlier, most parts are here but have some questions.
Heres a couple pics of the compressor housing, can you see the hole? (bottom centre) What should be in it? There are two holes in the housing, one has what appears to be like a allen grub screw in it, the other is open so it will let all the boost escape!
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,027
Total Cats: 6,593
Those holes are there to give you some flexibility in the placement of the WG can. As you clock the compressor housing, you can move the can from one hole to another.
The unused holes should all be plugged with something. Doesn't have to be a grub screw, just find a bolt and stick it in there. I'm thinking they're M8x1.25 probably.
The unused holes should all be plugged with something. Doesn't have to be a grub screw, just find a bolt and stick it in there. I'm thinking they're M8x1.25 probably.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM