Equivalent of a Greddy turbo?
Been wondering, if the Greddy turbo used the Garrett naming convention, what T2, T3, etc. would it be most closely related to size, spool, and flow wise?
|
Here's the compressor map for the TD04H-15G: http://www.stealth316.com/images/td04-15g-cfm.gif
And the specs (copied from http://www.fordlaser.com/viewtopic.p...6b5212665acf53) Compressor Wheel 15G Inducer Diameter (in.) 1.625 / 41.3 mm Exducer Diameter (in.) 2.182 / 55.4 mm Trim 55 Turbine Wheel TD04H Exducer Diameter (in.) 1.740 / 44.2 mm Inducer Diameter (in.) 2.047 / 52 mm Housing TD04H 6cm2 or AR around 0.5 See also:http://fc3spro.com/TECH/TURBO/tmodels.html Should be pretty easy to do a comparison with this data. To me, it looks a lot like a GT2259. Which is kinda depressing. |
compressor is about the same size output as a T360 or 2560. physically it's smaller. but he wheel design helps allow it to flow more.
|
All times are GMT -4. The time now is 04:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands