Equivalent of a Greddy turbo? - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

Prefabbed Turbo Kits A place to discuss prefabricated turbo kits on the market
Sponsored by:
Sponsored by:

LinkBack Thread Tools
Old 04-24-2008, 02:10 PM   #1
Elite Member
Thread Starter
iTrader: (24)
kotomile's Avatar
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,578
Total Cats: 40
Default Equivalent of a Greddy turbo?

Been wondering, if the Greddy turbo used the Garrett naming convention, what T2, T3, etc. would it be most closely related to size, spool, and flow wise?
kotomile is offline   Reply With Quote
Old 04-24-2008, 02:26 PM   #2
Boost Pope
iTrader: (8)
Joe Perez's Avatar
Join Date: Sep 2005
Location: Delicious and Moist.
Posts: 26,327
Total Cats: 1,926

Here's the compressor map for the TD04H-15G: http://www.stealth316.com/images/td04-15g-cfm.gif

And the specs (copied from http://www.fordlaser.com/viewtopic.p...6b5212665acf53)

Wheel 15G
Inducer Diameter (in.) 1.625 / 41.3 mm
Exducer Diameter (in.) 2.182 / 55.4 mm
Trim 55

Wheel TD04H
Exducer Diameter (in.) 1.740 / 44.2 mm
Inducer Diameter (in.) 2.047 / 52 mm
Housing TD04H 6cm2 or AR around 0.5

See also:http://fc3spro.com/TECH/TURBO/tmodels.html

Should be pretty easy to do a comparison with this data. To me, it looks a lot like a GT2259. Which is kinda depressing.
Joe Perez is offline   Reply With Quote
Old 04-24-2008, 02:32 PM   #3
Boost Czar
iTrader: (61)
Braineack's Avatar
Join Date: May 2005
Location: Chantilly, VA
Posts: 72,899
Total Cats: 1,792

compressor is about the same size output as a T360 or 2560. physically it's smaller. but he wheel design helps allow it to flow more.
Braineack is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 59 12-15-2017 09:00 PM
WTB MP62 (Hotside) (NB2) Rick02R WTB 3 01-03-2016 08:18 PM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
ISO 1.6 turbo cast iron manifold cale saurage DIY Turbo Discussion 16 10-01-2015 12:25 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 06:19 AM.